Ssjoeboe9's Development Thread
#481
ROTAREDOM
Thread Starter
It doesnt really hang lower.. It kinda just fits over top. I did a quick test fit. Ill upload the photo. If it is any lower than the max would be the thickness of the lip which is ~1 cm
The following users liked this post:
ed_423 (08-09-2012)
#482
ROTAREDOM
Thread Starter
Lol I could do some clearing for ya. I could probably do both lights in under 4 hours. That's total time from taking the lights out to installing your last clip in your bumper. I was nervous doing it too, but I bought my LED switchbacks and when I got them in the mail it was enough encouragement to get it done. I think the biggest thing that helped me out besides kowloons DIY was the fact that I got everything prepared before I started. Clearing an area to work, getting plastic cups and labeling each cup for all the clips and screws, and having a partner to help in splitting the light open. The lights cool pretty quickly, you have like 1:00 to 1:30 minutes to get it open before the glue cools down. But really it's not bad at all. You can do it man!
#483
ROTAREDOM
Thread Starter
here is a picture I snapped on my iphone... I guess it doesnt really help much haha. do you guys like black?
#484
SeeYou2Crew #2
thanks for the pic joe gives me a rough idea of how much lower it hangs..which like you said, it's not much lol.
this is when its warped right? i can see the front is a bit warped haha
cf vinyl that lip to match the grille and save on paint??
and are you gonna cut out the holes up in the front?
this is when its warped right? i can see the front is a bit warped haha
cf vinyl that lip to match the grille and save on paint??
and are you gonna cut out the holes up in the front?
#485
ROTAREDOM
Thread Starter
thanks for the pic joe gives me a rough idea of how much lower it hangs..which like you said, it's not much lol.
this is when its warped right? i can see the front is a bit warped haha
cf vinyl that lip to match the grille and save on paint??
and are you gonna cut out the holes up in the front?
this is when its warped right? i can see the front is a bit warped haha
cf vinyl that lip to match the grille and save on paint??
and are you gonna cut out the holes up in the front?
I thought about doing vinyl but the problem is when you buy a sheet that long you end up getting so much more vinyl than you need since it comes in a square, It would be nearly $150 to get the appropriate size.
I have thought about cutting out the holes and putting some LED's but I thought if I was going to that I would wait and do it later.
#486
Everyday I'm rofling
you have one of them fancy overpriced japanese ropes???
#487
ROTAREDOM
Thread Starter
The following users liked this post:
ttk5 (08-10-2012)
#490
Everyday I'm rofling
#492
ROTAREDOM
Thread Starter
I'm afraid of what the legit japanese guys at work will say haha. I can try and get a side shot up jeroplex but the iPhone pix are all I have so bear with me cause the quality and lighting isn't very good.
#493
ROTAREDOM
Thread Starter
I think I tied it pretty well though don't u think? Opinions!?
#494
Everyday I'm rofling
The following users liked this post:
ssjoeboe9 (08-09-2012)
#495
ROTAREDOM
Thread Starter
Sorry the sides shots aren't that great. Ill try and get some better shots on sunday. Oh and I def have to upload a small detail imprinted on the metal clips. I think you guys will find it funny, I chuckled a little when I saw it.
Hope these help
Hope these help
The following users liked this post:
ssjoeboe9 (08-09-2012)
#498
Burning Brakes
Hmmmm...that lips look great...like ED said is it bulky pics from the side please
Im trying to price it out...(thought process)OEM Sports bumper lowest is $610 shipped
--the type s lip you have there plus paint and I might as well add a roof spoiler to get them painted the same time...around lets say $500
Decisions..decisions!!! Damn it Joe I was sold on the OEM sports bumper till I saw this replica fitment --- looks good
Im trying to price it out...(thought process)OEM Sports bumper lowest is $610 shipped
--the type s lip you have there plus paint and I might as well add a roof spoiler to get them painted the same time...around lets say $500
Decisions..decisions!!! Damn it Joe I was sold on the OEM sports bumper till I saw this replica fitment --- looks good
#499
ROTAREDOM
Thread Starter
Yeah so total cost after everything is done and painted will be $380.... not the worst price for a cool add on. Just wish some of these pieces would come paint matched already. Im paying more than twice what the lip cost to get lip painted I dont know what I'm going to do about my roof spoiler if/when I ever finish that cause I wanted to get that paint matched too but even doing it yourself comes out to be $150 for all of the materials you will need. Maybe I'll just wrap it in CF.
I'm just glad I made the purchase cause only a handful of people have this part. hopefully update you guys with it fully installed and painted in 2 weeks or so.
