Comptech Axleback really adding hp
#1
National Champs GO GATORS
Thread Starter
Join Date: May 2004
Location: MA
Age: 42
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
Comptech Axleback really adding hp
Hey,
I've had the CLS for a little under a year, and I have been looking into exhaust for it. I hear everyone talking about the comptech exhaust. I understand that if you go from the catback you can gain some hp, but are just the axleback mufflers really going to do anything for you, except add noise?? I tried looking on the FAQ section, but no luck. Let me know, I can't see spending that much on just mufflers. Thx.
I've had the CLS for a little under a year, and I have been looking into exhaust for it. I hear everyone talking about the comptech exhaust. I understand that if you go from the catback you can gain some hp, but are just the axleback mufflers really going to do anything for you, except add noise?? I tried looking on the FAQ section, but no luck. Let me know, I can't see spending that much on just mufflers. Thx.
#4
Advanced
Join Date: Jan 2005
Location: Ewa Beach, Hawaii
Age: 49
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
Its all in your head, Don't waste your money on headers, intake, exhaust. Save your money and get a Supercharger or more preferbly a custom turbo. Do the big shit first, you'll understand why in the end.
#5
Suzuka Master
Join Date: Apr 2002
Location: Pittsburgh, PA
Age: 48
Posts: 9,940
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 01_CL-S_COUPE
Its all in your head, Don't waste your money on headers, intake, exhaust. Save your money and get a Supercharger or more preferbly a custom turbo. Do the big shit first, you'll understand why in the end.
![what](https://acurazine.com/forums/images/smilies/what.gif)
Headers are the best bang for the buck. and if Standout ever decides to get a Supercharger the open exhaust is a good idea... the stock exhaust flows pretty well.. but the theory behind Forced induction (Supercharger/TURBO) is jamming more air in and getting it out as quick as possible... so the open flow is better for later on down road if Standout wishes to get the charger/turbo..
Yes the Comptech exhausts are louder and have a growl to them, but they also have a drone to them when cruising at 60 MPH in upper gear.
I love mine.
#6
Instructor
Join Date: Dec 2003
Location: cerritos, CA
Posts: 235
Likes: 0
Received 0 Likes
on
0 Posts
check out the greddy evo. they all give similar gains. the greddys are not that loud but has a nice deep tone and its cheaper. but if u want the more conservative look i guess comptech or apexi might be the way to go since greddy evo's have huge ass looking rocket launchers.
#7
Senior Moderator
I had the full comptech catback and it was too loud for my taste so I left the b-pipe on and put the stock mufflers on and it's perfect for me...
Comptech Axle Back Group Buy
Comptech Axle Back Group Buy
Trending Topics
#8
Sold but not Forgotten...
Join Date: Jan 2004
Location: Mississauga, ON
Posts: 1,557
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by oneilc
Is the additional sound that noticable? I would like to make my car have more of a growl instead of being super quiet.
Originally Posted by 01_CL-S_COUPE
Its all in your head, Don't waste your money on headers, intake, exhaust. Save your money and get a Supercharger or more preferbly a custom turbo. Do the big shit first, you'll understand why in the end.
I really dont know where you got your info on headers, intake and exhaust being a waste....
headers = 28-30 whp (one of the best mods for the bucks)
intake = 10-12 hp
axleback = 2-3 hp
catback= 5 hp
Yes the SC and turbo application give more power but you need to have the standard application before I would jump directly to them... Catback Exhaust will help the car breathe better, and no headers.. come on...
just my
![2 Cents](https://acurazine.com/forums/images/smilies/2cents.gif)
#10
Suzuka Master
Join Date: Apr 2002
Location: Pittsburgh, PA
Age: 48
Posts: 9,940
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Jonesi
I had the full comptech catback and it was too loud for my taste so I left the b-pipe on and put the stock mufflers on and it's perfect for me...
Jonesi wants a sleeper...
Standout, I will take some pictures of my set-up tomorrow... show you what I did to the B-pipe... it blinds people at night...
#11
Sold but not Forgotten...
Join Date: Jan 2004
Location: Mississauga, ON
Posts: 1,557
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by tryingtojustify
whats the deal with the HKS exhaust on REKLESART's CL-s is that full exh. or just hi-power mufflers from hks? also, are there any clips of greddy evo on cl-s? thx.
If you seen the clip with mattg car, its got the greddy exhaust... mrsteve did a video clip in which i believe the intro was with mattg car...
for those with exhaust questions here are some previous post which helped me decide...
http://www.acura-cl.com/forums/showt...3&page=3&pp=25
https://acurazine.com/forums/showthr...ght=mattg+evo2
Good luck eh.. and once my other toys are installed this weekend, will be posting pics as well...
#14
National Champs GO GATORS
Thread Starter
Join Date: May 2004
Location: MA
Age: 42
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
Thx guys for all the info, I appreciate it. I used to have 97 Max with the Stillen muffler and intake and loved how it sounded. I have the AEM cold air on the CLS now, so I think the next mod is to do the exhaust. HP gain will be minimal, but it should sound sweet. Thx again.
