Offical 2004-2006 Switchblade key continued.
07-31-2008, 09:09 PM
#41
Senior Moderator
Thread Starter
Originally Posted by JCROWN
Let ME check, I am long time friends with the GM of Goodson, have sold him his son's Hockey gear for years. Let me call him tommorow and see if I can get any kind of break, hopefully i can and can get that for both of us.
ps for some reason i am unable to pm anyone? why might this be, I am a new member.
ps for some reason i am unable to pm anyone? why might this be, I am a new member.
07-31-2008, 09:11 PM
#42
Senior Moderator
Thread Starter
Originally Posted by JCROWN
So, I'm #51 on the list having paid, was just wondering when I could expect delivery? (Ballpark).
07-31-2008, 09:45 PM
#43
Three Wheelin'
Acura Carland (Duluth, GA / north of Atlanta): $110 for cut and reprogram
a bit expensive compared to what i've seen some others post here. I'll try Ed Voyles and Nalley to see what they charge.
thanks again csmeance for all your work and organization. greatly appreciated!
cheers
a bit expensive compared to what i've seen some others post here. I'll try Ed Voyles and Nalley to see what they charge.
thanks again csmeance for all your work and organization. greatly appreciated!
cheers
07-31-2008, 10:02 PM
#45
Originally Posted by csmeance
here is the thread for the locksmithsthat will cut the key, please add it to the offical thread:
https://acurazine.com/forums/showthr...68#post2130468
https://acurazine.com/forums/showthr...68#post2130468
Originally Posted by csmeance
can we please continue any discussion on key cutting in the key cutting thread linked above...
Originally Posted by holografique
Acura Carland (Duluth, GA / north of Atlanta): $110 for cut and reprogram
a bit expensive compared to what i've seen some others post here. I'll try Ed Voyles and Nalley to see what they charge.
thanks again csmeance for all your work and organization. greatly appreciated!
cheers
a bit expensive compared to what i've seen some others post here. I'll try Ed Voyles and Nalley to see what they charge.
thanks again csmeance for all your work and organization. greatly appreciated!
cheers
....Sorry, couldn't resist 
08-01-2008, 12:17 AM
#46
Q('.')=O
iTrader: (1)
JCROWN:
Helllll ya give the GM a call and see if you can get a break. That would be AWESOME. Let me know what he says... Maybe we can go in at the same time so it can be easier for them?
Also if he doesn't bring it down a lot you may want to say that Mac Churchill is charging HALF of what Goodson is.
Ya i think you need to be on for a certain amount of days and half certain amount of posts to pm. If it doesn't work you can just reply back in the key cutter/dealers thread -
https://acurazine.com/forums/showthr...68#post2130468
Helllll ya give the GM a call and see if you can get a break. That would be AWESOME. Let me know what he says... Maybe we can go in at the same time so it can be easier for them?
Also if he doesn't bring it down a lot you may want to say that Mac Churchill is charging HALF of what Goodson is.
Ya i think you need to be on for a certain amount of days and half certain amount of posts to pm. If it doesn't work you can just reply back in the key cutter/dealers thread -
https://acurazine.com/forums/showthr...68#post2130468
08-01-2008, 11:30 AM
#48
Senior Moderator
Thread Starter
Originally Posted by xen-cuts
paid at 6am this morning (friday). Hope that is quick enough to make it onto your order list???
08-01-2008, 11:46 AM
#49
[PA] NBP-TL
Join Date: Dec 2007
Location: NYC & PA
Age: 39
Posts: 446
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by csmeance
yes sir, I ordered your key and another member's keys in the morning after I saw the payments being sent in. Dealership said the supplier will have the keys to them on tuesday (since its about 75 keys)
you shuld close the website, so no more payment are sent.
08-01-2008, 11:47 AM
#50
Senior Moderator
Thread Starter
Originally Posted by clavodulce16
you shuld close the website, so no more payment are sent.
08-04-2008, 09:08 AM
#53
Q('.')=O
iTrader: (1)
Originally Posted by hoangtran9
Csmeance how's everything right now? are those key already been cut yet?
But I have to get an oil change and tires rotated soon (planning on going late next week) and it would be cool if we had them by then so I could go and get all things done at the same time
08-04-2008, 01:43 PM
#55
Senior Moderator
Thread Starter
Originally Posted by jmkiang
AJ!! Did you get my key yet? 