I'm just glad I made the purchase cause only a handful of people have this part. hopefully update you guys with it fully installed and painted in 2 weeks or so.
#502
ROTAREDOM
Thread Starter
Yeah dude I think the cheapest I could get it done professionally would be around $200, anything less than that for PWP is not realistic. The pearl is what drives the price up so much.
I did look into doing it myself, 2 aerosol cans of 11oz PWP comes out to be 99.99 before shipping. Then I have to add on primer and clear coat. All together ends up being $150 to do myself. So I save $100 but go into the project not knowing if it will come out correctly. I would rather spend the extra $100 and get it right.
$130- lip shipped from ebay +$250 paint matched= $380.
I'm going to install it myself to save money there, hopefully that won't be too hard.
@grigio- LED switchbacks I got from VLEDS.com I recommend getting the larger one for $20 more because those "supposedly" don't require resistors. (and they are brighter)
I did look into doing it myself, 2 aerosol cans of 11oz PWP comes out to be 99.99 before shipping. Then I have to add on primer and clear coat. All together ends up being $150 to do myself. So I save $100 but go into the project not knowing if it will come out correctly. I would rather spend the extra $100 and get it right.
$130- lip shipped from ebay +$250 paint matched= $380.
I'm going to install it myself to save money there, hopefully that won't be too hard.
@grigio- LED switchbacks I got from VLEDS.com I recommend getting the larger one for $20 more because those "supposedly" don't require resistors. (and they are brighter)
#503
ROTAREDOM
Thread Starter
Look at what was imprinted on the metal tabs lol
Also Ed, I couldn't really tell if your tabs were already installed or not but this is what they should look like.
Also Ed, I couldn't really tell if your tabs were already installed or not but this is what they should look like.
#505
Yeah, PWP is a weird color. When I bought touch-up paint, there were actually two tubes. Grigio touch-up paint only came in one tube.
Look forward to seeing the final product.
Look forward to seeing the final product.
#506
ROTAREDOM
Thread Starter
I'm absolutely positive it will come out great though.
I'm too addicted man, I fall asleep thinking about which mods would look good on the car and future set ups.
I hope to still see you active MrO. I always enjoyed seeing pictures of your ride.
The following users liked this post:
MrOtocinclus (08-11-2012)
#507
Burning Brakes
iTrader: (1)
[QUOTE=Grigio09;13972096]http://www.v-leds.com/6K-TYPE-2-DUAL...2059-1-2.html#
I think I found the ones you were talking about. No need for resistors here right?
I think I found the ones you were talking about. No need for resistors here right?
#508
ROTAREDOM
Thread Starter
After driving my brothers 1st gen for a week I was so happy to finally get my baby back!
#509
Everyday I'm rofling
look at you go!
#510
ROTAREDOM
Thread Starter
I'm very happy with the result, probably this weekend I'll cut out some CF vinyl to put in the little caves of the lip.
The following users liked this post:
ssjoeboe9 (08-24-2012)
#513
ROTAREDOM
Thread Starter
yeah they did a great job! I'm very pleased, I just need a car wash to make it look FRESH!
I guess I need to finish up my roof spoiler now lol
I guess I need to finish up my roof spoiler now lol
The following users liked this post:
ssjoeboe9 (08-25-2012)
The following users liked this post:
ssjoeboe9 (08-25-2012)
#517
The lip is great, guite similar to the german type s lip as mine for example BUT n my eyes the acuragrill makes the face feeling so harmless instead the lip gives the face an agressive look. So for me it would look way better with a mesh grill or something like that. Also im not a friend of those eyelids. Remove them and change the grill to something more agressiuve and he front is perfect.
Just my 2 cents.
Just my 2 cents.
Last edited by hOnDaBeAsT_4life; 08-25-2012 at 02:17 AM.
#518
ROTAREDOM
Thread Starter
The lip is great, guite similar to the german type s lip as mine for example BUT n my eyes the acuragrill makes the face feeling so harmless instead the lip gives the face an agressive look. So for me it would look way better with a mesh grill or something like that. Also im not a friend of those eyelids. Remove them and change the grill to something more agressiuve and he front is perfect.
Just my 2 cents.
Just my 2 cents.
I like the eyelids, but right now they are kinda serving a dual purpose. I like them most importantly, and secondly I'm getting some bad cataracts in that area of my headlights, I figured this would be a good way to cover it up and look stylish at the same time. I can't believe my baby is showing signs of aging :/
Last edited by ssjoeboe9; 08-25-2012 at 10:26 AM.