Turbo build 2009 tsx k24z3
#201
Just read this entire thread from page 1-6. Just want to say awesome work for pioneering something only some could dream of. Keep up the good work and hope to see a video/dyno soon.
P.S. Family first
P.S. Family first
![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
The following users liked this post:
UTAH TSX (06-11-2013)
The following users liked this post:
UTAH TSX (06-12-2013)
#203
Burning Brakes
Thread Starter
Down pipe jig is finished
Got a little fuel sysytem stuff to
Optimus I will take you're stuff to be coated on Thursday
Optimus I will take you're stuff to be coated on Thursday
The following users liked this post:
UTAH TSX (06-12-2013)
#205
Burning Brakes
Sweet.
Could CG price me out the Fuel pump and injectors I will need? I want to compare for I start dropping coin for the little pieces.
Could CG price me out the Fuel pump and injectors I will need? I want to compare for I start dropping coin for the little pieces.
#206
Burning Brakes
Thread Starter
Fuel system done
Installed this in 2 solid long 12-14 hour days, no brakes wrench in one hand sandwitch in the other style break, oh and a shit load of money for all the parts ouch!!!
Bosch 1000cc injectors, wont run out of fuel now
High volume billett fuel rail with marshall guage (got rid of that ugly stock rail)
Skunk2 Pro intake (knock off) but verry nice, ported and polished (still thinking about getting the Acura ZDX 70mm throttle body it's 200 bucks, can do that later (before tune)
Deatschworks dw65c 65 gallon per hour fuel pump, now has 55 PSI about 5 PSI more
Tucked wiring, got rid of that big plastic blob on the driver side of valve cover, ran wiring under intake manifold and under thermostat housing (not for the light harted took a whole day to do what a pian in my ass) but oh so worth it looks good clean clean
Hondata base map set for the big injectors and cranked up the cam advance to 50 deg.
Finished intercooler to throttle body pipe with IAT sensor in it (that bumper has been off at least 20 times to make otimus's and I's intercooler set up it's cracked now damit more money to spend like that mugen bumper a lot)
Bosch 1000cc injectors, wont run out of fuel now
High volume billett fuel rail with marshall guage (got rid of that ugly stock rail)
Skunk2 Pro intake (knock off) but verry nice, ported and polished (still thinking about getting the Acura ZDX 70mm throttle body it's 200 bucks, can do that later (before tune)
Deatschworks dw65c 65 gallon per hour fuel pump, now has 55 PSI about 5 PSI more
Tucked wiring, got rid of that big plastic blob on the driver side of valve cover, ran wiring under intake manifold and under thermostat housing (not for the light harted took a whole day to do what a pian in my ass) but oh so worth it looks good clean clean
Hondata base map set for the big injectors and cranked up the cam advance to 50 deg.
Finished intercooler to throttle body pipe with IAT sensor in it (that bumper has been off at least 20 times to make otimus's and I's intercooler set up it's cracked now damit more money to spend like that mugen bumper a lot)
Last edited by UTAH TSX; 06-15-2013 at 07:30 PM.
The following users liked this post:
holy frog (02-08-2016)
The following users liked this post:
UTAH TSX (06-15-2013)
#209
ROTAREDOM
I am amazed at how you were able to jam such a large setup in that engine bay and it still looks like you have space left over. Super clean look.
The following users liked this post:
UTAH TSX (06-16-2013)
#211
Burning Brakes
Thread Starter
The following users liked this post:
MC MiYoung3269 (06-17-2013)
#213
#214
Burning Brakes
Thread Starter
will probably do the a pillar cluster like this
ANY IDEAS INPUT OR PICS OF COOL GUAGE STUFF WELCOME HERE
#216
I thought about that it would be easy to run wiring but really hard to see under full boost with the torque steer trying to pull you off the road I wont want to be looking down there
will probably do the a pillar cluster like this
ANY IDEAS INPUT OR PICS OF COOL GUAGE STUFF WELCOME HERE
will probably do the a pillar cluster like this
ANY IDEAS INPUT OR PICS OF COOL GUAGE STUFF WELCOME HERE
#217
ROTAREDOM
Ok so I'm not sure this is even possible but if you could get a boost gauge in the middle of our rpm tach... That would be sooo boss. Right now that space isn't even being used. And our cluster is unique in the fact that our needles don't come from the center outwards so it would look just like the display on our speedometer.
#218
Goodbye.
Ok so I'm not sure this is even possible but if you could get a boost gauge in the middle of our rpm tach... That would be sooo boss. Right now that space isn't even being used. And our cluster is unique in the fact that our needles don't come from the center outwards so it would look just like the display on our speedometer.