08-04-2008, 02:30 PM
#57
Originally Posted by jmkiang
Do mine first! 
:gheywave:
(sorry, bored at work)
:gheywave: (sorry, bored at work)
(Bored at work as well) It's gonna take more than a leghump, clap and a ghey wave..... 
1. IMJ0257
2. Trlblzr
3. Jahbless
4. Thomodochi
5. Funcman
6. Vtekken
7. Swoosh
8. Firstacuratl
9. Distorted Reality
10. Donsaxena
11. rkun934
12. nemo121
13. hoangtran9
14. tarheelblue
15. DonnieDark8221
16. Justinz71
17. holografique
18. Revolt
19. itsryanftw
20. lth8626
21. mamitaxchula
22. Nightfox.technologies
23. Cdat
24. Asianetta
25. Glowder
26. Blacktiger
27. tidus888
28. Black_dc2
29. Dads05TL
30. Aredmoon
31. nyctl
32. bclee
33. Jmkiang
34. Leedogg
35. Kris
36. AcuraJJ
37. ezland00
38. Incapower
39. Falen
40. mitchamuga
41. srt-11
42. crbonfbr
43. tungtnguyen_3
44. Maxamillion
45. Sdk2k1
46. Phenomengan
47. azianboy
48. 46.VT06TL
49. absimon
50. Morrissey1990
51. JCROWN
52. Clavodulve16
53. Laxplay11385
54. RigasMinho
55. DaveD
56. Nautica91
57. Krazeboy
58. Highspeed
59. acuratlboi
60. ryder1650
61. blatallic
08-07-2008, 01:03 AM
#64
Senior Moderator
Thread Starter
keys have been shipped out from the dealer, it should be here by monday. The shop is making another test key to be positive that it works, and I will take the key and test it in the TSX at the dealership and also a few random TL's to insure it works 100%
08-07-2008, 01:52 AM
#65
Team Hybrid
Join Date: May 2005
Location: Orange, CA
Posts: 312
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by csmeance
keys have been shipped out from the dealer, it should be here by monday. The shop is making another test key to be positive that it works, and I will take the key and test it in the TSX at the dealership and also a few random TL's to insure it works 100%
Thank you
08-07-2008, 02:03 AM
#66
Woohoo.....
Originally Posted by csmeance
keys have been shipped out from the dealer, it should be here by monday. The shop is making another test key to be positive that it works, and I will take the key and test it in the TSX at the dealership and also a few random TL's to insure it works 100%
08-07-2008, 09:46 AM
#69
iScrape going into
Originally Posted by csmeance
keys have been shipped out from the dealer, it should be here by monday. The shop is making another test key to be positive that it works, and I will take the key and test it in the TSX at the dealership and also a few random TL's to insure it works 100%
08-07-2008, 03:52 PM
#70
Oliver!!!
Originally Posted by csmeance
keys have been shipped out from the dealer, it should be here by monday. The shop is making another test key to be positive that it works, and I will take the key and test it in the TSX at the dealership and also a few random TL's to insure it works 100%
Just shoot me a PM and let me know. I'm off Monday and Tuesday next week.
08-07-2008, 05:23 PM
#72
Senior Moderator
Thread Starter
Originally Posted by litesout
If you need a TSX to test on, I'd be more than happy to drive out there and offer mine up Just shoot me a PM and let me know. I'm off Monday and Tuesday next week.
Just shoot me a PM and let me know. I'm off Monday and Tuesday next week.
08-09-2008, 08:11 PM
#75
2019 RDX Tech SH-AWD
I'm not sure what to think now that the official photos are out. I like the interior, and it's not too bad in side profile. But the grill still looks peculiar. I'll need to see it in something other than silver before I can say yea or ney.
08-10-2008, 01:57 PM
#78
Senior Moderator
Thread Starter
UPDATE- Keys will be here monday, CNC shop is being very careful with JnC's key and is taking their time to make sure that each cut is perfect for the program with which all the others will be made.
08-10-2008, 02:19 PM
#79
iScrape going into
Originally Posted by csmeance
UPDATE- Keys will be here monday, CNC shop is being very careful with JnC's key and is taking their time to make sure that each cut is perfect for the program with which all the others will be made.
... Same here can't wait