Time for Brakes
#1
Safety Car
Thread Starter
Time for Brakes
Okay. I admit I need brakes. Before you guys start recommending big brake kits and what-not, here's what I am looking for:
(1) Cross-drilled (and slotted, if possible) factory-size replacement front rotors
(2) Good quality brake pads to fit factory calipers
(3) Low Price![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
Any suggestions????
(1) Cross-drilled (and slotted, if possible) factory-size replacement front rotors
(2) Good quality brake pads to fit factory calipers
(3) Low Price
![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
Any suggestions????
#2
Got a Job!
iTrader: (1)
Join Date: Aug 2003
Location: NYC (NoLita)
Age: 38
Posts: 4,343
Received 0 Likes
on
0 Posts
Whassup Ram...
1) It seems as though that alot of people end up going with the Rotora Slotted F/R rotors. You can either pm blxmjx or DeansblackCLS...I heard they've got pretty good deals on the rotors. You can also check out www.c-c-c.net or http://www.autocarparts.com/ .
2) Axiss Ultimate's....they provide a great bite, but tend to squeal some and have quite a bit of brake dust. EBC greenstuff is also an option, but i've gotten mixed reviews from those...
3) It should come to like...$450ish? Hope this helps.
`John
1) It seems as though that alot of people end up going with the Rotora Slotted F/R rotors. You can either pm blxmjx or DeansblackCLS...I heard they've got pretty good deals on the rotors. You can also check out www.c-c-c.net or http://www.autocarparts.com/ .
2) Axiss Ultimate's....they provide a great bite, but tend to squeal some and have quite a bit of brake dust. EBC greenstuff is also an option, but i've gotten mixed reviews from those...
3) It should come to like...$450ish? Hope this helps.
`John
#4
Parting out 02 Type S :(
Join Date: Mar 2001
Location: LA,CA
Age: 74
Posts: 1,299
Likes: 0
Received 0 Likes
on
0 Posts
I would say rotora's also, and i think the axis ultimates are cheap and good. The only thing i can push you away from is Hawk pads. I and 2 other people i know have had them. They are great at first, then they are really loud and the smoothness goes away, plus they fade really easily (HPS pads and their plus ones).
Also, you might want to get some pads for the rear. There isnt much braking back there but you will benefit from a better pad. The rotors in the rear can easily handle most abuse.
Also, you might want to get some pads for the rear. There isnt much braking back there but you will benefit from a better pad. The rotors in the rear can easily handle most abuse.
#7
Three Wheelin'
Join Date: Oct 2000
Location: Coppell, Texas, USA
Posts: 1,514
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Dem1K
hey power...when upgrading the brakes, do you think upgrading the rear ROTORS is important? Or can you just do pads in the rear, and upgrade the front rotors & pads?
I did the front rotora's with axis ultimate on all four corners, kept the rear rotors and they had so little wear I didn't even put them on the lathe,, it has been almost 20 k miles and they still stop great,,, only issue is dust but the perfomance outways the dust issue,, for me anyway...
![Dunno](https://acurazine.com/forums/images/smilies/dunno.gif)
Trending Topics
#10
how about a Legend caliper swap. I'm pretty sure you would benefit from the additional piston and if I remember correctly Legend brakes were suppose to be very similar to NSX ones.
#11
-S namyaC-
Join Date: Sep 2003
Location: TN
Age: 39
Posts: 4,099
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by power3dfx
I would say rotora's also, and i think the axis ultimates are cheap and good. The only thing i can push you away from is Hawk pads. I and 2 other people i know have had them. They are great at first, then they are really loud and the smoothness goes away, plus they fade really easily (HPS pads and their plus ones).
Also, you might want to get some pads for the rear. There isnt much braking back there but you will benefit from a better pad. The rotors in the rear can easily handle most abuse.
Also, you might want to get some pads for the rear. There isnt much braking back there but you will benefit from a better pad. The rotors in the rear can easily handle most abuse.
Only problem I had was the stupid shim plates kept slipping down but they said if it happened again, they'd send me a new set.
EBC sucks - horrible experience with them. One of the worst companies I ever delt with.
#12
Parting out 02 Type S :(
Join Date: Mar 2001
Location: LA,CA
Age: 74
Posts: 1,299
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by proaudio22
I love my Hawks. I haven't noticed much fade at all, and I tried to put the hurt on them a few times (balls out stop from 110, etc then use them again and again - no probs). Might be the batch?
Only problem I had was the stupid shim plates kept slipping down but they said if it happened again, they'd send me a new set.
