Is replacing the arm rest my solution?

Old Apr 5, 2017 | 04:47 PM
  #1  
maximaorg's Avatar
Thread Starter
Intermediate
 
Joined: Mar 2017
Posts: 36
Likes: 1
Is replacing the arm rest my solution?

I bought the car with the armrest detached because the previous owner said it wont clip down. I screwed in the armrest, and as expected, it was stuck open. Is replacing the arm rest my solution?-photo892.jpg
Reply
Old Apr 10, 2017 | 10:46 AM
  #2  
jjojo2004's Avatar
9th Gear
 
Joined: Oct 2016
Posts: 9
Likes: 3
From: Florida, USA
I think replacing the lid is your best option. Scour ebay for a decent one with a good condition latch down clip. I need a new one becuase all the foam decomposed and its now hard as a nail to my elbow. I suppose they are all bad by now..........
Reply
Old Apr 10, 2017 | 10:49 AM
  #3  
thoiboi's Avatar
Senior Moderator
15 Year Member
Community Builder
Loved
Community Favorite
 
Joined: Apr 2010
Posts: 48,302
Likes: 9,173
From: SoCal, CA
Originally Posted by maximaorg
I bought the car with the armrest detached because the previous owner said it wont clip down. I screwed in the armrest, and as expected, it was stuck open. Attachment 42545
junkyard!


Originally Posted by jjojo2004
I think replacing the lid is your best option. Scour ebay for a decent one with a good condition latch down clip. I need a new one becuase all the foam decomposed and its now hard as a nail to my elbow. I suppose they are all bad by now..........
take off the leather and add some foam to it! You can re-purpose this DIY: https://acurazine.com/forums/3g-tl-p...-640667/page2/
Reply
Old Apr 10, 2017 | 08:51 PM
  #4  
maximaorg's Avatar
Thread Starter
Intermediate
 
Joined: Mar 2017
Posts: 36
Likes: 1
I didn't even know there was supposed to be foam under there! It feels like I'm resting my elbow on a piece of wood. I'll scour a junkyard for one so I can see how it's supposed to clip down. The ones on ebay look like they don't even have clips.
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 09:30 AM.