Does anyone have aftermarket alarm system on their CL? and Does it cause problems with the memory for the side mirrors?

 

I have a Viper 550 installed. I have no problems with it. However it does not set the mem1 position when I unlock it. That is a factory alarm option only. There's no way to get it to work that way with the viper remotes.

 

i have the clifford intelliguard 7000 and i havent had problems with the side mirror memory but as JasonT said the seat doesnt go to the memory setting when unlocked

 

The DEI Viper 800ESP Can.

Viper 800 ESP
Two 4-button transmitters
Super High Frequency (SHF)
ESP Transmitter Code Linking
Custom configure memory seats and mirrors
7 Receiver Channels
Built-in Power Door Locks
Parking Light Flash
Built-in Domelight Supervision
Power Trunk/Channel 2
8 Zones

 

Either that, or you can add as many shock sensors as you want to your factory alarm.

 

JasonT...how is your alarm installed? is the 550 seperate from the factory or are they intergrated?

 

The viper has a factory disarm wire that turns off the factory alarm, when the viper is armed/disarmed. They are seprate but the viper takes priority.

 

Thanks JasonT...I was having problems with my mirrors and Acura said it was cuz of my Viper Alarm...so i guess thats a bunch of bull

 

I have aftermarket alarm as well and the mirrors & seat memory works fine (of course, it cannot be controlled by the aftermarket alarm's remote). There must be something wrong with your car.