#219
Burning Brakes
Thread Starter
Ok so I'm not sure this is even possible but if you could get a boost gauge in the middle of our rpm tach... That would be sooo boss. Right now that space isn't even being used. And our cluster is unique in the fact that our needles don't come from the center outwards so it would look just like the display on our speedometer.
#221
Burning Brakes
Thread Starter
#222
ROTAREDOM
Oh yeah... I forgot autos were lame. Sighhhh
The following users liked this post:
Snorlax (06-21-2013)
The following users liked this post:
UTAH TSX (06-19-2013)
#224
ROTAREDOM
#227
Burning Brakes
Thread Starter
The following users liked this post:
99blackhatch (08-29-2013)
#228
ROTAREDOM
Utah, just to make sure.. I bought my flashpro a while back, but no matter which direction I go weather SC or Turbo, Im gunna need the flashpro right? The tuners wont have that on hand right? I just wanna make sure I'm not wasting money by holding onto my flashpro.
#229
Burning Brakes
Thread Starter
It's a must have for SC or turbo
The following users liked this post:
ssjoeboe9 (06-22-2013)
#230
You could do something similar to the nsx pic if you had a navtool, and an obd2 reader on a smart phone. torque for android is popular, I've never used it but I believe it offers live data.
#231
Burning Brakes
Thread Starter
I need a cool looking gage pod of some kind to put it in
#232
Burning Brakes
Thread Starter
Intercooler pipe
Jigs are finished for intercooler
All jigs are done
I can now reproduce the the Borg Warner EFR 7670 turbo kit I made for optimus accord.
Wating for his titanium coating to get finished then I will ship it to him
We are both excited to get our cars put together and on the dyno
I will be putting my precision 5858 turbo set up on the on the second week of july and dyno tune around the 15th
Well I will be gone for a week to Honda training school in denver for a week, learnning about the new Honda Earth Dreams drive train advanced troubleshooting and drivability diagnossis, my brain will hurt it's hard to do the school thing at 48 years old, my brain is full already, no more room, I have to loose some memory.
All jigs are done
I can now reproduce the the Borg Warner EFR 7670 turbo kit I made for optimus accord.
Wating for his titanium coating to get finished then I will ship it to him
We are both excited to get our cars put together and on the dyno
I will be putting my precision 5858 turbo set up on the on the second week of july and dyno tune around the 15th
Well I will be gone for a week to Honda training school in denver for a week, learnning about the new Honda Earth Dreams drive train advanced troubleshooting and drivability diagnossis, my brain will hurt it's hard to do the school thing at 48 years old, my brain is full already, no more room, I have to loose some memory.
#233
Burning Brakes
Damn, that looks good.
Will mine have any hand scribbled notes to ensure that everything goes in correctly?
Are we deleting the MAF and running just the MAP correct?
I'll give you a call this week to talk about final payment. Also, how do you want to do the coating payment?
Will mine have any hand scribbled notes to ensure that everything goes in correctly?
Are we deleting the MAF and running just the MAP correct?
I'll give you a call this week to talk about final payment. Also, how do you want to do the coating payment?
The following users liked this post:
UTAH TSX (06-30-2013)
#234
Burning Brakes
Thread Starter
Damn, that looks good.
Will mine have any hand scribbled notes to ensure that everything goes in correctly?
Are we deleting the MAF and running just the MAP correct?
I'll give you a call this week to talk about final payment. Also, how do you want to do the coating payment?
Will mine have any hand scribbled notes to ensure that everything goes in correctly?
Are we deleting the MAF and running just the MAP correct?
I'll give you a call this week to talk about final payment. Also, how do you want to do the coating payment?
Will delete maf and use only MAP and IAT sensors.
Ruke will send you a bill via email for the coating it will look really good the titanium is nice will post pictures of the whole kit before I box it up and ship it.
#235
ROTAREDOM
I feel like a kid waiting for the next big blockbuster movie to come out! This is gunna be awesome!
The following users liked this post:
UTAH TSX (06-30-2013)
#239
Burning Brakes
Thread Starter
It's done ready to ship to optimusaccord
Dang that was a lot of work, really happy with the kit, will bolt right on no hacking car or wiring to install.
Ready to box up and send away, Optimus is going to be happy
Now I can get back to my car full time for a few weeks and get it done
Ready to box up and send away, Optimus is going to be happy
Now I can get back to my car full time for a few weeks and get it done
The following 11 users liked this post by UTAH TSX:
99blackhatch (08-29-2013),
caeavesrsx-s (07-08-2013),
gaTorSXtasy (07-02-2013),
icymichael (07-01-2013),
Kuchitan (01-18-2014),
and 6 others liked this post.
#240
Burning Brakes
Let me know when you get pricing, im interested~