#15
Sold but not Forgotten...
Join Date: Jan 2004
Location: Mississauga, ON
Posts: 1,557
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Smitty
Jonesi wants a sleeper...
Standout, I will take some pictures of my set-up tomorrow... show you what I did to the B-pipe... it blinds people at night...
Standout, I will take some pictures of my set-up tomorrow... show you what I did to the B-pipe... it blinds people at night...
Smitty you got me guessing on what you have done... awaiting your pics...
Originally Posted by darrinb
no need to go with the b pipe unless u are running f/i, i just got the mufflers and i love em...i clean em up more than i do my car
#16
Burning Brakes
Join Date: May 2001
Location: Park Ridge, IL 60068
Age: 72
Posts: 1,005
Likes: 0
Received 0 Likes
on
0 Posts
Dynoed mufflers 4 HP dynoed b-pipe 3. HP 3.8 torque but when you do headers and in take it add up to HP 43 torque 10.02 dynoed I am having my car dynoed today after thermoblock will be installed.
I stated at 194.2 HP and 185.7 torque waned up at 237.1 Hp 195.9 Torque now lets see whats next
I stated at 194.2 HP and 185.7 torque waned up at 237.1 Hp 195.9 Torque now lets see whats next
#17
National Champs GO GATORS
Thread Starter
Join Date: May 2004
Location: MA
Age: 42
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
Johntypes, what mufflers do you have..comptech?? The way I see it, mufflers are mufflers whether it says comptech or no name. Catback systems are different, since you are changing all the pipes to allow better air flow. By the time it reaches the mufflers, its already on the way out.
#19
Senior Moderator
Originally Posted by Smitty
Jonesi wants a sleeper...
Standout, I will take some pictures of my set-up tomorrow... show you what I did to the B-pipe... it blinds people at night...
Standout, I will take some pictures of my set-up tomorrow... show you what I did to the B-pipe... it blinds people at night...
I can verify this.. His B-Pipe shines like
![Mantis](https://acurazine.com/forums/images/smilies/mantis.gif)
![Mantis](https://acurazine.com/forums/images/smilies/mantis.gif)
![Mantis](https://acurazine.com/forums/images/smilies/mantis.gif)
#20
Advanced
Join Date: Jan 2005
Location: Ewa Beach, Hawaii
Age: 49
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
My point is this, It sounds like he is just starting out. We have all been there before. We've bought mod after mod trying to get a little more horsepower. But after all was done we were halfway to a turbo/ supercharger. Especially for that Comptech stuff What is it a 1k for headers,1k for exhaust and 200+ for the Ice Box. He might as well save up and get that Comptech SC. A SC CL-S will beat an I/H/E EVERYTIME.
#22
Drifting
I have the axelbacks too, and love the sound, its basically all on the low rpm range where you hear it. sounds really good in an enclosed area. I love hearing it when i take it to the dealer and they start it up inside the service area. It has a real bass to it, so its not necessarily loud, but it travels. much better than the high pitched exhausts i hear everyday.
#25
Suzuka Master
Join Date: Apr 2002
Location: Pittsburgh, PA
Age: 48
Posts: 9,940
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by mrsteve
Smitty's car = cleanest car on AcuraZINE. PERIOD.
![Too Cool](https://acurazine.com/forums/images/smilies/toocool.gif)
![Too Cool](https://acurazine.com/forums/images/smilies/toocool.gif)
she will be getting her baking soda and high pressure steam cleaning treatment to the underbody next week..
![Woot](https://acurazine.com/forums/images/smilies/woot.gif)
#26
Senior Moderator
Originally Posted by mrsteve
Smitty's car = cleanest car on AcuraZINE. PERIOD.
![Too Cool](https://acurazine.com/forums/images/smilies/toocool.gif)
![Too Cool](https://acurazine.com/forums/images/smilies/toocool.gif)
There is a Group Buy that just opened for the Axle Backs...
Comptech Axle Back Exhaust Group Buy
#29
Do not believe the "hype" put out by the manufacturers of after market mufflers, etc. The only true test is to dyno before and after installations. I am not certain of the impact on hp and torque with the rather small cube Acura V6, but on my 350 cube V8's the difference
made by going to a 3" cat back exhaust was an increase in 1/4 trap mph: one car gained 3 mph and the other 2 mph. Headers helped with low end torque with the iron block V8 going up to 485 ft lbs. Headers do make a certain amount of internal noise now just as they
did back in the early days of muscle cars. It is just the exhaust gases rushing to get past the twists and turns of the header metal, which is usually much thinner than an oem exhaust manifold.
made by going to a 3" cat back exhaust was an increase in 1/4 trap mph: one car gained 3 mph and the other 2 mph. Headers helped with low end torque with the iron block V8 going up to 485 ft lbs. Headers do make a certain amount of internal noise now just as they
did back in the early days of muscle cars. It is just the exhaust gases rushing to get past the twists and turns of the header metal, which is usually much thinner than an oem exhaust manifold.