EBC sucks - horrible experience with them. One of the worst companies I ever delt with.
Only problem I had was the stupid shim plates kept slipping down but they said if it happened again, they'd send me a new set.
EBC sucks - horrible experience with them. One of the worst companies I ever delt with.
As for the rear rotors, they are fine. Unless your autoxing i dont think you can warp them. Just throw some cheap and high temp. resisting aftermarket pads and they will be ok. I have hawks in the rear and since they do not get much braking, they work fine.
Proaudio, how long have you had them on for? If you dont abuse them for long periods of time, only a couple stops in a min. or so, they could make it out alive.
But believe me, i have seen these things fade like you wouldnt believe. and only after 3 hard stops!
#13
Parting out 02 Type S :(
Join Date: Mar 2001
Location: LA,CA
Age: 74
Posts: 1,299
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ThinJim
On top of those upgrades, I believe the single most benificial upgrade would be stainless brake lines. your stopping power is inhanced 6fold. just my ![2 Cents](https://acurazine.com/forums/images/smilies/2cents.gif)
![2 Cents](https://acurazine.com/forums/images/smilies/2cents.gif)
The only reason they might help is a better feel to the brake pedal. I personally say that with the stock calipers and stock size rotors and pads, the benefits of the SS lines wouldnt be realized. Also, let me remind you that the SS lines do not run all the way around (at least from my experience). It is only a few feet of it and then its the stock lines all the way to the brake master cylinder. This is especially a waste of money in the rear.
#14
Parting out 02 Type S :(
Join Date: Mar 2001
Location: LA,CA
Age: 74
Posts: 1,299
Likes: 0
Received 0 Likes
on
0 Posts
One last thing that is important to mention. One of my friends got the hp plus pads from hawk, the race compound ones. They take about 5 mins. in the morning to warm them up, and they hardly stop within the first 5 minutes of warm-up, very unsafe and unnecessary for the street! Make sure you get something that is not specifically a race compound.
#16
-S namyaC-
Join Date: Sep 2003
Location: TN
Age: 39
Posts: 4,099
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by power3dfx
Though i only got these from when i did the bbk, i highly doubt they help much at all. I think that the brake fluid we are running will not overheat before the pads/rotors do. So when your rotors begin to warp and your pads begin to fade, the brake lines would still be OK.
The only reason they might help is a better feel to the brake pedal. I personally say that with the stock calipers and stock size rotors and pads, the benefits of the SS lines wouldnt be realized. Also, let me remind you that the SS lines do not run all the way around (at least from my experience). It is only a few feet of it and then its the stock lines all the way to the brake master cylinder. This is especially a waste of money in the rear.
The only reason they might help is a better feel to the brake pedal. I personally say that with the stock calipers and stock size rotors and pads, the benefits of the SS lines wouldnt be realized. Also, let me remind you that the SS lines do not run all the way around (at least from my experience). It is only a few feet of it and then its the stock lines all the way to the brake master cylinder. This is especially a waste of money in the rear.
#17
Spectacular Aroma About
Join Date: May 2003
Location: Ohio
Age: 56
Posts: 1,364
Likes: 0
Received 0 Likes
on
0 Posts
I used Powerslot rotors and AEM pads on my old Prelude and was very impressed. The AEM pads are made by Nissin the OEM manufacturer. They were very quiet and totally dust free but were noticably grippier than stock.
#18
-S namyaC-
Join Date: Sep 2003
Location: TN
Age: 39
Posts: 4,099
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by power3dfx
your experience might be different for some unknown reason, but i have personally seen these HPS pads on two mustangs besides my car. One of them was an easy driver, and he liked them for the first 2 months. Then they got all loud and annoying, i think he went back to stock pads.
As for the rear rotors, they are fine. Unless your autoxing i dont think you can warp them. Just throw some cheap and high temp. resisting aftermarket pads and they will be ok. I have hawks in the rear and since they do not get much braking, they work fine.
Proaudio, how long have you had them on for? If you dont abuse them for long periods of time, only a couple stops in a min. or so, they could make it out alive.
But believe me, i have seen these things fade like you wouldnt believe. and only after 3 hard stops!
As for the rear rotors, they are fine. Unless your autoxing i dont think you can warp them. Just throw some cheap and high temp. resisting aftermarket pads and they will be ok. I have hawks in the rear and since they do not get much braking, they work fine.
Proaudio, how long have you had them on for? If you dont abuse them for long periods of time, only a couple stops in a min. or so, they could make it out alive.
