just go get a old cell phone or something similar take it apart desolder and solder again. turn it back on. if it works you did a good job. practice makes perfect. if you doubt yourself get somebody to help you out.


and lets see them pics.

 

This is the stuff I use..

http://www.homedepot.ca/webapp/wcs/s...k=P_PartNumber

 

PM me and we can discuss.

Well I had Hondanutty drop out for the fall....hope you get well, and hopefully see you next spring. Since that job fell through, I might be able to get my DIY up a little sooner. Keep an eye out!

 

dont worry ontario i check this page everyday!!!

 

Sick!

So sick!

 

you should build pre made harnesses make this a plug and play make some money while your at it

 

Here is the Cluster that Ontario did for me a few months back...been too lazy to post






And just for Fun

 

wow.

 

Wow indeed.

Out of curiousity are there any pics of this mod done on the instrument cluster with the white face? I think all the ones I've seen thus far are on the one with the black face.

 

The pics that I posted were from my car...2003 Type-S A-Spec. It has the silver faced gauges.

 

Not knocking it but fuel gauge appears to have hot spot & temp. gauge looks dimmer compared to other gauges. Looks cool.

 

Ahh, didn't notice that. Thnx.

You wouldn't happen to have any daytime pics, would ya? Or even evening pics before the sun goes down?

 

I'll see if I can take a few pics for ya'

 

great job playa...Ive got patience like an amsterdamn whore. Bring it on when you get the time man. Great job again. Very impressed

 

Thank you very much...All the work was done by OntarioTL...Amazing Job!

 

I'm totally stoked for this DIY!

 

Its the camera...its a little more sensitive than our own eyes. There is no hotspot when you see it with the naked eye. I wouldn't have let A-spec leave if there was one like that. Although I will admit type-s gauges are a little more difficult to deal with.

A-Spec, nice pics...I forgot about you posting some. Contact me when you want the rest done, and to look at your cluster again.

 

ont. are there any DIY's that you have posted in the past?

 

I was working out a prototype a while ago, but with the cost associated with it, it just wasnt feasable. So I went back to the old install and tried to improve it as much as I can....even including an voltage regulator to control spikes. Now its just to sit down and gather the images of the install and create a DIY. Along with a computer crash, my nieces wedding, my roomie moving out....things just keep getting in the way.

I'm around from time to time to answer questions though, as best I can if you plan to try it.

 

I haven't posted any DIY's on here. I did give my ideas and DIY to Ledautomotive a long time ago. Now I do it a completely different way for installs. It's not plug and play with my install anymore.

 

I appreciate it Ontario. I'll give you a shout for sure to let you know when I'm able to come up for the rest of the Mods.

 

still waiting ontariotl =D

 

ill still here and still waiting. cant wait

 

I would agree with Ontario. This was a hard conversion on the Type-S...I"m sure it will take quite some time for the DIY to be completed

 

OntarioTL, do you have an e-mail address I can reach you at? Thanks.

 

Can you PM instead?

 

Not yet, haha! I'll continue to build my post count, so I'll be able to. Got a couple of ?'s for ya. I'll shoot you one once I get my privlages.

 

[quote=OntarioTL;9219074]

quote]

Outside temp, SIXTEEN DEGREES??? Good gracious man, I think I would have goosebumps on my balls, LOL!

Guess Im just used to hot ass VA.

 

Remember that's 16 degrees celsius, not fahrenheit

16C is a pretty decent temperature... just around the perfect mark for me where it's not too warm and not too cold.

 

......patiently waits for the DIY

 

ontario, lmk if u need any help with the diy. i'd like to do this during winter break... lol

 

Yeah lol, I forgot about that. When I saw the km/h, I should have known better.

 

No doubt.

Gauge cluster in hand.

Think you could make some $$$ on the side putting these gauge kits together.

Time consuming though.

 

Ontario, are your leds dimmable? I am ready to jump into a mod like this but am very far away. Glad to get some pointers and parts. Did some LED modding on a different application but would love to hit up my backlights . . . not to mention my back lights, lol.

 

the leds ARE dimmable.. but once you have it you always wanna keep them on the brightest lol

 

Bump for my man Ontariooooooo!

 

 

i can wait for ever for this DIY

 

<<<<<< I might try this when its posted. Dope shit!

 

I don't know if I can. I thnk our guage cluster is losing brightness/output/clarity quickly.