FLOATING AMP RACK.....MORE PICS! Ernies trunk in progress....
Originally posted by 01blkCL-S
You win!
You are damn good. Is that your car?
You win!
You are damn good. Is that your car?
Originally posted by eclipse23
I'm the lucky recipient of that car and when I saw it today when I came in after work, all I had to say was:
I'm the lucky recipient of that car and when I saw it today when I came in after work, all I had to say was:
how's the dents on passenger side?
Trending Topics
Originally posted by StreetEffectz
NO BLACKLIGHTS in this car at all!
NO BLACKLIGHTS in this car at all!
Fine. More colorered lights in that trunk than at a race. :p
The point is still valid - it's not for everyone.
I, on the otherhand, think it looks MAD PIMP!
Originally posted by StreetEffectz
Labor alone is in the $5000 AREA.....but wait till it's complete, still have another amp to put in, a couple of caps, wiring, the rest of the floor, more vinyl....
Labor alone is in the $5000 AREA.....but wait till it's complete, still have another amp to put in, a couple of caps, wiring, the rest of the floor, more vinyl....
Disregard that post since you have chosen not to receive PM's.
I was at Maple Grove last Sunday for IRDC. Well anyway I saw a blue Ford Explorer with mirror tint, 22" chromes, all the pimp light grills, and a Vortech Supercharger. Well this truck was the highlight of the show. But anyway did you do the install on this truck because the plates were NJ. And this guy had 6 Alumpro Subs (your fav) and 8 Phoneix Gold Amps (I see you use these a lot) And that's what set me off, he also had tv's in the headrest and visor and 2 in the middle console. The install job for the TV's in the headrest didn't look up to your work though. But anyway, was it you?
BTW it was two black guys who owned it.
P.S.-How's the SE t-shirt's going?
I was at Maple Grove last Sunday for IRDC. Well anyway I saw a blue Ford Explorer with mirror tint, 22" chromes, all the pimp light grills, and a Vortech Supercharger. Well this truck was the highlight of the show. But anyway did you do the install on this truck because the plates were NJ. And this guy had 6 Alumpro Subs (your fav) and 8 Phoneix Gold Amps (I see you use these a lot) And that's what set me off, he also had tv's in the headrest and visor and 2 in the middle console. The install job for the TV's in the headrest didn't look up to your work though. But anyway, was it you?
BTW it was two black guys who owned it.
P.S.-How's the SE t-shirt's going?
wow 5g's for install itself..... thats steep.. even for top quality installs like that.... i was looking to spend aroudn 2k on my system total... they have this shop im merced or madera thats suppose to be like #1 in the nation... so im gonna check them out..
Well, the 5K includes the plexi glass, mirror, vinyl, MDF, hardware, etc etc. Just not the EQUIPMENT

You guys really interested in T-shirts? I do have some and I am ordering new ones soon.

You guys really interested in T-shirts? I do have some and I am ordering new ones soon.
No, I'm not really inter... YES IM INTERESTED, HOW MUCH YOU WANT FOR ONE?!

Take a pic of a T-Shirt, I wanna see what it looks like. Then tell me how much for an XL.
Btw, does Ernie's bill include a T-shirt? I woulda held out for one, Ern.

Take a pic of a T-Shirt, I wanna see what it looks like. Then tell me how much for an XL.
Btw, does Ernie's bill include a T-shirt? I woulda held out for one, Ern.
Hey “Street”,
Just an idea:
Why not connect 90 degree Gold plated fittings onto all the connections and run the wires straight down through the Plexi glass.
They would be hidden by the AMP and it would REALLY look like the AMP was truly “floating”.
Shawn S
PS....Ernie, sorry if I just added another 500 bucks to your bill.

Just an idea:
Why not connect 90 degree Gold plated fittings onto all the connections and run the wires straight down through the Plexi glass.
They would be hidden by the AMP and it would REALLY look like the AMP was truly “floating”.
Shawn S
PS....Ernie, sorry if I just added another 500 bucks to your bill.


