loving the option pulley!
#1
loving the option pulley!
So i had just the intake on my car and my bro's got a prelude h22a with headers, intake.
Now i know the cl is faster stock vs stock but here's the news.
We ripped 3rd gear vs 3rd gear (Prelude: intake/headers) (CL: intake) and I was just creeping on him.
THEN I installed the skunk 2 intake manifold on his car, and got the option pulley on my CL and did it again..
OOOWWWW WEEEE.... and i pulled this time much! more (from 100-160km/h in 3rd) (60-100mph)
FOR THE RECORD: I'm only talking about 3rd cause that's the closest point for the 2 cars... 1st and 2nd i own him. so we wanted to get some sort of a similarity for comparison.
HATS FUCKIN OFFFF to the underdrive pulley. I'm thinkin 10hp gain at max rpms for sure. Definately freed up a lot of shit at high rpms.
I didn't think I'd see a noticable gain but god damn.
So after adding the intake manifold to the prelude, and adding JUST the pulley to the CL, the CL was pulling even more on the prelude. THUS: i gained MUCH more off the pulley vs bro's intake manifold (oh anddd new fuel injectors cause his were cracked)
Just to let everyone know who may have their doubts. I would like to rectify them.
This mod is the SHIZZLE for RIZZLLE
hahaha hadd to say that
Now i know the cl is faster stock vs stock but here's the news.
We ripped 3rd gear vs 3rd gear (Prelude: intake/headers) (CL: intake) and I was just creeping on him.
THEN I installed the skunk 2 intake manifold on his car, and got the option pulley on my CL and did it again..
OOOWWWW WEEEE.... and i pulled this time much! more (from 100-160km/h in 3rd) (60-100mph)
FOR THE RECORD: I'm only talking about 3rd cause that's the closest point for the 2 cars... 1st and 2nd i own him. so we wanted to get some sort of a similarity for comparison.
HATS FUCKIN OFFFF to the underdrive pulley. I'm thinkin 10hp gain at max rpms for sure. Definately freed up a lot of shit at high rpms.
I didn't think I'd see a noticable gain but god damn.
So after adding the intake manifold to the prelude, and adding JUST the pulley to the CL, the CL was pulling even more on the prelude. THUS: i gained MUCH more off the pulley vs bro's intake manifold (oh anddd new fuel injectors cause his were cracked)
Just to let everyone know who may have their doubts. I would like to rectify them.
This mod is the SHIZZLE for RIZZLLE
hahaha hadd to say that
Last edited by CL-S progression 01; 06-19-2009 at 04:48 PM.
#2
B A N N E D
iTrader: (1)
Join Date: Feb 2001
Location: The grande.. Riverdale NJ.. Hopefully moving to skyline village in Lincoln park NJ..yes dirty jersey
Age: 45
Posts: 4,657
Likes: 0
Received 3 Likes
on
3 Posts
Nice....
After installing mine I really did not notice any difference in power..
My AC does seem to blow colder and it seems easier to steer but it might just be in my head..
After installing mine I really did not notice any difference in power..
My AC does seem to blow colder and it seems easier to steer but it might just be in my head..
#7
B A N N E D
iTrader: (1)
Join Date: Feb 2001
Location: The grande.. Riverdale NJ.. Hopefully moving to skyline village in Lincoln park NJ..yes dirty jersey
Age: 45
Posts: 4,657
Likes: 0
Received 3 Likes
on
3 Posts
BTW you will also need new PS and alternator belt cuz ita undrive pulley which means its smaller then the stock pulley!
Trending Topics
#10
yes there is a DIY in the tl section i think which is identical.
You will need new belts... the ones everyone is using in the US are not the same as the ones found in canada. IE they are not available.
If you cannot find them then use the ones I have in this thread. They're on my car now and work like a charm.
https://acurazine.com/forums/2g-cl-2001-2003-50/am-i-unlucky-canada-just-f%2A%2A%2Aed-725699/
^^^^This will solve a lot of the belt questions for you.
You will need new belts... the ones everyone is using in the US are not the same as the ones found in canada. IE they are not available.
If you cannot find them then use the ones I have in this thread. They're on my car now and work like a charm.
https://acurazine.com/forums/2g-cl-2001-2003-50/am-i-unlucky-canada-just-f%2A%2A%2Aed-725699/
^^^^This will solve a lot of the belt questions for you.
#12
Registered Abuser
iTrader: (1)
yes there is a DIY in the tl section i think which is identical.
You will need new belts... the ones everyone is using in the US are not the same as the ones found in canada. IE they are not available.
If you cannot find them then use the ones I have in this thread. They're on my car now and work like a charm.
https://acurazine.com/forums/showthread.php?t=725699
^^^^This will solve a lot of the belt questions for you.
You will need new belts... the ones everyone is using in the US are not the same as the ones found in canada. IE they are not available.
