P2R Plenum Spacer Kit Groupbuy: CL-P, TL-P
#1
Thread Starter
Former Sponsor
iTrader: (1)
Joined: Mar 2004
Posts: 9,877
Likes: 624
From: www.ExceleratePerformance.com
P2R Plenum Spacer Kit Groupbuy: CL-P, TL-P
Here it is Acurazine, a new mod for the CL-P, TL-P brought to you by Excelerate Performance and P2R. Most mods are for the Type S but P2R has come out with an innovative product for the premium models. This spacer kit is guaranteed to add at least 3-6 hp. P2R will conduct before and after dynos once the product is produced to verify the actual number.
This Plenum Spacer Kit will fit the 00-03 TL-P and 01-03 CL-P. Here is what the kit includes:
2 - Plenum Spacers
1 - Intake Manifold Spacer
2 - Plenum Gaskets
1 - Thermal Intake Manifold Gasket
All Bolts are included. Kit comes all ready for install.
We need 10 ppl to make this Groupbuy happen. Once we reach 5 ppl P2R will start making the product. ETA for shipment is the 2nd week of Feb. List price is $399.99 but for this GB we will do $349 shipped to the cont US if we get 10 participants.
This Plenum Spacer Kit will fit the 00-03 TL-P and 01-03 CL-P. Here is what the kit includes:
2 - Plenum Spacers
1 - Intake Manifold Spacer
2 - Plenum Gaskets
1 - Thermal Intake Manifold Gasket
All Bolts are included. Kit comes all ready for install.
We need 10 ppl to make this Groupbuy happen. Once we reach 5 ppl P2R will start making the product. ETA for shipment is the 2nd week of Feb. List price is $399.99 but for this GB we will do $349 shipped to the cont US if we get 10 participants.
#2
Thread Starter
Former Sponsor
iTrader: (1)
Joined: Mar 2004
Posts: 9,877
Likes: 624
From: www.ExceleratePerformance.com
Also for further reference:
The Intake manifold spacer will be 1/4"; in combination with the thermal intake manifold gasket provided it will make the total thickness about 1/2".
The plenum spacers will be somewhere between 1/4" and 3/8". It will need to be milled down to make sure it seals and there is a flat surface. So although it will start thicker it will end up somewhere in between the measurements above.
The Intake manifold spacer will be 1/4"; in combination with the thermal intake manifold gasket provided it will make the total thickness about 1/2".
The plenum spacers will be somewhere between 1/4" and 3/8". It will need to be milled down to make sure it seals and there is a flat surface. So although it will start thicker it will end up somewhere in between the measurements above.
Trending Topics
#9
Josh, I have the CL-S plenums, i didn't know that i need the manifold thermal spacers in order to not have the valve covers hit the intake manifold. Can you give me a price of the spacer and when i'll get it if i pay you today?
#10
i'd be interested if i saw already proven results as of...now!
sorry, can't promise my $$ on something not 100%
keep us CLPers updated, thanks!
(and yeah i rather pay $399 after the mod is proven than to lose $350 if it might give 3-6...)
sorry, can't promise my $$ on something not 100%
keep us CLPers updated, thanks!
(and yeah i rather pay $399 after the mod is proven than to lose $350 if it might give 3-6...)
Thread
Thread Starter
Forum
Replies
Last Post
MrHeeltoe
1G TSX Tires, Wheels, & Suspension
20
02-23-2023 01:54 PM
MrHeeltoe
2G TSX Tires, Wheels & Suspension
3
09-29-2015 10:43 PM
MrHeeltoe
3G TL Tires, Wheels & Suspension
0
09-28-2015 05:43 PM