Originally posted by Shawn S
Hey “Street”,
Just an idea:
Why not connect 90 degree Gold plated fittings onto all the connections and run the wires straight down through the Plexi glass.
They would be hidden by the AMP and it would REALLY look like the AMP was truly “floating”.
Shawn S
PS....Ernie, sorry if I just added another 500 bucks to your bill.

Hey “Street”,
Just an idea:
Why not connect 90 degree Gold plated fittings onto all the connections and run the wires straight down through the Plexi glass.
They would be hidden by the AMP and it would REALLY look like the AMP was truly “floating”.
Shawn S
PS....Ernie, sorry if I just added another 500 bucks to your bill.


Originally posted by kHmER Co
wow 5g's for install itself..... thats steep.. even for top quality installs like that.... i was looking to spend aroudn 2k on my system total... they have this shop im merced or madera thats suppose to be like #1 in the nation... so im gonna check them out..
wow 5g's for install itself..... thats steep.. even for top quality installs like that.... i was looking to spend aroudn 2k on my system total... they have this shop im merced or madera thats suppose to be like #1 in the nation... so im gonna check them out..
Besides who else installs a freaking piece of trim and breaks out a level, even for pieces that you won't even see LOL.
The wires are like that on purpose to stick with the general theme...all the wires will be seen in this install. Don' t get me wrong, I totally dig your idea....I was gonna do that originally.
And Ernie, I like my hit LEVEL
And Ernie, I like my hit LEVEL
Originally posted by eclipse23
Well there's alot not mentioned in that quote blow job like the installation of 2 1.5 farad capacitors, blow job cd shuttle, IVA-C800, digital eq, blow job custom Apexi VFAC mounting, all internal speakers replaced, blow job custom phone mount, etc.blow job 5K is not expensive, especially when you see the end result. I'm not saying it's cheap blow job but any good install shop would be equal if not more. blow job
Besides who else installs a freaking piece of trim and breaks out a level, blow job even for pieces that you won't even see LOL. swallow!
Well there's alot not mentioned in that quote blow job like the installation of 2 1.5 farad capacitors, blow job cd shuttle, IVA-C800, digital eq, blow job custom Apexi VFAC mounting, all internal speakers replaced, blow job custom phone mount, etc.blow job 5K is not expensive, especially when you see the end result. I'm not saying it's cheap blow job but any good install shop would be equal if not more. blow job
Besides who else installs a freaking piece of trim and breaks out a level, blow job even for pieces that you won't even see LOL. swallow!
Originally posted by Rock Dog
Well there's alot not mentioned in that quote like (Darn wife needed $40 for the stylist, i'll get a system next month) the installation of 2 1.5 farad capacitors, (Where's my $210) cd shuttle, IVA-C800, digital eq, (Damn, Karate classes are expensive!) custom Apexi VFAC mounting, all internal speakers replaced, (Who would have known that driving your car into the side of the road costs so much) custom phone mount, etc. (Ok.... now where is that $210) 5K is not expensive, especially when you see the end result. I'm not saying it's cheap (Anyone want to buy a classic I need to sell to buy a system?) but any good install shop would be equal if not more. (More dog food? Damn, no money again!) Besides who else installs a freaking piece of trim and breaks out a level, (OK.. WHERE THE FUCK IS MY $210) even for pieces that you won't even see LOL. (Stick that in your pipe and smoke it detroit boy!)!
[/B][/QUOTE]
all i gotta say is get in a plane, fly up here, and we'll sort it out in the parking lot
[/B][/QUOTE]all i gotta say is get in a plane, fly up here, and we'll sort it out in the parking lot
Thread
Thread Starter
Forum
Replies
Last Post
4drviper
3G TL Audio, Bluetooth, Electronics & Navigation
1
Apr 23, 2025 07:13 PM
rp_guy
Member Cars for Sale
9
Jul 16, 2017 07:33 AM
justin.w13.walker
Car Parts for Sale
0
Sep 22, 2015 02:21 PM








thats some cool looking stuff...keep up the good work Ron.



