Drilless Front License Plate Options for 2010 TSX
#1
Drilless Front License Plate Options for 2010 TSX
Hello,
I'm new to the forum and looking for some help. I'm trying to find a good solution for mounting the front license plate to my 2010 TSX without drilling into the front bumper. I'd prefer not to use the stock holder since if only secured to the grill below it tends to bounce up and down, scratching the bumper.
Any recommendations?
I'm new to the forum and looking for some help. I'm trying to find a good solution for mounting the front license plate to my 2010 TSX without drilling into the front bumper. I'd prefer not to use the stock holder since if only secured to the grill below it tends to bounce up and down, scratching the bumper.
Any recommendations?
#4
Burning Brakes
#7
Everyday I'm rofling
1.) Double sided tape some felt or something between bumper and bracket and keep it in the stock location.
2.) Move to lower grille like I did. I just cut two squares out of scrap metal and drilled a hole in the middle and bolted it to the bracket.
2.) Move to lower grille like I did. I just cut two squares out of scrap metal and drilled a hole in the middle and bolted it to the bracket.
![](https://i1157.photobucket.com/albums/p590/opboarding/IMAG0595.jpg)
The following 2 users liked this post by opboarding:
gonzo08452 (06-13-2013),
TSXV6Guy (06-13-2013)
Trending Topics
#8
Everyday I'm rofling
Or check this thread out for a few good options.
https://acurazine.com/forums/ilx-382/ilx-front-plate-mounting-options-889374/
https://acurazine.com/forums/ilx-382/ilx-front-plate-mounting-options-889374/
Thread
Thread Starter
Forum
Replies
Last Post
darksky
3G TL Problems & Fixes
2
09-05-2015 03:11 AM
Mugen TSX
Eastern Canada
0
09-01-2015 11:05 PM