ok just got off the phone with one of, if not "the guy" over at RVM about a possible misprint on there description of there lightened pulley for our cars....the pulley is smaller than stock...underdriving the accessories and looks to be identical to the UR product except for the holes....it is 1.8 lbs ,so again approx. the same weight...as some of you have read ,several members have the UR and are very happy...the power gains are there...when i had mine, my idle was smoother and quieter than before...though acouple people have expressed louder idle /low rpm noises(but nothing they seemed upset about).


now the oppertunity...im looking for one possibly 2 members ,members that go to the track and or plan on a dyno soon to receive a Free crank pulley(95$ value)...that member will have to buy the belts 30$'s and have them installed...(this is a potential DIY job)...im to also be included in this initial offering to show high end improvements ...afterwards im sure a group buy can be put together guessing in the 80$ range ...the most bang for the buck mod period at about 8-10hp top to bottom....but let's wait on that until the first few report back....also

please donot PM me or email but instead post here im going to be fair but the people ill be looking for should have been a member for atleast alittle while respected for there opinions and attitude and be a track goer ,and or ready to make a trip to the dyno...before and after install...

 

give it to me, i'm a track nut. i can maybe go 13's w/ this.

 

Is RVM a reputable company?

 

i can do it.

 

i'd love to but my baby's not going to the track unitil I get a few more miles on her

 

Keep that baby in Michigan, give it to darrinb!

 

yea, what he said.

 

did i mention free....come on lets here why you should be the one....

 

Sorry, it'll make my blower go slower. Now if you can give me one to make it go faster, I'm your man. Like I said, send it to Michigan, darrib will do us proud.

 

he's on the short list of possibillities...id like to see someone that just has an ice box....

 

What's the company's website? seriously, a crank pulley is something you need to be sure is made of high quality. So this is the OBX version of headers. A company copied the UR pulley's. That's all good with me, if the quality is on the same level as UR.

 

I might be willing to do it. My CL-S is 100% stock - i'm waiting for my Icebox to arrive. I think i could stand to spend $30 on the belts, and i'm sure some of the Michigan guys here would haul me out to the track quite often.

How much work are we thinking for a DIY install?

 

Whaddaya think aboubt that typeR,...another one from the Great Lakes State!

 

hey im from Mi. myself my dads in the office at 1102 millrights

 

just send it over here man
i go to the track alot, i've been a member for over a year.
plus if this is just as good as the ur pulley i'll be at 14.0 or 13.9 in sub 60 deg weather.

so who doesnt want to see an automatic bolt on go into the 13's?

are new belts also required w/ the ur pulley's??

i hope if i get these they dont fuck up my car.

 

belts are required...about 30$ they wont F up your car and you have an auto???? i thought you had a 6mt? your avatar is of an '03 obviously but i thought those wheels were only on the manny? i guess not....

 

Humm, What does my Sig say? I guess I do have and Icebox.

The other point is that there are several of us going to the track and most have dynos within the past 5 months.

Let me know what you think, I might be in . . . :thinking:

Ruf

 

my car is not stock. but i'll do it if you want.

 

we need someone to do before and after dynos - at the same dyno location.
Theres too much variables/factors at the track

 

read my sig, i have obx headers so i have to have an auto.

14.2 w/ my setup is unheard of, thats why i want the pullies to go 13.9. just think, we have to give these to someone who will make a statement at the track, make those ls1's say damn u were on my ass and the stang gt's say, damn wtf u got in that thang??

honestly right now i see myself as the leading canidate, i'll admit it when someone else steps up for these and deserves them more than me.

Darrin

 

nothing is better than FREE!... I guess it is nice for less than $100... UR charges $269..

Expect less than 10 WHP gain.

 

id do it with before/after dynos but you guys probably arent interested in seeing it on a TL-P

 

^

 

so what are ya thinkin type R???

 

im thinking you're in but im looking for one other candidate...i was hoping for someone with a 6mt and just icebox

 

i was wondering how would you take out the pulley if you wanted to put a stock one back in? according to my friend, because of it's lightweight nature, you have to crack the pulley and actually break it to get it off.

 

your friend is wrong...

 

I only know of one guy with a 6speed, but he is in Austin finishing up school.

There are some other CLS automatics out here, but they have various mods.

Good luck and keep us posted on the results. Speed Freeks always want the news on more and more HP.

Ruf

 

did i mention FREE...and for those that end up getting in on th GB to follow ...about 100$ for a 10/10 bump top to bottom in power...

 

give it to me already

 

give me one too

ill take it!

sidemarker