Innovative Motor Mount Problems Revisited - AcuraZiners Get No Respect
#1
Lead Footed
Thread Starter
Innovative Motor Mount Problems Revisited - AcuraZiners Get No Respect
I couldn't resist this "I Told You So!" post.
It's been a full year with the 3rd gen design of Innovative motor mount installed and it's still holding up. The 3rd gen is 'vertical' and distributes the energy across the face of the mount/bushing. The 2nd gen is ‘horizontal’ and the energy is concentrated along a thin edge resulting in increased vibration and premature bushing failure. See 2nd gen pic below.
3rd Gen Mount Pics
2nd Gen for reference - note this is the 3rd redesign of the 1st gen mount. This lasted mear days, as you can see this design is flawed.
We had a few of us on this forum trying to help Innovative, but they blew us off. Well a year later the design I recommended is still holding up.
That said, the 3rd gen design didn't fix the rear mount vibration problem. It was slightly better and I recommended that Innovative increase the diameter of bushing to absorb more energy, and to make it a 2 stage bushing setup. Meaning a softer inner bushing with a harder outer bushing. We'll never know if this would have worked, but it was the right direction.
I'm hopeful these new mounts from a new manufacture will do the trick, so cross your fingers and say your prayers.
Ruf
It's been a full year with the 3rd gen design of Innovative motor mount installed and it's still holding up. The 3rd gen is 'vertical' and distributes the energy across the face of the mount/bushing. The 2nd gen is ‘horizontal’ and the energy is concentrated along a thin edge resulting in increased vibration and premature bushing failure. See 2nd gen pic below.
3rd Gen Mount Pics
2nd Gen for reference - note this is the 3rd redesign of the 1st gen mount. This lasted mear days, as you can see this design is flawed.
We had a few of us on this forum trying to help Innovative, but they blew us off. Well a year later the design I recommended is still holding up.
That said, the 3rd gen design didn't fix the rear mount vibration problem. It was slightly better and I recommended that Innovative increase the diameter of bushing to absorb more energy, and to make it a 2 stage bushing setup. Meaning a softer inner bushing with a harder outer bushing. We'll never know if this would have worked, but it was the right direction.
I'm hopeful these new mounts from a new manufacture will do the trick, so cross your fingers and say your prayers.
Ruf
#2
Senior Moderator
iTrader: (2)
I set fire to mine & sent them back the melted & chard pieces with a letting of dissatisfaction.
I'm serious. Don't think I even told anyone here.
Never heard a thing back from them.
However I will say I'm still running the side mount & that has held up great. Almost 2 years now.
I'm serious. Don't think I even told anyone here.
Never heard a thing back from them.
However I will say I'm still running the side mount & that has held up great. Almost 2 years now.
#5
Whats up with RDX owners?
iTrader: (9)
I set fire to mine & sent them back the melted & chard pieces with a letting of dissatisfaction.
I'm serious. Don't think I even told anyone here.
Never heard a thing back from them.
However I will say I'm still running the side mount & that has held up great. Almost 2 years now.
I'm serious. Don't think I even told anyone here.
Never heard a thing back from them.
However I will say I'm still running the side mount & that has held up great. Almost 2 years now.
I wish you had pics of that! I can just imagine the look on their faces.
Its a shame these mounts suck and IM doesnt want to address the issues. They are a relatively good company for mounts (for other cars of course).
Trending Topics
#10
Lead Footed
Thread Starter
I set fire to mine & sent them back the melted & chard pieces with a letting of dissatisfaction.
I'm serious. Don't think I even told anyone here.
Never heard a thing back from them.
However I will say I'm still running the side mount & that has held up great. Almost 2 years now.
I'm serious. Don't think I even told anyone here.
Never heard a thing back from them.
However I will say I'm still running the side mount & that has held up great. Almost 2 years now.
Didn't think of doing anything like that, but I did send them a flame mail. They never responded to my last three call or two email.
Ruf
#11
Lead Footed
Thread Starter
https://acurazine.com/forums/showthr...=735396&page=3
Ruf
#13
B A N N E D
iTrader: (4)
I may actually have a set on the way to me. I'll let everyone know on this thread when I do.
https://acurazine.com/forums/showthr...=735396&page=3
Ruf
https://acurazine.com/forums/showthr...=735396&page=3
Ruf
Thread
Thread Starter
Forum
Replies
Last Post
chrisr
5G TLX Audio, Bluetooth, Electronics & Navigation
4
12-04-2015 02:17 AM