Need opinons - lip kit purchase cost issue

Thread Tools
 
Search this Thread
 
Old 03-01-2010 | 03:55 PM
  #1  
TheMegalodon's Avatar
Thread Starter
I'm a thrill seeker in my
 
Joined: May 2008
Posts: 907
Likes: 18
From: Edmonton, AB
Unhappy Need opinons - lip kit purchase cost issue

Hey guys I'm hoping to receive a few of your opinions to help me in my decision to determine whether buying the oem lip kit is worth it.

First of all I'm in Canada. Problem one right there because its more expensive.
Problem two: shipping to Canada on over sized items is horrible.

Okay, now I would really like to finish off the look of my car with the kit. What I'm trying to decide is if its worth it for ME.

My local dealership can source the complete kit but the front is in NBP. Canadian wholesale on it is 1900 or so I was told and the cost of repainting the front. Original price offered to me was 2250!

I've spoken with a guy from Bellevue Acura in Washington state and they will sell me the kit in my color for 900 USD. Unfortunately shipping could be upwards of 500 bucks plus duties, tax (5%) and conversion (6% extra right now). Once all is said and done the kit shipped to my door would be easily 1700-1800 Canadian.

With that said I have to figure out whether this is a good use of my money. I know many say the kit is a must have but would you pay that much? I plan to keep my car for the next few years so I would enjoy the kit for a while.

I'm really unsure of what to do. I would really appreciate any and all opinions.
Old 03-01-2010 | 05:53 PM
  #2  
03tlCHARCOL's Avatar
WIP-Work in Progress
iTrader: (3)
 
Joined: Jan 2006
Posts: 706
Likes: 13
From: Seattle
1.Calculate the cost of gas from Edmonton to Washington State and also if you want to put that much mileage on your car. If it's cheaper than paying for the shipping/duties that might be an option.

2.You could also do the same with a dealership that is closer to your location. Or maybe you can could ask them to ship it to a US dealership close to Canada and drive across the border to get it installed.

3.Junkyards?

I def think it changes the look of the car and in my opininion is needed, but not at the cost that you have to pay for it though.

Continue to shop around good luck.
Old 03-01-2010 | 06:11 PM
  #3  
Spoilaz's Avatar
Instructor
 
Joined: Aug 2009
Posts: 133
Likes: 1
From: NY
I know its like a 13-14 hr drive (@800 mi) each way but if money is the issue you should just drive to the dealer in WA and put it on yourself and drive back....$900 + $221(gas 4 tanks 17 gal @$3.25) + $100(motel & food)==$1221 This way you will save 5-600 bucks if you are that serious about getting this kit. Nice weekend trip. I drive from NY to NC,GA,FL several times a year so if I was going to save that much money for something I really wanted I would have no problem taking that drive.
Old 03-01-2010 | 06:36 PM
  #4  
TheMegalodon's Avatar
Thread Starter
I'm a thrill seeker in my
 
Joined: May 2008
Posts: 907
Likes: 18
From: Edmonton, AB
I would certainly be open to driving down there and have thought about it. The drive is fantastic...in the summer, not so much winter...and it would save me money. Only problem is I'm in university and work on weekends. Makes it difficult until I wait until the semester is over.

Joe from Acura of Bellevue is looking into shipping for me. Awesome guy, real nice and easy to talk with. I'm anxious to see what he comes up with for me because he said he'll do his best to get me a reasonable deal.

03tlcharcol you're in Seattle right? If I did drive down would you want to help me install the kit there?'

