Does anyone know a shop or individual who can sell and retrofit power folding mirrors? Thank you!

 

Username0

 

You will need to buy the folding motors and oem switch from lings Honda parts. It will cost around $300 to $400 shipped. You can swap all other parts over from your usdm mirrors. Wiring should be simple to a car electronics shop. No relay is needed.
Everything will work just like stock with the added folding option.

 

Is this a service that you do for people by any chance?

 

No. But I can help with questions you might have.

 

Would you be able to give me the exact part numbers that I should purchase? I went to that website and it was like reading a foreign language. I would be glad to give you some gift cards in exchange for your time.

 

Left motor- PFKL823593
Right motor- PFKL827567
Switch- 35190-TA0-003

The installer will have to swap out the non-motorize folding mechanisms and replace them with the power folding ones.
Each motor has a black and white wire. Adding power and ground to them will fold them one way and reversing the polarity will fold them the opposite way. These wires can be wired directly to the oem folding switch. The oem switch will have three extra pins compared to the usdm switch. One pin sits alone and the other two sit together. You wire the motors directly to the pair of pins on the switch. The third pin isn't needed.
No other wiring or relays needed.

 

 

 

hey you guys know where I can just buy the plastic part? the part that covers the signal lights. broke it with golf club on accident check pictures. thanks

 

That clear plastic is the signal light. It's all one piece.

 

hello, i know this is old but only one i could find.
i tried this wirring and im able to either folding the mirrors in, or unfold, but it would not do both with the jdm switch.

Wiring just like that, it will fold the mirrors in and thats it. I have to swap out pin 7 and pin 8, and the mirrors would open up.

What am i missing.