Matching Paint Grill
#41
OEM grill part #: 71122-TL2-A00
Cost: $150-$200 depending on where you look.
Cost: $150-$200 depending on where you look.
#42
Intermediate
Join Date: May 2010
Location: Romania
Age: 44
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
and OT i have same colour (buran silver - in Europe) and because is a diff. colour i prefer to keep the original nickel grid.
one to another...
#43
#44
Would anyone know where I can get the oem paint or close enough to match my Night Hawk Black paint. I painted mines gloss black but it did not look right since my car is bluish in the sun which throws the black off. Thanks.
#46
Drifting
seems like youre going to do a DIY paint job?
yea just go to a local auto body shop and tell them to mix you the OEM paint. they will find the OEM color code and do the paint in house. it should cost you about $60-$75 for the paint itself.
#47
Intermediate
Join Date: May 2010
Location: Romania
Age: 44
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
u can find the paint code on the door post is an engraved plate under the vin is the color code, tell this code to a auto body shop / some 1 who can mixt and prepare that for u.
good luck!
in many cases this paint wont match100% so ul have to polish all te car after u paint a part, because the sun affects the coat of the paint that "burns" it a bit...
good luck!
in many cases this paint wont match100% so ul have to polish all te car after u paint a part, because the sun affects the coat of the paint that "burns" it a bit...
#49
Mademoiselle Chanel!!
#50
Mademoiselle Chanel!!
www.stickercity.com its $30 for 12in x 48in
its 3D textured carbon fiber vinyl. 3M di-noc.
make sure to use a heat gun
here's more close ups and angles. i did some eye lids too.
its 3D textured carbon fiber vinyl. 3M di-noc.
make sure to use a heat gun
here's more close ups and angles. i did some eye lids too.
#52
Thanks for the reply guys, I came across this on one of the threads I found http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMEWAX%3AIT anyone ever tried these before?
#54
Midwest TSXer
iTrader: (1)
How are you getting the front grill off the car? I need to have the upper grill either painted or replaced. The clear coat is peeling off and the chrome has since started to rust/turn blackish. I can see there are four screws on the backside of the grill looking through the top, but couldn't figure out how to take off the entire grill (if it actually all needs to come off) by looking at it?
#55
You have to take off the front bumper to remove the grill. Search around for instructions on how to install the Aero bumper, the first few steps show you how to remove the front bumper.
#57
Three Wheelin'
http://www.ct-engineering.com/store/product1564.html
#61
Instructor
no you dont have to take the bumper off. i took my grill off in 20 mins, pop the hood, pop he pins that hold down the plastic over the grille, lift it up and there are 4 clamps and 2 small screws you have to loosen right near the headlights. go to local home depot and ask for an alen key with a phillips head tip and youll be able to get to the screws without removing the bumber, , under the grille theres 4 more clamps holding the grille behind the grille at the bottom, 2 at the middle and one in each corner of the bottom of the grille, pop those out and grille comes right out. , ill post up instructions with pics
The following users liked this post:
ojasdatt (06-22-2012)
#64
I'd be interested to know the answer to this question as well. Since I really like the all black look I was thinking of using the finished look of the CT Engineering carbon fiber replacement blade with the DiNoc wrap on the trim.
#66
click on the link to see how to remove the grille on a 2009-10 tsx.
http://www.carid.com/images/grilles/...ion-manual.pdf
Click in this link to see how to remove the grille on the 2011 model:
http://www.carid.com/images/grilles/...ion-manual.pdf
Hope this helped!
http://www.carid.com/images/grilles/...ion-manual.pdf
Click in this link to see how to remove the grille on the 2011 model:
http://www.carid.com/images/grilles/...ion-manual.pdf
Hope this helped!
The following users liked this post:
ojasdatt (06-22-2012)
Thread
Thread Starter
Forum
Replies
Last Post
detailersdomain
Wash & Wax
3
10-09-2015 10:13 PM