Versus kit modified front...Updated, real life pics! (pg1)
11-28-2003, 05:32 PM
#1
Versus kit modified front...
so the car is in the shop right now and the kit is being installed as below in the after picture. I saw it after they cut it and it looks so sweet, this si how it should have looked like from versus. it's also even with the side skirts too. If you look at some of the installed pics of the kit, the front is closerr to the ground than the sides which is ugly and obviously gonna scrape if your dropped at all. I get the car back on monday and will def post picturs...
By the way, the total for the cutting and the grille modification and painting of the kit with installation was close to $900 in NY.
By the way, the total for the cutting and the grille modification and painting of the kit with installation was close to $900 in NY.
Trending Topics
11-28-2003, 08:34 PM
#9
I'm sure it will look like this, if not better in real life, my only concern was that the skirt would flap in the wind at high speed, but after they cut it and we mocked it on the car, it was very stout and fit perfectly. not too much play and that was without any mounting, imaginw when its done and has the tape and screws in the fender walls. I am so psyched, and I painted the splitters just in case this didn't work.
11-29-2003, 08:08 AM
#12
Originally posted by 03cls5a
Rondog....
What's the offset on your wheels, front and back?
Also how did you make the grill and is the bottom bumper also customized?
Rondog....
What's the offset on your wheels, front and back?
Also how did you make the grill and is the bottom bumper also customized?
CLASSY, we can hook up with a few more heads and have a mini meet at burger King like last time.
11-29-2003, 02:09 PM
#16
Originally posted by Titand19
Nice rondog. Good to see that someone is doing something about that ugly front end.
Nice rondog. Good to see that someone is doing something about that ugly front end.
11-29-2003, 06:00 PM
#17
Full-Time IDIoT---DoH!!!
Join Date: Jan 2002
Location: DUMB ISLAND
Age: 42
Posts: 4,654
Likes: 0
Received 16 Likes
on
10 Posts
nice job rondog! good luck w/this project
i was also planning to do this if i got a cl and a versus kit i.e. modify the front end
again good luck w/the wheel company and w/this project
i was also planning to do this if i got a cl and a versus kit i.e. modify the front end
again good luck w/the wheel company and w/this project
12-01-2003, 02:48 PM
#18
"hey...wanna f^&k"
Join Date: Mar 2003
Location: NORTHEAST FLORIDA
Age: 40
Posts: 1,343
Likes: 0
Received 0 Likes
on
0 Posts
what do yall think.
i ordered a full, carbon fiber splitter in replacement of the removed lip. i have already fitted one and it looks really hot. i had to order one because i needed one that would go from side to side.
i ordered a full, carbon fiber splitter in replacement of the removed lip. i have already fitted one and it looks really hot. i had to order one because i needed one that would go from side to side.
12-01-2003, 05:22 PM
#24
here, it was cold, but Bigman kept me company. some are blurry cuz I didn't even sort them out, but you get the idea,,,
here's a sample, the link below has all the pics:
Click here for the page with all of the pics...
here's a sample, the link below has all the pics:
Click here for the page with all of the pics...
12-01-2003, 05:26 PM
#25
Senior Moderator
that looks really good. 
the ps'd pics didn't do it justice. nice work.
the ps'd pics didn't do it justice. nice work.
....THAT LOOKS FUCKIN' AWESOME!!!
12-01-2003, 05:30 PM
#27
Senior Moderator
12-01-2003, 05:31 PM
#28
thanks guys, i still hve to adjust the HKS mufflers and redo the grille, It got a little bent but no biggie. The drop seems to have raised an inch in the back, I don't know why, but it used to be 2 fingers, and now its three, weird. and finally the door sills have a minor rub where the doors shur, but it's nothing big, the body shop said to let it wear out and they'll buff it and repaint it if need be. I alrready got mad compliments on the street and the car has a more muscular stance. i love it...
12-01-2003, 06:39 PM
#35
Homeless
Join Date: Feb 2003
Location: Northern DEL-A-Where?
Age: 51
Posts: 9,210
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by RR32CLS
what do yall think.
i ordered a full, carbon fiber splitter in replacement of the removed lip. i have already fitted one and it looks really hot. i had to order one because i needed one that would go from side to side.
what do yall think.
i ordered a full, carbon fiber splitter in replacement of the removed lip. i have already fitted one and it looks really hot. i had to order one because i needed one that would go from side to side.
An older guy in Ohio bought a kit off ebay from me & did something similar to his...that's what gave me the idea. I should've kept a kit to modify now that I've seen Rondog's...
It came out just like the pic.
12-01-2003, 07:15 PM
#37
Senior Moderator
you need 19's for the front. like you did in the chop. 
