Another llumar tint thread...
#1
Instructor
Thread Starter
Another llumar tint thread...
I have read just about every tint thread I could find and still couldn't find what I was looking for. So here is the low down...
I have an 07' TL-S nighthawk black pearl and looking to get the windows tinted. I sought out a local shop that uses llumar tint and they told me they carry the ATR charcoal film and the % they offer are 30, 20 and 15. I looked on llumar's website and I see the ATR 30, 20 and 15 but the % VLT is different than what the ATR# states. I am pretty set on getting the ATR30 on all side windows (33% VLT) but i'm undecided what to get on the rear glass whether I should get the same ATR30 on the back or go one shade darker ATR20 with a %VLT of 26%. Is there anybody that has the same car with ATR30 all around or ATR30 on the sides and ATR20 on the rear glass? Please, nobody tell me I should get 5% or 15% on the sides because I don't want anything that dark, and want to keep it classy. This is why i'm contemplating whether or not to go darker on the rear glass. Please post up some pics or thoughts?
Also, is the ATR good stuff? The website just says it's high performance film.
Thanks!
I have an 07' TL-S nighthawk black pearl and looking to get the windows tinted. I sought out a local shop that uses llumar tint and they told me they carry the ATR charcoal film and the % they offer are 30, 20 and 15. I looked on llumar's website and I see the ATR 30, 20 and 15 but the % VLT is different than what the ATR# states. I am pretty set on getting the ATR30 on all side windows (33% VLT) but i'm undecided what to get on the rear glass whether I should get the same ATR30 on the back or go one shade darker ATR20 with a %VLT of 26%. Is there anybody that has the same car with ATR30 all around or ATR30 on the sides and ATR20 on the rear glass? Please, nobody tell me I should get 5% or 15% on the sides because I don't want anything that dark, and want to keep it classy. This is why i'm contemplating whether or not to go darker on the rear glass. Please post up some pics or thoughts?
Also, is the ATR good stuff? The website just says it's high performance film.
Thanks!
#3
Drifting
iTrader: (1)
Llumar ATR Series comes with a lifetime manufacturer’s warranty that covers both material and labor. This is what sold me when I was shopping for tint.
It will be just fine to put 20% on the rear windshield. You won't really notice the difference by looking. Just make sure you put the same tint on the front and rear passenger windows. Being so close/side by side, you will definitely notice the difference there.
It will be just fine to put 20% on the rear windshield. You won't really notice the difference by looking. Just make sure you put the same tint on the front and rear passenger windows. Being so close/side by side, you will definitely notice the difference there.
#4
Instructor
Thread Starter
Yes I agree all the side windows will be the ATR30. Just undecided on the rear glass...and would like to see pictures of some NBP's with ATR30 all around or ATR30 on the sides and ATR20 on the rear glass. Thanks for the replies fellas!
#5
Burning Brakes
Llumar ATR is a metallic tint which could interfere with GPS and radio signals. I just had my ’08 NBP TL-S tinted last week with 30% Llumar Axcess (ATX) which is a ceramic tint and does not interfere with the GPS and radio signals. The Llumar ATX looks fantastic with the NBP. Make sure your tint person tints behind the gasket in the small rear window in the back doors. You can check the Llumar web site for tint shops in your area. There is more to tint than just the different shades. Here is a link to the Llumar product specs.
http://www.llumar.com/pdf/en/LLumarAutoSpecsUS.pdf
http://www.llumar.com/pdf/en/LLumarAutoSpecsUS.pdf
#6
Instructor
Thread Starter
Yep, i've looked at their website and have looked at the product spec sheets. What did the ceramic tint cost you? Did you do 30% all around including the back window? Pic?
#7
Burning Brakes
Just like you I wanted to stay with the classy look, any darker would have been too dark for me. IMO it just looks better with all the windows with the same shade. I can take some picture for you this weekend.
Last edited by dj5; 07-02-2009 at 08:44 AM. Reason: additional information
Trending Topics
#8
Instructor
Thread Starter
Excellent, do you have a picture of your ride? Where did you go to get them tinted? I will be in the chicago area this weekend for the holiday....
#9
Burning Brakes
#10
Instructor
Thread Starter
Damn, aurora is a little far from where i'll be. I think i'm going to call the shop here in lafayette and see if they stock the ATX film or if they can order it for me. I would assume if they are a llumar dealer, they could order the film...
