Modified Tails and Heads
Originally Posted by brianlin87
only 'modded' headlights i've seen are those that are custom painted/cleared.
only 'modded' tail lights i've seen are those that are tinted.
only 'modded' tail lights i've seen are those that are tinted.
I think there's some OLD pictures of Ronjon's old car where he had a strip of vinyl going through half of the light in a crescent shape. It gave off the same kind of look that Benzes had. I didn't like it though =/ cause it didn't look right.
Trending Topics
The diffusers are actually tinted with a window film and I can't remember the percentage I used. The blinkers are above that, the diffuser section (tinted part on bottom) is just a non-blinking parking light. As for the inside of the blinker section (top part) being painted, it looks just fine when blinking in the day light and at night. Actually, at night, if you notice it, it looks a bit stealthy when the lights are on.
Here's a shot with the lights on...
Here's a shot with the lights on...
Originally Posted by ccannizz11
CLEAR!!!

I have an 01, but with 03 tails (only "mod" I've made to the tails other than bulbs)

I have an 01, but with 03 tails (only "mod" I've made to the tails other than bulbs)
How you do it? I mean did you cleared the head or you buy new ones? Very nice job! Same questions for road lights!
Originally Posted by Jo3f1sh
^^^^
Those headlights look sharp...i think i might actually do that to mine...how hard was it to do?
Those headlights look sharp...i think i might actually do that to mine...how hard was it to do?
that and I had to stop in the middle to go get some better tools.Here's a link to the DIY that I used. EDIT: LOL, I can't post a direct link to the DIY on this forum
j/k but if you go here: www.ccannizzaro.com/projectsmain.html there is a link to the DIY near the bottom of the page. Only I didn't use the oven to bake mine, I tried but my oven sucked, so I used a hairdryer to soften the seal.
Originally Posted by Balfa
Hi,
How you do it? I mean did you cleared the head or you buy new ones? Very nice job! Same questions for road lights!
How you do it? I mean did you cleared the head or you buy new ones? Very nice job! Same questions for road lights!
As for the road lights, I didn't do anything to those except change the bulbs to PIAA's.
Originally Posted by Jo3f1sh
I'm thinking i'm too big of a pussy to pull my headlights apart...maybe i can find another set and attempt it...lol...
looks good nonetheless
looks good nonetheless
Originally Posted by Jo3f1sh
I'm thinking i'm too big of a pussy to pull my headlights apart...maybe i can find another set and attempt it...lol...
looks good nonetheless
looks good nonetheless
you cant really screw up......its 2 big puzzle pieces. The hardest part for me was taking off the bumper. The oven does not get hot enough to melt anything but the sealer.
Originally Posted by 01CLKID

Your lights look wicked tinted like that.

Sorry no modded tailights, only some morning dew on them.
check out my plate frame, I think that would look pretty straight on your car.
Got it at pepboys for like $20 and its very sturdy. I switch plate frames around often, got a comptech one, got that one, got a couple of Miami Hurricane ones.
Originally Posted by CleanCL
TCM 01 CL-S - is that a comptech exhaust? those tips look nice, anymore pictures?
Some Pixs:


I could take some close ups tommorow if you'd like.
Thread
Thread Starter
Forum
Replies
Last Post
rp_guy
Member Cars for Sale
9
Jul 16, 2017 07:33 AM
CL-S progression 01
Car Parts for Sale
65
Jan 26, 2016 04:15 PM
Eggs999bacon
2G TSX (2009-2014)
10
Sep 24, 2015 10:08 AM




i recently put them back to stock but I might put the tint back on
and the road lamps

