Pull motor leaving trans in?
#6
Senior Moderator
for the few extra bolts pull the trans with the motor out the top. It will be much easier to bolt up and align out of the car.
Trending Topics
#10
Senior Moderator
Yes, and the hood doesnt have to come off. Unhook the washer fluid hose fromthe attachment on the passenger side strut tower, take off the 2 hood struts from the hood, unscrew the drivers side hood strut pin and screw it in the hole closer to the hinge and reattach the hood strut to it to hold the hood open. The hood will stay vertical.
#11
bringin lead
Yes, and the hood doesnt have to come off. Unhook the washer fluid hose fromthe attachment on the passenger side strut tower, take off the 2 hood struts from the hood, unscrew the drivers side hood strut pin and screw it in the hole closer to the hinge and reattach the hood strut to it to hold the hood open. The hood will stay vertical.
#14
wham bam thank you ma'am
iTrader: (8)
helms manual or alldata (u have to pay for alldata). this will help u also. waiting for it to load sucks
http://home.comcast.net/~amberlani01/ServiceManual.pdf
http://home.comcast.net/~amberlani01/ServiceManual.pdf
Thread
Thread Starter
Forum
Replies
Last Post
IBankMouse
1G TSX (2004-2008)
8
06-13-2020 12:53 PM
SidhuSaaB
3G TL Problems & Fixes
18
05-30-2020 12:40 AM
STL TL-S
3G TL Problems & Fixes
9
09-23-2015 08:52 PM