If you cannot find them then use the ones I have in this thread. They're on my car now and work like a charm.
https://acurazine.com/forums/showthread.php?t=725699
^^^^This will solve a lot of the belt questions for you.
and lastly, did it REALLY make a difference? in gains?
thanks
#16
Suzuka Master
iTrader: (3)
lol its not what you think im taking off my option racing underdrive pulley to put on a UR stock size pulley because of my blower. my friend has asked for it but i dont think he going to take it, if not you can have it. i wont have any use for it anymore. just pay the shipping.
#18
k I don't know HOW to express myself any more than I just did. YES it makes BIG difference. It's at least the equivalent of an intake
I noticed more with the pulley than the intake, I swear.
10hp minimum I'd say.
When I got the car stock it would lul up past 6300rpms like it was asking for the next gear.
Now i can hit the rev limiter when i'm ripping it because it keeps pulling.
remember this mod shaves somewhere near 8-9 lbs off the rotational mass of the car PLUS it spins your accessories ratio-wise much less.
SO the faster you go (the higher u rev) the more it is helping you.
as soon as i got it i put the car in neutral a gave her a quick pedal... and the revs fly up and down in comparison to before. Kinda like what a flywheel would do. Accept with a flywheel you lose TOP end because it has less INERTIA to fight wind forces and such.
I KNOW this because i had a ford probe previously and then did that mod. And then I couldn't break 205km/h when previously the car would go 220.
A pulley won't do this however since it isn't as much of a loss of weight as the flywheel. The option pulley is BASICALLY lightening your crankshaft and taking off extra strain from spinning everything faster than needed.
to answer your question... it is worth it
I noticed more with the pulley than the intake, I swear.
10hp minimum I'd say.
When I got the car stock it would lul up past 6300rpms like it was asking for the next gear.
Now i can hit the rev limiter when i'm ripping it because it keeps pulling.
remember this mod shaves somewhere near 8-9 lbs off the rotational mass of the car PLUS it spins your accessories ratio-wise much less.
SO the faster you go (the higher u rev) the more it is helping you.
as soon as i got it i put the car in neutral a gave her a quick pedal... and the revs fly up and down in comparison to before. Kinda like what a flywheel would do. Accept with a flywheel you lose TOP end because it has less INERTIA to fight wind forces and such.
I KNOW this because i had a ford probe previously and then did that mod. And then I couldn't break 205km/h when previously the car would go 220.
A pulley won't do this however since it isn't as much of a loss of weight as the flywheel. The option pulley is BASICALLY lightening your crankshaft and taking off extra strain from spinning everything faster than needed.
to answer your question... it is worth it
#19
to answer the belt question:
Gates K060441 = Metric 6PK1120 = Goodyear 4060441
Gates K040425 = Metric 4PK1079 = Goodyear 4040425
Those are the brands and the codes.
1st row is the alternator belt THICK one
2nd row is the pwr steering belt THIN one
Gates K060441 = Metric 6PK1120 = Goodyear 4060441
Gates K040425 = Metric 4PK1079 = Goodyear 4040425
Those are the brands and the codes.
1st row is the alternator belt THICK one
2nd row is the pwr steering belt THIN one
#20
Whats up with RDX owners?
iTrader: (9)
Nice, but he really needs a tune with that manifold.
#29
I got it on my 99tl and been about for more than 4k miles. Love it the way it does as CL guys said.I will start a thread about the option pulley in TL section just waiting to be sure problem free.
#32
Moderator Alumnus
#34
Suzuka Master
iTrader: (3)
trust me the option pulley is perfectly fine. its doing the same thing as UR but cheaper. plenty of people have bought it and they have had no problems. the only reason im taking off my option pulley is because f the blower if it werent for that i would just keep my option pulley.
Last edited by p.diddy; 06-26-2009 at 09:05 PM.
#35
B A N N E D
iTrader: (1)
Join Date: Feb 2001
Location: The grande.. Riverdale NJ.. Hopefully moving to skyline village in Lincoln park NJ..yes dirty jersey
Age: 45
Posts: 4,657
Likes: 0
Received 3 Likes
on
3 Posts
<--------option Pulley...works fine.....looked like a quality product..all the tech were amazed it was only $25 shipped...U dont need to spend 8X more on unorthodox!
#38
Three Wheelin'
iTrader: (3)
Join Date: Sep 2008
Location: Chicagoland
Age: 34
Posts: 1,648
Likes: 0
Received 0 Likes
on
0 Posts
looks can be deceiving...........
Its peace of mind for me
If it was an ebay intake, that just sits there, then i would use your logic-----> "It's not like a piece of aluminum can fail". But this is a piece that spins thousands of times per minute.
Engine mods are something that you dont want to be cheap on............ive learned that the hard way
in the end.........my
![2 Cents](https://acurazine.com/forums/images/smilies/2cents.gif)