so uhh... I bent my rim afterall :(
#1
The Creator
Thread Starter
so uhh... I bent my rim afterall :(
well... yall remember my altercation with a pot hole the other day that cause my tire to blow?
well, that was thursday... I got my car back with a new tire on Saturday.
welp, past 2 days i've noticed a huge amount of vibration...
called the speed shop where i got the tire... asked AJ if i could come in tomorrow to get the tires balance checked.
he goes, "sure, but uhh... didnt Adam (sales) tell you you wheel was bent???" I'm like... uhhhhhh... noooooooooo.
Turns out the inside of my rim was bent and AJ had to straighten it out.
He thinks thas prolly why I'm gettin all the vibration.
So nonetheless, Im getting the tire rebalanced tomorrow, and putting that wheel on the back, then placing an order for a new wheel
Fuck. I'm so pissed bout this... mostly cuz I thought I was in the fuckin clear! heh.
well, that was thursday... I got my car back with a new tire on Saturday.
welp, past 2 days i've noticed a huge amount of vibration...
called the speed shop where i got the tire... asked AJ if i could come in tomorrow to get the tires balance checked.
he goes, "sure, but uhh... didnt Adam (sales) tell you you wheel was bent???" I'm like... uhhhhhh... noooooooooo.
Turns out the inside of my rim was bent and AJ had to straighten it out.
He thinks thas prolly why I'm gettin all the vibration.
So nonetheless, Im getting the tire rebalanced tomorrow, and putting that wheel on the back, then placing an order for a new wheel
Fuck. I'm so pissed bout this... mostly cuz I thought I was in the fuckin clear! heh.
#2
trying to get a lil V-I
damn man...that's no good.
I really really want to get rims, but I fear that the roads around here would tear it to pieces.
I mean, just running on stocks has gotten me close to a bent rim already. I can't image 35 series.
I really really want to get rims, but I fear that the roads around here would tear it to pieces.
I mean, just running on stocks has gotten me close to a bent rim already. I can't image 35 series.
#4
Senior Moderator
the perils of having 19's... :sqnteek:
#6
Team Owner
Join Date: Oct 2000
Location: Hellertown, Pa. USA
Age: 57
Posts: 20,014
Likes: 0
Received 0 Likes
on
0 Posts
What about getting it repaired?
There is a place near me that does this and I’m sure there are places up near you.
Shawn S
Wheel Collision Center
There is a place near me that does this and I’m sure there are places up near you.
Shawn S
Wheel Collision Center
#7
The Creator
Thread Starter
whats involved in repair beyond straigtening it?
my wheel is back to straight... hopefully rebalancing will solce the vibration.
either way tho i just dont feel right riding round on a fixed bent rim.
then again, i spent all winter on a stock wheel that was straightened after being bent.
my wheel is back to straight... hopefully rebalancing will solce the vibration.
either way tho i just dont feel right riding round on a fixed bent rim.
then again, i spent all winter on a stock wheel that was straightened after being bent.
Trending Topics
#8
Honkey
Join Date: Jan 2001
Location: Scottsdale, AZ
Age: 47
Posts: 2,728
Likes: 0
Received 0 Likes
on
0 Posts
I should would like to thank the city of Scottsdale for its wonderful roads. I have yet to hit a pothole, or ever see one, since I put my rims on. Even during construction they keep the roads smooth. I've been to Manhattan and if the roads in your part of NY are anything like theirs, I give you major props for driving on 35 series tires everyday.
#9
The Creator
Thread Starter
manhattan is bad. but ours arent incredibly worse...
ya prolly noticed how many peeps backed me up on that in my flat tire post.
our roads are ass...
not a smooth piece of asphalt in the area....
oh well. my shit looks DOPE either way
ya prolly noticed how many peeps backed me up on that in my flat tire post.
our roads are ass...
not a smooth piece of asphalt in the area....
oh well. my shit looks DOPE either way
#11
Originally posted by 4pumpedCL
I should would like to thank the city of Scottsdale for its wonderful roads. I have yet to hit a pothole, or ever see one, since I put my rims on. Even during construction they keep the roads smooth. I've been to Manhattan and if the roads in your part of NY are anything like theirs, I give you major props for driving on 35 series tires everyday.
I should would like to thank the city of Scottsdale for its wonderful roads. I have yet to hit a pothole, or ever see one, since I put my rims on. Even during construction they keep the roads smooth. I've been to Manhattan and if the roads in your part of NY are anything like theirs, I give you major props for driving on 35 series tires everyday.
#12
Racer
Join Date: Oct 2000
Location: Houston, Texas 77010
Age: 73
Posts: 382
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by WebToker
Ya rub it in!!! Fucking Houston roads are the worst I have seen.
Ya rub it in!!! Fucking Houston roads are the worst I have seen.
I will admit though that I love the look of the 19's. It's just too much drama and money for me. I will just live vicariously through you guys.
