New Manifold with Intercooler
#1
Suzuka Master
Thread Starter
Join Date: Sep 2000
Location: Woodstock, GA
Age: 54
Posts: 9,431
Likes: 0
Received 0 Likes
on
0 Posts
New Manifold with Intercooler
I got started last night after taking some more measurement. It looks like there might be a slight fitment issue with the way I had planned on installing the unit. There is a wiring harness which might be in the way.
So to be sure I mocked up the new manifold/IC in cardboard and will test fit it today or this weekend; time permitting of course. I'll pull the stock manifold and fit this cardboard piece in. If there wiring harness is in the way I'll see if it can be moved slight as it appears it can once the IMRC actuator is removed.
Outside of that it should be straight forward. I'll order up the aluminum plate I need for the base mounting plate and drill it out as needed. From there I will use some sheet metal to form the main plenum and quickly torch weld it in place before having it MIG welded.
One other thing IO found out, Top-End also sells air horns for the runner attachment.
So to be sure I mocked up the new manifold/IC in cardboard and will test fit it today or this weekend; time permitting of course. I'll pull the stock manifold and fit this cardboard piece in. If there wiring harness is in the way I'll see if it can be moved slight as it appears it can once the IMRC actuator is removed.
Outside of that it should be straight forward. I'll order up the aluminum plate I need for the base mounting plate and drill it out as needed. From there I will use some sheet metal to form the main plenum and quickly torch weld it in place before having it MIG welded.
One other thing IO found out, Top-End also sells air horns for the runner attachment.
![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
#4
Suzuka Master
Thread Starter
Join Date: Sep 2000
Location: Woodstock, GA
Age: 54
Posts: 9,431
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Ray Khan
nice...I've been doing that too lately trying to test fit for my front mount.
nice...I've been doing that too lately trying to test fit for my front mount.
![Wink](https://acurazine.com/forums/images/smilies/wink.gif)
![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
#7
Suzuka Master
Thread Starter
Join Date: Sep 2000
Location: Woodstock, GA
Age: 54
Posts: 9,431
Likes: 0
Received 0 Likes
on
0 Posts
I pulled the manifold and did a test fit. Right off it doesn't fit; it was hitting the stock strut tower brace and a wiring harness, but not by much. However, my mock up unit does have all squared edges. So I compressed the edges some to simulate the rounded edges of the actual unit and it fit in beautifully.
I also checked the hood clearance on the front plenum and it was fine but close; too close for engine rotation. So I'll angle that part a little to give about a one inch gap.
I just need to verify the radius on the end tank by either a picture or a detailed drawing. After that I'll go ahead and purchase the unit.
Pictures are below:
I also checked the hood clearance on the front plenum and it was fine but close; too close for engine rotation. So I'll angle that part a little to give about a one inch gap.
I just need to verify the radius on the end tank by either a picture or a detailed drawing. After that I'll go ahead and purchase the unit.
Pictures are below:
Trending Topics
#9
Suzuka Master
Thread Starter
Join Date: Sep 2000
Location: Woodstock, GA
Age: 54
Posts: 9,431
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by allmotor_2000
Steve... please check to make sure the hood closes!
Steve... please check to make sure the hood closes!
#12
Suzuka Master
Thread Starter
Join Date: Sep 2000
Location: Woodstock, GA
Age: 54
Posts: 9,431
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Ray Khan
Scalbert....is a top mount the only place where there is room? Seems kinda counter productive without a hood scoop no?
Scalbert....is a top mount the only place where there is room? Seems kinda counter productive without a hood scoop no?
#13
Senior Moderator
steve, you rock. ![Butt Head](https://acurazine.com/forums/images/smilies/butthead.gif)
i'm excited to see this project moving along, for more than one reason.
![Butt Head](https://acurazine.com/forums/images/smilies/butthead.gif)
i'm excited to see this project moving along, for more than one reason.
![Wink](https://acurazine.com/forums/images/smilies/wink.gif)
#15
Suzuka Master
Thread Starter
Join Date: Sep 2000
Location: Woodstock, GA
Age: 54
Posts: 9,431
Likes: 0
Received 0 Likes
on
0 Posts
Woohoo, just got confirmation on the aluminum plate for the base of the plenum. I'm getting two just in case I mess up on the first one.
The aluminum plate measures 1.1" x 3.5" x 13.0" The problem is to take my time to precision drill it...
The aluminum plate measures 1.1" x 3.5" x 13.0" The problem is to take my time to precision drill it...
#16
Three Wheelin'
Join Date: Feb 2003
Location: Grand Rapids, Michigan
Posts: 1,796
Likes: 0
Received 0 Likes
on
0 Posts
Re: New Manifold with Intercooler
Originally posted by scalbert
One other thing IO found out, Top-End also sells air horns for the runner attachment.
One other thing IO found out, Top-End also sells air horns for the runner attachment.
