hey everyone, wanted to ask for a DYI on the install for blitzsafe for the nano. anyone have their DYIs for this? abunchofcars.com is down, or is currently asking a pw and i cant access anything. and the DYI sticky doesnt have this install. Thanks everyone!

 

You may find this thread useful:
https://acurazine.com/forums/car-talk-5/2-buick-gns-picking-viper-gts-video-132141/

Basically,

1) Take off the wood trim on passenger side (it snaps out)
2) Take off the knee panel on passenger side (held in with a few screws)
3) Reach in and try to plug the adapter behind the stock stereo. U may have to feel around a bit, its in the bottom right corner.

Btw, it's DIY, not DYI

 

I did the same thing....saved a lot of time by just reaching behind and plugging the wire into the AUX port, didn't have to take the radio out. I was a bitch to manuver that wire aroud with such a small space to work with.

 

What he said...


It was a bitch to get the cable in place, but thats exactly how I did mine.

Good luck