I need a J-Pipe for an '03 CL-S 6MT swap into a '96 Integra.

What do you guys recommend I get that will bolt onto the stock manifolds?

 

u cant just buy the j pipe. u need to get teh headers with it. u can get ebay ones for just over $100 or dc sports for around $400 or comptech for just over $1000.

 

i think richiev6 makes jpipes, shoot him a PM

 

btw, how is the a3 swap going? how are you getting passed the fly by wire?

 

hes got an a3 i thought a2/1. unless he got diff heads on. but rv6 makes a good, cheap priced j pipe

 

his sig says A3

 

i didnt read it. but then this should be in the 3rd gen tl side

 

No it's an A2. I abandoned the A3 it is now a desk paper weight.

I thought I could keep my stock manifolds to cut down on noise and just run a j pipe off them. I thought most of he j pipes were factory replicas and it would bolt on.

 

never heard of anyone bolting up a j pipe to the stock headers. ppl install it all

 

if you want to cut down on noise put a long resonator on the exhaust

you should change your sig so no one else gets confused