#13
('''\_(o_0)_/''')
Join Date: Jan 2001
Location: Nashua NH
Age: 39
Posts: 312
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by WebToker
Ya rub it in!!! Fucking Houston roads are the worst I have seen.
Ya rub it in!!! Fucking Houston roads are the worst I have seen.
NH never paves their roads. Some have gone from paved to being dirt roads from neglet...it's freakin' ridiculous!
#15
The Creator
Thread Starter
Originally posted by AcuraFanatic
Come to NH where we actually have winters and some potholes can measure up to FIVE INCHES deep (not joking).
NH never paves their roads. Some have gone from paved to being dirt roads from neglet...it's freakin' ridiculous!
Come to NH where we actually have winters and some potholes can measure up to FIVE INCHES deep (not joking).
NH never paves their roads. Some have gone from paved to being dirt roads from neglet...it's freakin' ridiculous!
heh... same here. Northeast sucks.
the pothole that did this to me? over a foot deep... just wide enough for the wheel...
im AMAZED i didnt scratch it.
and all you people worryin bout the 19's GET OVER IT. Like I said... I've gone through 3 stock 17's...
So your gonna bend your wheel no matter what... but umm... it just cost more to replace the 19s
#16
I'd rather be golfing
Join Date: Dec 2001
Location: Knoxville, TN
Posts: 263
Likes: 0
Received 0 Likes
on
0 Posts
The roads here in Atlanta were bad but now are getting better. The new mayor created what she called the "pothole posse" and a hotline to fix all the potholes in the city...all in the first several months that she was in office. I hardly see any potholes now!
...those 19's look sweet , sorry to here about the bent rim though.
...those 19's look sweet , sorry to here about the bent rim though.
#17
Adult Supervision
Join Date: Oct 2000
Location: Wicked Retahded North of Bahstin
Age: 62
Posts: 2,424
Likes: 0
Received 0 Likes
on
0 Posts
Soopa,
You might check with the DPW responsible for that road and see if they will pick up part of the tab. I remember about 5 years ago there was a monster pothole on 287 near the Tappan Zee bridge that one morning took out 12 cars - they all got flat tires on the spot. The highway commission paid the tabs for towing and repairs because they new this one was not your ordinary pothole.
Now I would expect them to blame some on you and your 19's but maybe they would provide some compensation...
You might check with the DPW responsible for that road and see if they will pick up part of the tab. I remember about 5 years ago there was a monster pothole on 287 near the Tappan Zee bridge that one morning took out 12 cars - they all got flat tires on the spot. The highway commission paid the tabs for towing and repairs because they new this one was not your ordinary pothole.
Now I would expect them to blame some on you and your 19's but maybe they would provide some compensation...
#19
The Creator
Thread Starter
Originally posted by Scooter
i think it's time u move away from roads dating back to George Washington days :shakehd:
i think it's time u move away from roads dating back to George Washington days :shakehd:
#20
FvCK KNvCKLE
Join Date: Jan 2001
Location: Detroit, MI.
Posts: 2,368
Likes: 0
Received 0 Likes
on
0 Posts
Re: so uhh... I bent my rim afterall :(
Originally posted by soopa
Fuck. I'm so pissed bout this... mostly cuz I thought I was in the fuckin clear! heh.
Fuck. I'm so pissed bout this... mostly cuz I thought I was in the fuckin clear! heh.
Go to http://www.hunter.com and look at the info on the GSP9700. There a tab at the top of the page that allows you to put in your zip and locate one, at a business, in your area.
I swear by this machine. It checks the dia. of the rim and the tire, applies a road force, measures vibration, and then tells the tech exactly where to place the tire on the wheel, and then where to put the weights.
#21
The Creator
Thread Starter
Re: Re: so uhh... I bent my rim afterall :(
Originally posted by Rock Dog
If the guy did a decent job straightening the rim, get a Road Force Measurement balance.
Go to http://www.hunter.com and look at the info on the GSP9700. There a tab at the top of the page that allows you to put in your zip and locate one, at a business, in your area.
If the guy did a decent job straightening the rim, get a Road Force Measurement balance.
Go to http://www.hunter.com and look at the info on the GSP9700. There a tab at the top of the page that allows you to put in your zip and locate one, at a business, in your area.
OTTO Cadillac has one... their service area is squeaky clean. I'll try them out.
hmm, or maybe I should try Audi since they prolly see a lot of bent rims..........
#23
The Creator
Thread Starter
Originally posted by niz181
yo soopa whats the offset you running on those?
yo soopa whats the offset you running on those?
Tom... awesome tip! Checking out gsp9700.com... some cool shit!
After my "traditional balancing" tonight... imma schedule a appt with someone who has htis system.
Thread
Thread Starter
Forum
Replies
Last Post
4drviper
3G TL Tires, Wheels & Suspension
2
09-23-2015 07:42 PM