But believe me, i have seen these things fade like you wouldnt believe. and only after 3 hard stops!
![Big Grin](https://acurazine.com/forums/images/smilies/biggrin.gif)
They do squeak, if that's what you mean. I've always had performance pads tho, and that's just what they do. I learned to deal with it a long time ago. They aren't nearly as bad as some I had.
#21
Lead Footed
Originally Posted by Scrib
Wonder if one of our parts folks would look in to a group buy on them.
![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
Ruf
#22
Banned
Join Date: Sep 2003
Location: Northern NJ
Age: 42
Posts: 1,054
Likes: 0
Received 0 Likes
on
0 Posts
For a car with your high HP go with the Rotora BBK, you can prob get it for about 900 new.......itll only prob be anohter 500$ to get it....since your gettin new pads and discs
#25
Parting out 02 Type S :(
Join Date: Mar 2001
Location: LA,CA
Age: 74
Posts: 1,299
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by fuzzy02CLS
I warped my rear rotors ![Big Grin](https://acurazine.com/forums/images/smilies/biggrin.gif)
![Big Grin](https://acurazine.com/forums/images/smilies/biggrin.gif)
#27
Suzuka Master
Join Date: Sep 2000
Location: Woodstock, GA
Age: 53
Posts: 9,431
Likes: 0
Received 0 Likes
on
0 Posts
Want to fabricate a kit to use the stock diameter but with Wilwood four or six piston calipers??
I still have the design details from what I was about to start during the summer. I figured I could have put it together for about $600 which would include slotted (and/or cross drilled) rotors, pads, Wilwood four piston calipers and caliper bracket.
I still have the design details from what I was about to start during the summer. I figured I could have put it together for about $600 which would include slotted (and/or cross drilled) rotors, pads, Wilwood four piston calipers and caliper bracket.
#29
Drifting
Originally Posted by allmotor_2000
Thanks - I want to keep the factory diameter.
Why?
I have the slotted rotoras and axxis ultimates pads, and the car stops awesome with no fade, but the dust is unbelievable.
#30
Senior Moderator
rotora rotors and hands down the EBC Green Stuff pads. i have had most of the pads out there and the ebcs are by far the best
#31
Safety Car
Thread Starter
Originally Posted by joedokes28
Why?
I have the slotted rotoras and axxis ultimates pads, and the car stops awesome with no fade, but the dust is unbelievable.
I have the slotted rotoras and axxis ultimates pads, and the car stops awesome with no fade, but the dust is unbelievable.
#34
Suzuka Master
Join Date: Sep 2000
Location: Woodstock, GA
Age: 53
Posts: 9,431
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by allmotor_2000
Steve - that sounds tempting, let's chat!
#37
Team Owner
iTrader: (1)
Join Date: May 2003
Location: Leesburg, Virginia
Age: 41
Posts: 36,474
Received 249 Likes
on
175 Posts
I already had the stock calipers powdercoated and the rotoras and SS lines go on Tueday. But Willwood calipers would be nice ![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
Then I could sell the powder coated calipers in the B.M.
![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
Then I could sell the powder coated calipers in the B.M.
![:O](https://acurazine.com/forums/images/smilies/embarrassment.gif)
#38
Suzuka Master
Join Date: Sep 2000
Location: Woodstock, GA
Age: 53
Posts: 9,431
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by mrsteve
^ I wish all airports would do that ![:O](https://acurazine.com/forums/images/smilies/embarrassment.gif)
![:O](https://acurazine.com/forums/images/smilies/embarrassment.gif)
The AT&T wireless here in RDU is not free. But it is one of the fastest I have used, current connected at 54 Mbps, and my VPN hasn't hickuped once.
#39
Team Owner
iTrader: (1)
Join Date: May 2003
Location: Leesburg, Virginia
Age: 41
Posts: 36,474
Received 249 Likes
on
175 Posts
Originally Posted by scalbert
I could probably do up the bracket and made the CAD drawing available. ![Wink](https://acurazine.com/forums/images/smilies/wink.gif)
![Wink](https://acurazine.com/forums/images/smilies/wink.gif)
CAD would be nice.
Do you know of a supplier who would sell just the new caliper?
#40
Suzuka Master
Join Date: Sep 2000
Location: Woodstock, GA
Age: 53
Posts: 9,431
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by mrsteve
CAD would be nice.
Do you know of a supplier who would sell just the new caliper?
Do you know of a supplier who would sell just the new caliper?
I was going to get the caliper from a local circle track shop which is right around the corner form my office.