My new wagon
#1
My new wagon
Hello all, I purchased the TSX wagon and I want to fix it up a little. Since I transitioned from Full JDM S14 Kouki with LS1 V8 to TSX wagon, I already had the itch to build it up. However, this time I want to keep it simple and clean. Nothing extreme.
So far, All I did was the H&R springs. Since the springs were made for the sedan, the rear sat lower than the front. I ended up cutting 1 coil from the front and now it is perfect height IMO.
stock:
So far, All I did was the H&R springs. Since the springs were made for the sedan, the rear sat lower than the front. I ended up cutting 1 coil from the front and now it is perfect height IMO.
stock:
The following users liked this post:
nmssr08 (08-03-2013)
The following users liked this post:
nmssr08 (08-03-2013)
#5
TSX AMG Type //M i-VVT
You cut the springs?
#6
Trending Topics
#9
Congratulations. The wagon looks good in BWP.
#10
#11
It's been a little while but I decided to get a coilover system. I liked the H&R springs but I got a awesome deal on some Function and Form Type1... I kept the ride height the same as the H&R height for now...
Bought a 25mm spacer kit for the rear to fill in the gap.... This will do for the time being while my wheels are being built. The rear fenders are rolled.
Bought a 25mm spacer kit for the rear to fill in the gap.... This will do for the time being while my wheels are being built. The rear fenders are rolled.
Last edited by nmssr08; 09-05-2013 at 11:27 PM.
The following users liked this post:
PPower (09-14-2013)
The following users liked this post:
nmssr08 (09-06-2013)
The following users liked this post:
nmssr08 (09-06-2013)
#15
Intermediate
I've really been wanting to do this for a while, but Accord tips just never seemed to look right, the S2k ones look perfect, where'd you get them from?
#16
I bought it off ebay. But I know you can get them through parts department. Its like $65 each new. I got it for $60/pair
#17
Looks great! I also went with the AP2 tips. Looks great on the wagon for sure. Heres a shot of mine.
#19
TSX AMG Type //M i-VVT
Ap2 tips looks great. Now if i only i could find somewhere to buy them...
#20
Racer
Any more views of the stock wheels on spacers? It looks darned good. Also, even though I thanked you above for showing me those tips, I hate you that I now need a pair of them. That makes such a nice and subtle difference.
#22
TSX AMG Type //M i-VVT
Good luck finding them... I still can't find AP2 tips anywhere.
The following users liked this post:
nmssr08 (09-15-2013)
#24
#25
If you really need to get them I know you can buy them from Honda directly. Here is the part number for it. They are little expensive but it's direct bolt on to our exhaust tip
18310-S2A-A02 - FINISHER, EX. $62.21 (per side)
18310-S2A-A02 - FINISHER, EX. $62.21 (per side)
The following users liked this post:
nmssr08 (09-15-2013)
#27
Here are some ebay exhaust tips for sale right now. This is great price... and I actually bought it from this seller.
http://www.ebay.com/itm/2-Factory-OEM-Honda-Accord-S2000-Acura-TSX-Lexus-IS250-350-finisher-muffler-tips-/161096482204?pt=Motors_Car_Truck_Parts_Accessories&hash=item2582193d9c&vxp=mtr
http://www.ebay.com/itm/2-Factory-OEM-Honda-Accord-S2000-Acura-TSX-Lexus-IS250-350-finisher-muffler-tips-/161096482204?pt=Motors_Car_Truck_Parts_Accessories&hash=item2582193d9c&vxp=mtr
The following users liked this post:
PPower (09-15-2013)
#29
Racer
Here are some ebay exhaust tips for sale right now. This is great price... and I actually bought it from this seller.
2 Factory Honda Accord S2000 Acura TSX Lexus IS250 350 Finisher Muffler Tips | eBay
2 Factory Honda Accord S2000 Acura TSX Lexus IS250 350 Finisher Muffler Tips | eBay
Interesting that the V6 Accord tips are the same as S2000.
#30
#31
So I finally got my new wheels last month. Work Gnosis HS203 in BRU finish. Fronts are 19x9 +30 Low Disk, Rears are 19x10 +30 Low Disk. Tires are F: 235/35R19 and R: 245/35R19. I have always been a big fan of Work Wheels ( I had it on my S14, AE86) due to it's design simplicity, quality, customer support. Anyway, here is the pics:
and here is what it looks on the car:
and here is what it looks on the car:
#32
After I installed the wheels, I thought it was way too simple and plain look. so I decided to add a little touch of color....
Using my airbrush kit for my RC cars, I painted the center caps with a House Of Kolor Kandy Apple Red. Since the Candy color is transparent and caps have that brushed effect, I had to scuff the surface in the same direction as the brushed mark to keep the same effect.....
and what it looks like on the wheel:
Using my airbrush kit for my RC cars, I painted the center caps with a House Of Kolor Kandy Apple Red. Since the Candy color is transparent and caps have that brushed effect, I had to scuff the surface in the same direction as the brushed mark to keep the same effect.....
and what it looks like on the wheel:
#33
I decided to lower the fronts just a bit more. Although my front fenders are rolled and slightly pulled, with this height I still rub when my wheels are turned and going up a driveway. I think I should go with a 225/35R19 setup in the fronts next set. I am in the process of getting airbag suspension setup in the near future. But in the mean time here is my car:
#35
Everyday I'm rofling
Looks great!