Are new pulleys really worth it?
#1
Safety Car
Thread Starter
Are new pulleys really worth it?
The FAQ says you get about a 3 HP boost from installing an aftermarket pulley, yet I notice a lot of people still do it. Is it really worth the effort, or are people mostly doing it to satisfy an addiction to mods?
#5
lowrd on tein CS biatch
iTrader: (2)
yes Rajca is right^^^ aside from slightly less amps being generated, there is only GAINS..
I swear to GOD it feels like adding another intake to the car...
I'd put money on it that the pulley adds more.
BUT NO ONE has done a b4 and after dyno that I have seen.
I swear to GOD it feels like adding another intake to the car...
I'd put money on it that the pulley adds more.
BUT NO ONE has done a b4 and after dyno that I have seen.
#6
3.7L Nitrous Breathing CL
iTrader: (7)
I have the full UR kit.And OP you need this.It will get you off the line quicker for sure.It's not one of those mods where your wondering to yourself,"did it really do anything" you will be able to tell the first time you hit the gas.
Also your going to free up 2hp from every 1lbs off the crankshaft.
3hp is a bit under, 3hp you probally would not even feel.
I don"t see any down side running light weight pulleys,unless it's the underdrivin one's that will slow the alts charging especially at idle.
Also your going to free up 2hp from every 1lbs off the crankshaft.
3hp is a bit under, 3hp you probally would not even feel.
I don"t see any down side running light weight pulleys,unless it's the underdrivin one's that will slow the alts charging especially at idle.
#7
Safety Car
Thread Starter
Is this something I could probably do myself, or would I have to find a shop that'll install it for me? Excuse the noob question, the only other mod I've done to my CL is a CAI...
Also, are you all using stock size or the smaller ones like Rajca talked about? I'm looking at a few sites here and there, none are really telling me if they're the same size as OEM, or if they're the smaller size...
Also, are you all using stock size or the smaller ones like Rajca talked about? I'm looking at a few sites here and there, none are really telling me if they're the same size as OEM, or if they're the smaller size...
Trending Topics
#9
3.7L Nitrous Breathing CL
iTrader: (7)
light weight underdrivin one will give even more hp than the just the light weight one.And as long as you dont have a crazy system you will be fine. it's fairly easy to acomplish but,if not capable it should only cost you about 75 for all pulleys
Last edited by richardparker; 10-17-2009 at 02:53 PM.
#14
lowrd on tein CS biatch
iTrader: (2)
here is EXACTLY what i bought and the SAME PRICE!
only thing off ebay I have on my car. And it's the BEST $ per HP without a doubt.
The belts cost me 60 so.. 80 all said and done. not expensive at all!!
DAMN they just upped their s/h fees. oh well.. still not e
http://cgi.ebay.ca/97-02-ACURA-CL-99...item518947f773
When you get it in the mail and look at it it's AMAZING you only paid so little for the damn thing.
I thought the metal was worth more than what I paid.
only thing off ebay I have on my car. And it's the BEST $ per HP without a doubt.
The belts cost me 60 so.. 80 all said and done. not expensive at all!!
DAMN they just upped their s/h fees. oh well.. still not e
http://cgi.ebay.ca/97-02-ACURA-CL-99...item518947f773
When you get it in the mail and look at it it's AMAZING you only paid so little for the damn thing.
I thought the metal was worth more than what I paid.
#15
3.7L Nitrous Breathing CL
iTrader: (7)
option pulley is a ebay pulley that I've seen them at times 10+shipping. But I rather also go with a brand with proven results and will stand beheind they're stuff.
When I first got them I was sure witch pulley I wanted but bought the underdrive set from a auction.I called ur they explained everything and said If i want to change pulleys there did'nt care who I bought them from.If they were unused they would swap me for witch ever pulley I wanted.
It's hard to find that kind of service anywhere.
Also when I bought mine they had no instructions to get the proper belts,called them in maybe 2 minutes had the part numbers for 2 differnt brands.They cost but,its worth it.
When I first got them I was sure witch pulley I wanted but bought the underdrive set from a auction.I called ur they explained everything and said If i want to change pulleys there did'nt care who I bought them from.If they were unused they would swap me for witch ever pulley I wanted.
It's hard to find that kind of service anywhere.
Also when I bought mine they had no instructions to get the proper belts,called them in maybe 2 minutes had the part numbers for 2 differnt brands.They cost but,its worth it.
