Not sure how many people know about this but the EZ lip its nothing but a garage door bottom seal!!!!! Yeap, just look it up, you could do your own with less than $15 including the two face tape. This will ruin a lot of peoples business but got to help out my AZ friends out!!!

 

If you really want to help them out youd tear the ez lip off their car.

Friends don't let friends buy EZ lips.
-ghandi or some shit

 

Some people like the way it looks. Just saying, and i know that there might be some of the here. It's just about preferences and what u like obviously some would like it and some won't.

 

Yeah it's been called the Home Depot lip on AcuraZine.

 

Yeah the Home Depot lip is an old hidden mod and should probably stay old and hidden.

 

Butt its areodynamic

 

you guise do know that you can buy the STi lips off of ebay and it will bolt right up to your car?

 

For real doe?

 

It will bolt right up

 

Not sure I like it on the TSX, but cool! Good to know!

 

there are TL examples, its just I found that example in the first 5 seconds of searching.

 

This is what it looks like on a local member's car. (I think custom work was done to make it sit right perfectly against the lip)

 

Might flow a bit better with the base lip. Maybe not who knows

 

The STi lip looks cool but save the "EZ Lip" for garage doors. It looks like shit.

 

^ +1 x 10000

 

I actually just purchased an EZ lip.





for my garage door.

 

 

Post pics when installed.

 

I have to be careful as is pulling out of the driveway/ pull out on an angle (to avoid scraping). Any extra lips on the front (and my car is on the OEM suspension) and I'll be scraping that lip every time I leave or enter the driveway.

 

make sure you plasti-dip it first. everyone's doing it.

 

Looks so damn good on that car!

 

found this pic..sti lip with real CF overlay

 

wait a darn second. will that still work with the type s A spec front lip spoiler down force abs plastic under body piece?

 

 

Fixed

 

Hmm... I might be able to get a good deal on these. Working for an Acura/Subaru dealership might pay off. Definitely gonna check it out tomorrow! I think it looks pretty good, man.

 

Have to paint it WDP.

maybe I'll slap an STI lip on it as well.

 

Attachment 107330

 

No it won't work with the type s aspec kit on. I tried it and its not wide enough. Waiting for someone to try the sti lip for the 2011-2014 sti. I think its a bit wider.

 

this its exactly what im looking for!!!!!!

 

I liked it....until I saw the gap. You can see the road right between the lip and bumper on the passenger side. Do not want.

 

Does the Sti splitter/lip bolt right up to a standard 04-06 front bumper with no lip?

 

Yes

 

Mission: FIND pics of base with STI Bubba Gump

 

I'm going to give this a shot and i'll report back. I noticed that there are two different types. One had a hump in the middle, and the other is flat all the way across but includes a second "hump" piece. Any idea which one is the preferred lip for fitting to the TL? Pics below.

#1



or #2

 

 

These are both ChargeSpeed front lips. See picture below:

Link to this dude's FS thread http://redliners.ca/forums/showthrea...ica-CF-Lip-Kit
The one everyone else does is the s204 "V Style"

Either way, The V style and MAYBE the CS lips are narrower than the TL.
Take it from someone who's dealt with 3 different kinds of Subie lips

Lastly the ones posted are slightly smaller I believe.
Get this one, still a little narrow/short but better looking than the one previously posted.

http://www.autocityimports.com/2006-...p-p-18124.html

Ask my buddy 24no7 =]

 

Any updates from the people that were going to try this?

 

now now, dont

 

I want to try an STI lip on my base 05 bumper, but it doesnt appear it will bolt right up. They have different mounting locations. I don't think it would be all that hard to modify though.