Ssjoeboe9's Development Thread
#441
ROTAREDOM
Thread Starter
You're lucky you get to surf azine at work lol but I can take more pictures of the spoilers, I just glassed the edges and need to clean it all up. I'll post more today. Or at least try.
#443
ROTAREDOM
Thread Starter
about $550 for all 4. The rear were a little more expensive, by like $25 or something.
#444
ROTAREDOM
Thread Starter
I know it's not flush yet but after a little bending and 3M tape it should mount correctly. If you have a little imagination you can this is going to look pretty good.
PREVIEW:
PREVIEW:
#445
Everyday I'm rofling
Looks pretty lumpy, I predict many hours of sanding in your future. This is a pretty tough project, you just have to take it one step at time.
#446
ROTAREDOM
Thread Starter
Yes, it is a little lumpy but that's ok. It just needs to be "about" flat, once you lay the bondo over the glass that's when you get it really smooth. I got a buddy who is really good with fiberglass and bondo. He is gunna help me out. Still needs some work, but this is my update thread so you guys get to see my progress.
#448
type-s lip?
#449
Everyday I'm rofling
Yes, it is a little lumpy but that's ok. It just needs to be "about" flat, once you lay the bondo over the glass that's when you get it really smooth. I got a buddy who is really good with fiberglass and bondo. He is gunna help me out. Still needs some work, but this is my update thread so you guys get to see my progress.
#453
ROTAREDOM
Thread Starter
Type-S lip, I bought it for myself as a birthday present lol... My plan is to get both my lip and roof spoiler paint matched at the same time. It'll give me incentive to finish up my spoiler that way I can get my lip mounted.
#455
ROTAREDOM
Thread Starter
no- I wanted the fitment so I got it shipped overseas
Just playing, its replica lol.
Just playing, its replica lol.
#457
ROTAREDOM
Thread Starter
I bought from best racing, cause what's his name just got one that looked like it fit really well. I was waiting until I saw his and was like YUP, then I bought it the next day.
The following users liked this post:
drivedata (07-26-2012)
#461
Burning Brakes
this is the one you got right
http://www.ebay.com/itm/09-10-TSX-4d...item5892270460
http://www.ebay.com/itm/09-10-TSX-4d...item5892270460
#462
Burning Brakes
#463
ROTAREDOM
Thread Starter
Yes, to jeroplex about ebay seller, and yes to whats his name. And to defcon, if everyone else made it fit, i'll make it fit. Didn't you have to do some bending too?!
#465
ROTAREDOM
Thread Starter
I haven't even seen it yet, I sent it to my parents house because my apartment complex doesn't handle fragile/expensive/large packages very well. I have been thinking about customizing the the lip as well.
This evo is inspiring
This evo is inspiring
#466
Drifting
mine wasnt sitting that high off the glass though. i can flex it a little bit just enough to epoxy it to the window permanently.
#467
ROTAREDOM
Thread Starter
#469
The lip in the ebay auction looks like the OEM european Type S lip. Dont know the qualitiy and fitment about the one in the auction but the OEm in germany is PERFECT. But does cost 400,- bucks here. i got used one for 125,- + 50,- paintjob. I know one here who is selling his lip already painted in volcano gray NH-637M for 200,-
Henric
Henric
#470
ROTAREDOM
Thread Starter
I wish I could afford the real thing, but I can't drop that much when I can get a replica that looks just about as good.
Defcon- I know it seems like I won't be able to set it flush but I have a method lol. I store it balancing on my bondo can and set my heavy steel toe shoes on either end of the spoiler and it slowly gets shaped to the way I want it hahaha. Plus you don't actually have to apply that much pressure for it to form to the glass, I think 3M can handle it.
Defcon- I know it seems like I won't be able to set it flush but I have a method lol. I store it balancing on my bondo can and set my heavy steel toe shoes on either end of the spoiler and it slowly gets shaped to the way I want it hahaha. Plus you don't actually have to apply that much pressure for it to form to the glass, I think 3M can handle it.
#471
SeeYou2Crew #2
The lip in the ebay auction looks like the OEM european Type S lip. Dont know the qualitiy and fitment about the one in the auction but the OEm in germany is PERFECT. But does cost 400,- bucks here. i got used one for 125,- + 50,- paintjob. I know one here who is selling his lip already painted in volcano gray NH-637M for 200,-
Henric
Henric
you got PM good sir
The following users liked this post:
ssjoeboe9 (08-02-2012)
#473
ROTAREDOM
Thread Starter
hmmmm I didn't realize that it was only on the sides, I might be ok with that lol. I thought I would have to drill through the front but I don't really mind at the wheel well. What are the little tabby things doing at the front of the lip? Just to hold it tight to the bumper?
#474
SeeYou2Crew #2
whoa thanks for the pic!
once ssblowjob install his, and it fits great, i will get it from the same vendor.
there's another vendor down here at LA that sells it too...but idk how it fits. they say i can test fit though so might just do that...
once ssblowjob install his, and it fits great, i will get it from the same vendor.
there's another vendor down here at LA that sells it too...but idk how it fits. they say i can test fit though so might just do that...
#475
ROTAREDOM
Thread Starter
Hey ed, I can tell you right now some bending will be necessary just because of the way they ship it. They literally wrapped it up in 10,000 small usps boxes. BUTTT the good thing is that it's polyurethane and can easily be shaped correctly. Gotta figure out whether or not I'll be painting it myself or getting it professionally done.
#476
Burning Brakes
iTrader: (1)
hmmmm I didn't realize that it was only on the sides, I might be ok with that lol. I thought I would have to drill through the front but I don't really mind at the wheel well. What are the little tabby things doing at the front of the lip? Just to hold it tight to the bumper?
It is to hold the bumper tight. And you have to definitely leave the bumper out in the sun let it bend...It came a little warped..
#477
SeeYou2Crew #2
Hey ed, I can tell you right now some bending will be necessary just because of the way they ship it. They literally wrapped it up in 10,000 small usps boxes. BUTTT the good thing is that it's polyurethane and can easily be shaped correctly. Gotta figure out whether or not I'll be painting it myself or getting it professionally done.
#478
ROTAREDOM
Thread Starter
DUDE good idea lol, it's so hot in FL I'll be able to shape that thing correctly in about 5 min. Thanks for the tip. Ed, it's gunna be legit when I get it painted.