The 3G Ramblings & General Discussion Thread (Quattro)
#6085
Team Owner
Thread Starter
Terrible fuckin pick, flip! I KNOW you can do better. Git yo' sorry ass back outside and take some bettah ass pics befoh I beat yo' sorry ass.
#6086
Team Owner
Thread Starter
Can't even see dat gap.
And dat lighting.
And dat contrast.
And dat lighting.
And dat contrast.
![Spanky](https://acurazine.com/forums/images/smilies/spankie.gif)
#6090
iWhine S/C 6MT TL
iTrader: (1)
![](http://s2.quickmeme.com/img/9e/9e91c0d37bbcf84fbdf1bf9280ec18d2a8e334ad3bcc6184b0bc974b5c8f24b8.jpg)
I would invest in quality wheel spacers. This thread, has some great information on the quality of wheel spacers. https://acurazine.com/forums/tires-w...pacers-847923/
Here is some of the information I used from that thread.
Project Kics
Sizes: Available as small as 10mm (generally recommended to stay 15mm or thicker)
Material: "Forged Monoblock Duralumin Material"
Studs: Unknown
Construction: Hubcentric, pressed in centering ring (2-piece), pressed in studs (centering ring has to be ordered seperately but is included in the cost below)
Origin: Japan
Warranty: 1 year
Customer Service: Unknown
Failures: Unable to find examples
Cost: $249.48/pair and up shipped (per Evasive Motorsports)
Adaptec Speedware
Sizes: Available as small as 15mm, Can also be manufactured to adapt to different bolt patterns
Material: Alcoa (USA) 6061-T6 Billet Aluminum
Studs: 10.9-grade
Construction: Hubcentric, single milled billet, pressed in studs
Origin: Made in the USA
Warranty: Lifetime, good reputation
Customer Service: Less than ideal reputation
Failures: Unable to find examples
Cost: $155/pair and up shipped (per Motorsport Tech)
H&R Trak+ Spacers
Sizes: "DRM type" Available as small as 15mm
Material: Proprietary Aluminum/Magnesium Alloy (lighter & higher strength than 6061-T6)
Studs: 10.9-grade
Construction: Hubcentric, single milled billet, pressed in studs
Origin: Germany
Warranty: 1 year
Customer Service: Unknown
Failures: Unable to find examples
Cost: $139.44/pair and up shipped (per Evasive Motorsports)
Ichiba Spacers
Sizes: Available as small as 15mm
Material: Aluminum/Magnesium Alloy (likely 6061-T6 like the rest)
Studs: Unknown
Construction: Hubcentric, pressed in centering ring (2-piece), pressed in studs
Origin: Made in China
Warranty: Unable to confirm length, less than ideal reputation
Customer Service: Less than ideal reputation
Failures: Examples are out there
Cost: $128.25/pair and up shipped (per eBay)
DMV Motorsports (eBay)
Sizes: Available as small as 15mm
Material: 6061-T6 Billet Aluminum
Studs: 10.9-grade
Construction: Hubcentric, pressed in centering ring (2-piece), pressed in studs (listing shows one piece construction)
Origin: Unknown
Warranty: Unknown
Customer Service: Unknown
Failures: Unknown
Cost: $77/pair and up shipped (per eBay
Akata Spacers
Sizes: Available as small as 12mm
Material: Unknown
Studs: 10.9-grade
Construction: Hubcentric, single milled billet, pressed in studs
Origin: Unknown
Warranty: 1 year, less than ideal reputation
Customer Service: Less than ideal reputation
Failures: Examples are out there
Cost: $74.95/pair and up shipped (per eBay)
"chaching8899" (eBay)
Sizes: Available as small as 15mm
Material: 6061-T6 Billet Aluminum
Studs: 10.9-grade
Construction: Hubcentric, single milled billet, pressed in studs
Origin: Asia
Warranty: Nothing formally issued with parts
Customer Service: Good reputation
Failures: Only one failed by defect over the last 4 years, was replaced by seller
Cost: $58/pair and up shipped (per eBay)
I went with the adaptive speedware for my TL. It's legit in quality.