I'd like to keep my options open and if I can, pull the trigger on buying the kit before my window closes. It's becoming increasingly difficult to find one.
Old 03-01-2010 | 08:21 PM
  #5  
delheat's Avatar
Intermediate
 
Joined: Feb 2010
Posts: 48
Likes: 0
anyone know of where to get one on the east coast ? i contacted del acura and they no longer carry it . Who does except bellevue in WA ? Thanks in advance !
Old 03-01-2010 | 08:55 PM
  #6  
JCharged's Avatar
Safety Car
iTrader: (5)
 
Joined: May 2006
Posts: 4,439
Likes: 219
From: NOVA 703
Holy smokes. If you want it, you go get it. Yes, I would kill for the OEM lip kit myself.
Old 03-01-2010 | 09:09 PM
  #7  
03tlCHARCOL's Avatar
WIP-Work in Progress
iTrader: (3)
 
Joined: Jan 2006
Posts: 706
Likes: 13
From: Seattle
Originally Posted by TheMegalodon
I would certainly be open to driving down there and have thought about it. The drive is fantastic...in the summer, not so much winter...and it would save me money. Only problem is I'm in university and work on weekends. Makes it difficult until I wait until the semester is over.

Joe from Acura of Bellevue is looking into shipping for me. Awesome guy, real nice and easy to talk with. I'm anxious to see what he comes up with for me because he said he'll do his best to get me a reasonable deal.

03tlcharcol you're in Seattle right? If I did drive down would you want to help me install the kit there?'

I'd like to keep my options open and if I can, pull the trigger on buying the kit before my window closes. It's becoming increasingly difficult to find one.
Have you asked Acura of Bellevue if they're open to shipping to a dealer in Idaho or Montana? That might be a closer drive than Washington?

I put on the rear and sides myself, but I had the dealership do the front b/c if I remember correctly you needed to drill holes and I didn't trust I could do it without messing something up. So I wouldn't mind doing helping with those ones. I also would probably recommend that you put the front lip back at home, since the drive home you might take some rock chips and you wouldn't want to ruin it. Or you could just blue tape the entire front end

Originally Posted by delheat
anyone know of where to get one on the east coast ? i contacted del acura and they no longer carry it . Who does except bellevue in WA ? Thanks in advance !

I actually got my kit from Ray Laks of Acura in Buffalo, they shipped it to my door and painted for like $900 irrc.
Old 03-01-2010 | 09:13 PM
  #8  
myTLgoesBWAAH's Avatar
Banned
 
Joined: Aug 2009
Posts: 151
Likes: 0
From: bradford ontario
i bought the oem lip kit but all bought seperately it ran me max 500 dollars for the oem front oem 2 side skirts and oem rear! i got a steal of a deal!!
Old 03-01-2010 | 09:14 PM
  #9  
myTLgoesBWAAH's Avatar
Banned
 
Joined: Aug 2009
Posts: 151
Likes: 0
From: bradford ontario
and im in canada!
Old 03-01-2010 | 10:42 PM
  #10  
TheMegalodon's Avatar
Thread Starter
I'm a thrill seeker in my
 
Joined: May 2008
Posts: 907
Likes: 18
From: Edmonton, AB
Originally Posted by myTLgoesBWAAH
i bought the oem lip kit but all bought seperately it ran me max 500 dollars for the oem front oem 2 side skirts and oem rear! i got a steal of a deal!!
You want a medal? We got plenty of golds to go around. I'm looking for opinions on my issue, not anyone to brag about their deal.

03tl thanks for you posts. I'll be told tomorrow what shipping will be and if its too much maybe I can have it shipped to Montana.
Old 03-02-2010 | 01:04 PM
  #11  
cashstar's Avatar
Intermediate
 
Joined: Sep 2008
Posts: 30
Likes: 0
From: Toronto
I Paid roughly about 1400 Cad for my kit last year had to piece it together but really I think it was worth it!

If your going to keep the car for awhile I say go for it you won’t regret it and as some have mentioned check out junk yards, craigslist,kijiji.
Old 03-02-2010 | 06:09 PM
  #12  
TheMegalodon's Avatar
Thread Starter
I'm a thrill seeker in my
 
Joined: May 2008
Posts: 907
Likes: 18
From: Edmonton, AB
Cheers cashstar, that sounds like a reasonable price for us Canadians to get the kit. If I can get it for around 1500 to my door I'll pull the damn trigger before it's too late.
Old 04-16-2010 | 05:25 PM
  #13  
jocson's Avatar
5th Gear
 
Joined: Mar 2010
Posts: 5
Likes: 0
Did you end up picking up the kit? How was working with Joe from Acura of Bellevue?