#11
Instructor
Thread Starter
I just called there and they do not have the ATX film and he would have to order a roll of it which would make my tint job like $500 he said. He also said the ATR30 meters right at 30 in contrast to the website which says 33%...although ATR30 on top of the OEM window tint would put me around 30% right? I think i'll just go with the ATR30 all the way around all 5 windows. Opinions?
#13
Instructor
Thread Starter
#17
Safety Car
iTrader: (4)
I also agree go with same percentage all around the car. Just looks better. As DJ5 said make sure they do the rear small windows correctly and get the tint behind the rubber gasket thing. I went with 35% tint all around looks great.
As far as scratching goes its just the way the car is. Some say moleskin doesnt always help either and plus thats a pain it sounds like. You gotta take off all the door panels, usually gets glue on all the windows.
The guys that tinted my car said Mercedes are the worst for scratching tint.
As far as scratching goes its just the way the car is. Some say moleskin doesnt always help either and plus thats a pain it sounds like. You gotta take off all the door panels, usually gets glue on all the windows.
The guys that tinted my car said Mercedes are the worst for scratching tint.
#18
Drifting
iTrader: (1)
I have pics all over this forum. Here's a thread with some pics.
https://acurazine.com/forums/3g-tl-photograph-gallery-96/trew-i-had-little-photoshoot-732313/
White TL is mine. Black TL is Edluv143's. He has 5% all the way around with a 50% front windshield.
https://acurazine.com/forums/3g-tl-photograph-gallery-96/trew-i-had-little-photoshoot-732313/
White TL is mine. Black TL is Edluv143's. He has 5% all the way around with a 50% front windshield.
#24
Instructor
Thread Starter
I dropped off my car last night to leave it for them to tint today since I work today and they opened at 8am and now it's 9:30am and just received a call that my car is done. 1 1/2 hrs seems really really fast to tint windows in my opinion...if he is an experienced window tinter is 1 1/2 hours about how long it takes someone that's really good or does this seem rushed? I haven't seen it yet and won't until I get off of work but I really hope he didn't rush and do a half ass job. Thoughts?
#26
Instructor
Thread Starter
My rear window should have been done in 1 piece right? Also with it being llumar tint, am I suppose to get a warranty card or what kind of warranty paperwork should I be sure to get so I can have manufacturer warranty??
#27
i just got my tint done the other day with llumar tint. i went with 30 on the sides and 15 on the back window. looks great to me! my girl went and got the same thing on her TL after she got mine. go 30/30/15
#28
Instructor
Thread Starter
Is your rear glass all 1 piece? What did they tell you or give you regarding warranty info?
#30
Instructor
Thread Starter
And I have a bad feeling this is exactly what you guys were telling me to watch out for....is this a sloppy attempt at doing the 1/4 windows? I hope this is what everybody elses looks like
#33
Instructor
Thread Starter
As i've been reading I need to call this place and ask the tint guy to redo the quarter windows I hate to call and complain, seems like i'm talking shit about his work. When I mentioned the issue to the lady at the front, she right away got really defensive saying that's how those windows are and the tinter is the best in the area. Ugh..
#35
Instructor
Thread Starter
With the help of you guys, I can show the guy pictures of these windows tinted the correct way. Can anybody on here post a closeup of their rear 1/4 windows so I can pull this thread up in the shop to show him? I really really appreciate the help, thanks guys.
#36
Instructor
I got it tint by a reputable shop here in orlando and it cost me $140 flat. He using high performance llumar series. My car is 07 WDP type S i got it 20% in front and 15% in the back. The TL rear window has to be tint the whole way, can't leave it blank out.
#37
Instructor
Thread Starter
I don't think it would be any harder tinting all the way behind the 1/4 windows than it would be tinting all the way behind any of the other windows...right? Same or similar rubber gaskets?
#38
Burning Brakes
Yep, you need to go back. The tint should go under the gasket in those windows. I would not be happy if my tint looked like that. The tint for the rear window should all be one piece.
#39
Being an Acha Bacha in
iTrader: (2)
Yup that quarter panel=Fail=an incompetent installer. And good choice with llumar I have the same on mine, however I would've suggested you go with 3M color stable as its much better quality. I had a couple of threads on this, if you search. Either way .. llumar is good too.
I'd go back but he's going to say you there is no way it can be done blah blah.. but don't listen to that shit.
I'd go back but he's going to say you there is no way it can be done blah blah.. but don't listen to that shit.
#40
Instructor
Thread Starter
Can you put up a pic of your 1/4 windows guys^^? I'll be calling in a couple hours to speak with the installer. I'll let you know how it turns out.