#6091
Moderator
Join Date: Aug 2014
Location: Dirty H-Town, Amerikkka
Posts: 28,432
Received 7,772 Likes
on
5,045 Posts
![Coffee](https://acurazine.com/forums/images/smilies/coffee.gif)
![Wave](https://acurazine.com/forums/images/smilies/wave.gif)
#6092
Race Director
iTrader: (1)
I think I may do 15mm in the rear and 10 in the front. :/
Been looking at my fitment and since the cars getting boring I need to do stuff to make her fresh to my eyes again.
Been looking at my fitment and since the cars getting boring I need to do stuff to make her fresh to my eyes again.
#6093
Race Director
iTrader: (1)
Or 20/15... ![Scratch](https://acurazine.com/forums/images/smilies/scratch.gif)
Maybe I should pickup a pair of wrx's 15mm adaptecs on the BM.
![Scratch](https://acurazine.com/forums/images/smilies/scratch.gif)
Maybe I should pickup a pair of wrx's 15mm adaptecs on the BM.
#6095
Race Director
iTrader: (1)
Yea that's why I adjusted and went with 20/15 so I can do v2...
Too lazy for v1 lol
Too lazy for v1 lol
#6096
iWhine S/C 6MT TL
iTrader: (1)
I did 15mm all around. It's about an inch out more.
#6097
Race Director
iTrader: (1)
So maybe his 4x15mm adaptecs for $150 is a good deal?
Are your wheels offset staggered for the rear difference?
Are your wheels offset staggered for the rear difference?
#6098
Race Director
iTrader: (1)
Hmm hope I'm reading everything correctly. I don't think I'll need a fender roll with 15mm all around with my drop/wheels.
Think I'm gonna do it.
Think I'm gonna do it.
![Wish](https://acurazine.com/forums/images/smilies/wish.gif)
#6099
Race Director
iTrader: (1)
Throw my current 7mm/5mm on the wife's Civic? ![Big Grin](https://acurazine.com/forums/images/smilies/biggrin.gif)
Wonder if they'd fit. Haha
![Big Grin](https://acurazine.com/forums/images/smilies/biggrin.gif)
Wonder if they'd fit. Haha
#6100
iWhine S/C 6MT TL
iTrader: (1)
175 x 2
They might cut you a break if you order 4 at once.
If you order from them, they are made for you. In other words, every single order is made. They want to make sure it's done correctly and inspected after they finish them. That was a huge plus for me, which is why I went with them. I've had them on my TL for 2 years and I'm ocd about these things. I inspect them every single time the wheels come off. Everything is solid.
#6101
Race Director
iTrader: (1)
I meant there is a set of (4) 15mm adaptec v2 in the black market right now for $150 shipped. So that IS a good deal.
#6105
Team Owner
Thread Starter
Personally, I'm getting 45mm spacer up front and 10mm spacer in the back.
#customlyfe
#customlyfe
#6106
Team Owner
Thread Starter
#6109
Race Director
iTrader: (1)
you a messican?
#6110
Race Director
iTrader: (1)
Justn must get ALL THE LADIES with a mug like that.
#6111
Team Owner
Thread Starter
que?
#6113
Team Owner
Thread Starter
I must be the only one who thinks he looks like Dre ![Dunno](https://acurazine.com/forums/images/smilies/dunno.gif)
I can't unsee it now.
![Dunno](https://acurazine.com/forums/images/smilies/dunno.gif)
I can't unsee it now.
#6114
Race Director
iTrader: (1)
^Yes.
Ladies != ladybois
Ladies != ladybois
#6115
Team Owner
Thread Starter
Chad, are you feuding with him too? Can't we all just get along and be frendzzzz? :gheyhug:
#6116
Race Director
iTrader: (1)
I'm not aware I'm feuding with anyone at the moment...
J, if I sell your car, I expect favors.
J, if I sell your car, I expect favors.
![MMM](https://acurazine.com/forums/images/smilies/mmm.gif)
#6117
Team Owner
Thread Starter
we're still waiting for pics from your wife's photo shoot...
![Bored](https://acurazine.com/forums/images/smilies/bored.gif)
#6120
Race Director
iTrader: (1)
So am I....so am I. ![Wish](https://acurazine.com/forums/images/smilies/wish.gif)
Maybe I'll get her to recreate some of the hot St Lucia pics in Puerto Rico next week.
![Wish](https://acurazine.com/forums/images/smilies/wish.gif)
Maybe I'll get her to recreate some of the hot St Lucia pics in Puerto Rico next week.
![MMM](https://acurazine.com/forums/images/smilies/mmm.gif)