Newbie on the board and the lip kit (along with misc. OEM fixes) are at the top of my repair list, so I'm currently trying to find a friendly and helpful dealership/parts guy who can assist me in my searches.
Old 04-16-2010 | 05:54 PM
  #14  
tmdhatch's Avatar
6th Gear
 
Joined: Apr 2010
Posts: 6
Likes: 0
any1 kno where i can get a front lip in NY?
Old 04-16-2010 | 06:07 PM
  #15  
Walfunk's Avatar
Racer
 
Joined: Sep 2009
Posts: 446
Likes: 34
Any one know where I can get a full lip kit in Delaware, PA or Maryland?
Old 04-17-2010 | 06:40 PM
  #16  
'03TL-S's Avatar
Drifting
iTrader: (10)
 
Joined: Oct 2006
Posts: 2,279
Likes: 0
From: Texas
Try going to the dealer and see if they have any, or can they order any for you.
Old 04-17-2010 | 09:26 PM
  #17  
Rockstar21's Avatar
The Dumb One
iTrader: (1)
 
Joined: Aug 2008
Posts: 11,810
Likes: 373
From: Baton Rouge, LA
people speak of the OEM kit as if its un-attainable... save some money, and buy that bad boy... no need to put it up on a pedestal. lol
Old 04-17-2010 | 11:22 PM
  #18  
TLin401's Avatar
'13 Hyundai Sonata
 
Joined: Jul 2007
Posts: 5,927
Likes: 99
From: RI (401)
Did you get it?
Old 04-17-2010 | 11:35 PM
  #19  
03tLsNBP's Avatar
MechEng
iTrader: (9)
 
Joined: Jan 2010
Posts: 5,910
Likes: 486
From: Long Island, NY
Originally Posted by Rockstar21
people speak of the OEM kit as if its un-attainable... save some money, and buy that bad boy... no need to put it up on a pedestal. lol
seriously couldnt have said it any better. there are several sites that sell legit OEM kits for about US$950 to your door painted and ready to go on. wait and save up for it. or just roll around without it. i mean our cars dont look terrible without it. plus if you dont spend money on a kit, you will have money for a new tranny (or warranty) which you will inevitably need to buy eventually.
Old 04-18-2010 | 12:52 AM
  #20  
Gfaze's Avatar
S E L L
 
Joined: May 2007
Posts: 12,767
Likes: 51
From: Modesto, CA
They are becoming harder to find because they have been discontinued. No pedestal, just a little desperation. As far as those legit OEM kits you speak of, I'd bet most if not all of them are a fiberglass replica, which is much more fragile than the actual OE ones. One accidental bump to a curb and *CRACK*!! My front lip has taken several bumps and other then a few scrapes, it's fully intact.
Old 04-18-2010 | 01:53 AM
  #21  
kriz2fer's Avatar
Instructor
 
Joined: Mar 2010
Posts: 177
Likes: 1
From: salem
If you look on ebay you could get a lip kit for about 350.00, but its not oem acura but its the oem spec looks the same i would not pay over 500 bucks for the oem kit not worth it imo but im a cheap ass...
Old 04-18-2010 | 03:14 AM
  #22  
TheMegalodon's Avatar
Thread Starter
I'm a thrill seeker in my
 
Joined: May 2008
Posts: 907
Likes: 18
From: Edmonton, AB
Originally Posted by TLin401
Did you get it?
Wouldn't you like to know

Tune in next week. Same Bat-time, same Bat-channel.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
cycdaniel
1G TSX Performance Parts & Modifications
8
12-17-2019 10:58 AM
fuct
3G TL (2004-2008)
79
05-14-2017 09:43 PM
HOWELLiNC
Car Parts for Sale
8
10-19-2015 03:26 PM
Mr.Tea
1/2G MDX (2001-2013)
26
10-09-2015 04:27 PM
IIDXholic
Car Parts for Sale
23
10-08-2015 07:53 AM



Quick Reply: Need opinons - lip kit purchase cost issue



All times are GMT -5. The time now is 08:16 AM.