#33
Suzuka Master
Join Date: Apr 2002
Location: Pittsburgh, PA
Age: 48
Posts: 9,940
Likes: 0
Received 0 Likes
on
0 Posts
I wet sanded the stainless B-pipe before I installed it...
then the mufflers inthis thread were Jonesi's..
https://acurazine.com/forums/showthread.php?t=140191
.. he then took them back, and I bought brand new CT exhausts... but I did not wet sand the new mufflers.. I just polished the hell out of them with my dremel tool and bom's away.
then the mufflers inthis thread were Jonesi's..
https://acurazine.com/forums/showthread.php?t=140191
.. he then took them back, and I bought brand new CT exhausts... but I did not wet sand the new mufflers.. I just polished the hell out of them with my dremel tool and bom's away.
#34
Instructor
Join Date: Dec 2003
Location: cerritos, CA
Posts: 235
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by KXM
Do not believe the "hype" put out by the manufacturers of after market mufflers, etc. The only true test is to dyno before and after installations. I am not certain of the impact on hp and torque with the rather small cube Acura V6, but on my 350 cube V8's the difference
made by going to a 3" cat back exhaust was an increase in 1/4 trap mph: one car gained 3 mph and the other 2 mph. Headers helped with low end torque with the iron block V8 going up to 485 ft lbs. Headers do make a certain amount of internal noise now just as they
did back in the early days of muscle cars. It is just the exhaust gases rushing to get past the twists and turns of the header metal, which is usually much thinner than an oem exhaust manifold.
made by going to a 3" cat back exhaust was an increase in 1/4 trap mph: one car gained 3 mph and the other 2 mph. Headers helped with low end torque with the iron block V8 going up to 485 ft lbs. Headers do make a certain amount of internal noise now just as they
did back in the early days of muscle cars. It is just the exhaust gases rushing to get past the twists and turns of the header metal, which is usually much thinner than an oem exhaust manifold.
#35
koolmonkey i am not sure about your statement about 4 bangers vs 8 cyl. with respect to air flow. I think its the other way around, these v8 are really restricted, and exhaust will add like 15-25 hp to a mustang.
#36
Team Owner
iTrader: (1)
Join Date: May 2003
Location: Leesburg, Virginia
Age: 41
Posts: 36,474
Received 249 Likes
on
175 Posts
Originally Posted by koolmonkey999
The gains from any mods on a v8 or v6 engines will be different. From my understanding it seems like the smaller your engine is (such as 4 cylinders), the more hp you get from I/H/E as opposed to 8 cylinders since they are relatively free flowing already.
Other way around. Mustangs, etc will pick up 15-20 horsepower by just swaping exhaust. An RSX-S might gain 4-5 horsepower.
#37
It is generally true that big V8's and some V6's may benefit from freerer flowing exhausts,
it is also most unusal to pick up hp gains of 15 to 20 or more! That is the makers hype! Also, "seat of the pants" trials are hardly a way to determine if an actual hp increase has taken place with a set of headers, or more open exhaust. I have experienced this seat of the pants thing and now honesly believe a lot of it is "in the head". In other words, you want to beleive what the mfg states, a 25 hp gain, etc! Great for bench racing though. Additional "sound" hardly translates to more power, other than perhaps 3 or 4 hp, and that is barely noticable unless you dyno before and after.
it is also most unusal to pick up hp gains of 15 to 20 or more! That is the makers hype! Also, "seat of the pants" trials are hardly a way to determine if an actual hp increase has taken place with a set of headers, or more open exhaust. I have experienced this seat of the pants thing and now honesly believe a lot of it is "in the head". In other words, you want to beleive what the mfg states, a 25 hp gain, etc! Great for bench racing though. Additional "sound" hardly translates to more power, other than perhaps 3 or 4 hp, and that is barely noticable unless you dyno before and after.
#38
Adventurist.
Originally Posted by 01_CL-S_COUPE
My point is this, It sounds like he is just starting out. We have all been there before. We've bought mod after mod trying to get a little more horsepower. But after all was done we were halfway to a turbo/ supercharger. Especially for that Comptech stuff What is it a 1k for headers,1k for exhaust and 200+ for the Ice Box. He might as well save up and get that Comptech SC. A SC CL-S will beat an I/H/E EVERYTIME.
#39
Team Owner
iTrader: (1)
Join Date: May 2003
Location: Leesburg, Virginia
Age: 41
Posts: 36,474
Received 249 Likes
on
175 Posts
Originally Posted by NiteQwill
Yea, but the point is, I/H/E allows for greater use of the S/C. Why not put these parts on in the meantime to get the power out of the engine anyway?
![Agree](https://acurazine.com/forums/images/smilies/agree.gif)
You'll totally choke things up w/o at least headers on the car if you do the S/C'er.
I've run against an automatic S/C'ed CL-S with stock exhaust at the track and my MPH is consistantly 2-3 MPH faster than him. He also was running 17" SSRs (13lbs each) and was getting better 60' times than me. I'm on stock wheels and my car is noticably faster with the cat-back exhaust.