![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
![Big Grin](https://acurazine.com/forums/images/smilies/biggrin.gif)
#21
Suzuka Master
Thread Starter
Join Date: Sep 2000
Location: Woodstock, GA
Age: 54
Posts: 9,431
Likes: 0
Received 0 Likes
on
0 Posts
The main tools I will be using are the drill press, table saw, band saw and rotary grinder. I may try to do some of the welding as an experiment as I haven't done much this and would like to learn; I need to track down a torch though.
#23
Suzuka Master
Thread Starter
Join Date: Sep 2000
Location: Woodstock, GA
Age: 54
Posts: 9,431
Likes: 0
Received 0 Likes
on
0 Posts
Below is the size air horn to be used. I kept mulling this over numerous times trying to decide on the size to use. In the end I used a shorter unit which will decrease the runner length over stock. However, since we are using a roots style blower with excellent low end performance, the potential torque loss would be negated. But the upper end might actually be helped to further extend the torque before dropping off.
The height is about 1/3 of the chamber height with decent radiused edges.
The height is about 1/3 of the chamber height with decent radiused edges.
#24
Suzuka Master
Thread Starter
Join Date: Sep 2000
Location: Woodstock, GA
Age: 54
Posts: 9,431
Likes: 0
Received 0 Likes
on
0 Posts
As usual, the price is creeping up higher and higher as I get into it more and more. Here is the rough break down so far:
$650 - IC (with vacuum port attachments)
$250 - Plenum (with MAP and IAT ports)
$150 - Air Horns
$50 - Pipe and Couplings
$50 - Pump and Hose
$50 - Reservoir
$150 - Heat Exchanger (high capacity oil cooler)
That is $1350 total. I hope we can get this down some but there is not much room to work with in these items. But in relation to other complete IC kits, this is quite reasonable.
$650 - IC (with vacuum port attachments)
$250 - Plenum (with MAP and IAT ports)
$150 - Air Horns
$50 - Pipe and Couplings
$50 - Pump and Hose
$50 - Reservoir
$150 - Heat Exchanger (high capacity oil cooler)
That is $1350 total. I hope we can get this down some but there is not much room to work with in these items. But in relation to other complete IC kits, this is quite reasonable.
#27
Suzuka Master
Join Date: Apr 2002
Location: Pittsburgh, PA
Age: 48
Posts: 9,940
Likes: 0
Received 0 Likes
on
0 Posts
Great work
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
Hope your letting the places that you deal with know that there is a trail right behind you that will be buying more of their parts...
It just might get you a reduced price...
So far that has worked for me..LOL..
Smitty
#28
Revving at 9K...
That is some nice R&D time you've put in. So are you going to offer this as a kit for other S/C owners to make some money?? ![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
I looking into doing a custom FMIC for my S too, because CT is taking their sweet ass time coming out with the aftercooler.
![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
I looking into doing a custom FMIC for my S too, because CT is taking their sweet ass time coming out with the aftercooler.
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
#29
Suzuka Master
Thread Starter
Join Date: Sep 2000
Location: Woodstock, GA
Age: 54
Posts: 9,431
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by CLS2001_97124
That is some nice R&D time you've put in. So are you going to offer this as a kit for other S/C owners to make some money??
That is some nice R&D time you've put in. So are you going to offer this as a kit for other S/C owners to make some money??
![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
![Wink](https://acurazine.com/forums/images/smilies/wink.gif)
#30
Three Wheelin'
Join Date: Feb 2003
Location: Grand Rapids, Michigan
Posts: 1,796
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by scalbert
I haven't done much this and would like to learn; I need to track down a torch though.
I haven't done much this and would like to learn; I need to track down a torch though.
![Cool](https://acurazine.com/forums/images/smilies/cool.gif)
#32
Suzuka Master
Thread Starter
Join Date: Sep 2000
Location: Woodstock, GA
Age: 54
Posts: 9,431
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by ModAddict
May I suggest,....have those few you are going to put these kits together for,....buy the torch for you,......please!
May I suggest,....have those few you are going to put these kits together for,....buy the torch for you,......please!
![Cool](https://acurazine.com/forums/images/smilies/cool.gif)
![Wink](https://acurazine.com/forums/images/smilies/wink.gif)
Welding Kit
JK, actually my father-in-law has a torch kit if he can find it. I plan on just tacking it in place and then taking it to a guy to either MIG or TIG weld it inside and out.
#33
Suzuka Master
Thread Starter
Join Date: Sep 2000
Location: Woodstock, GA
Age: 54
Posts: 9,431
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Smitty
i dunno how you squeeked that in there without removing the tower brace, but I keep looking at it and it looks AWESOME...
i dunno how you squeeked that in there without removing the tower brace, but I keep looking at it and it looks AWESOME...
#34
im in steve.i cant wait also to see the results of the tb.king told me they reposition the sensor for optimal performance and make it adjustable i guess that will get rid of the lag in first gear.
#37
Suzuka Master
Thread Starter
Join Date: Sep 2000
Location: Woodstock, GA
Age: 54
Posts: 9,431
Likes: 0
Received 0 Likes
on
0 Posts
Nope, no power gain felt. Nor did I expect to. Even being generous with a 10 WHP gain, that is only a 3% difference. Not really enough to feel.