#16
lowrd on tein CS biatch
iTrader: (2)
^^^^ dude there are DIY's on the option pulley. I dunno why on earth you'd go anywhere but with Option.
Take it from a guy RUNNING it on his car right now. It works, it's impresses and moreover it will not deteriorate nor discolor since it is bare aluminum.
I did CAI first then the Option pulley.
HONESTLY the pulley was noticed more with regards to power and high reving HAPPINESS.
To all you who do not get the option pulley, and have bought or will by a "name brand" think of all the free gas you've just pissed away.
Take it from a guy RUNNING it on his car right now. It works, it's impresses and moreover it will not deteriorate nor discolor since it is bare aluminum.
I did CAI first then the Option pulley.
HONESTLY the pulley was noticed more with regards to power and high reving HAPPINESS.
To all you who do not get the option pulley, and have bought or will by a "name brand" think of all the free gas you've just pissed away.
#17
Whats up with RDX owners?
iTrader: (9)
Ive run the Option pulley for about 20k miles so far with absolutely no issues.
With belts everything cost just under $60. It definately freed up some power and the car revs much nicer now.
With belts everything cost just under $60. It definately freed up some power and the car revs much nicer now.
#20
Whats up with RDX owners?
iTrader: (9)
Gates K040425 and K060441.
Now looking at my receipt for the belts I see that I paid less then $60 for everything. The belts were $26.69 shipped, the pulley was $23.95 shipped, for a total of $50.64. Im a receipt whore
Now looking at my receipt for the belts I see that I paid less then $60 for everything. The belts were $26.69 shipped, the pulley was $23.95 shipped, for a total of $50.64. Im a receipt whore
#22
wham bam thank you ma'am
iTrader: (8)
??????????
http://cgi.ebay.com/ebaymotors/GATES...Q5fAccessories
http://cgi.ebay.com/ebaymotors/GMC-N...ehicleQ5fParts
????????
that what i need?
http://cgi.ebay.com/ebaymotors/GATES...Q5fAccessories
http://cgi.ebay.com/ebaymotors/GMC-N...ehicleQ5fParts
????????
that what i need?
#23
Whats up with RDX owners?
iTrader: (9)
Looks right, but I got mine on Amazon from Auto Parts 123.
#24
Former Sponsor
iTrader: (1)
Yes it is worth it. Unorthodox Racing makes a crank pulley (underdrive or stock diameter for those with larger stereos) or a pulley set (includes crank, alternator, and power steering). On the TSX gains were 10whp and 10 wtq. You should be able to see gains of 7-8 hp from the crank pulley.
#30
Whats up with RDX owners?
iTrader: (9)
Thats because Option only sells the crank pulley. You may find the whole UR pulley set every now and then, but the vendors sell them.
#31
Safety Car
Thread Starter
Wow, now I'm a bit confused about the whole thing. You guys are kinda going over my head with this thing (I'm a newbie to car mechanics, again.)
#32
lowrd on tein CS biatch
iTrader: (2)
ok the main pulley you wanna change is the crank pulley (the one the motor spins off the drive shaft). When you by that it's made of aluminum and not steel so you shave several pounds off the rotational mass of the motor. So you a making it easier to spin basically.
By shaving off weight and getting the underdrive version(the one that is smaller than the stock pulley) not only do you gain POWER from weight loss, but you gain it from spinning the accessories less also.
Which is why you will have less power from the alternator at idle.
So you can buy the option one for like 30 to ur door. and get 8 hp and tq about. maybe more.
Or u can spend 2-300 and get all 3 pulleys (crank, alternator, power steering)
And those extra 2 don't even get you 1/2 of what the CRANK pulley does.
So it doesn't make much sense if you look at ur opportunity/cost ratio LOL economics.
By shaving off weight and getting the underdrive version(the one that is smaller than the stock pulley) not only do you gain POWER from weight loss, but you gain it from spinning the accessories less also.
Which is why you will have less power from the alternator at idle.
So you can buy the option one for like 30 to ur door. and get 8 hp and tq about. maybe more.
Or u can spend 2-300 and get all 3 pulleys (crank, alternator, power steering)
And those extra 2 don't even get you 1/2 of what the CRANK pulley does.
So it doesn't make much sense if you look at ur opportunity/cost ratio LOL economics.