999$ for Comptech Headers (Again)
#1
999$ for Comptech Headers (Again)
Diamond Bar Honda is offering me 999 dollars for the header.
which for some of you thought it's a great deal.
but too bad I don't have any money right now, I'm actually on dept of 1,500 dollars for my credit cards.
and YES, Diamond Bar Honda does sales 1st Gen CL products too. springs, AEM CAI, etc.
if you guys are interested, we can probably all go together and might even get a better deal ?
which for some of you thought it's a great deal.
but too bad I don't have any money right now, I'm actually on dept of 1,500 dollars for my credit cards.
and YES, Diamond Bar Honda does sales 1st Gen CL products too. springs, AEM CAI, etc.
if you guys are interested, we can probably all go together and might even get a better deal ?
#2
www.autocarparts.com
------------------
2001 Acura 3.2 CL Type-S
San Marino Red/Ebony/Navi/Spoiler/Nose Mask/Mud Guards/Wheel locks/
Comptech Springs & Filter/PIAA 1969/20% Tint/Acura lettering removed/
12in Sub with AMP/Dynomated Trunk/Sub control under dash/
Clifford G4 Solaris Alarm
------------------
2001 Acura 3.2 CL Type-S
San Marino Red/Ebony/Navi/Spoiler/Nose Mask/Mud Guards/Wheel locks/
Comptech Springs & Filter/PIAA 1969/20% Tint/Acura lettering removed/
12in Sub with AMP/Dynomated Trunk/Sub control under dash/
Clifford G4 Solaris Alarm
#3
Yeah webtoker I think he was going to go with Tim, but something like this dealer was giving him 999 for headers and 90 for the install! THAT IS AWESOME! hehe...
------------------
Tw1112
CL 3.0 '98 - Cleared bumper, hiper/piaa bulbs all around, PIAA 1700x fogs, and AEM CAI.
------------------
Tw1112
CL 3.0 '98 - Cleared bumper, hiper/piaa bulbs all around, PIAA 1700x fogs, and AEM CAI.
#4
Dealer Invoice Price for Comptech Headers is $850. So $150 a shot is not that bad as net profit if all what the dealer does is just place the order!
Oh, they will skin you to death if you get them installed, my local dealer quoted me $280!. I think any qualified mech should get those in less than 2 hrs!
So $100 is reasonalble but $280 is too much.
------------------
Bare Bone Stock Type-S. Plenty of accessories.
Oh, they will skin you to death if you get them installed, my local dealer quoted me $280!. I think any qualified mech should get those in less than 2 hrs!
So $100 is reasonalble but $280 is too much.
------------------
Bare Bone Stock Type-S. Plenty of accessories.
#5
i'm in it.
if you are serious about purchasing headers, i'll go with you to get a group discount.
let's aim for $1000, INSTALLED. we can squeeze him.
if there is ANYONE else, please be involved. the chances of getting the headers at a lower cost will be higher.
rurofan: when are you planning to get them? i want them asap. email me if you're serious about getting them.
if you are serious about purchasing headers, i'll go with you to get a group discount.
let's aim for $1000, INSTALLED. we can squeeze him.
if there is ANYONE else, please be involved. the chances of getting the headers at a lower cost will be higher.
rurofan: when are you planning to get them? i want them asap. email me if you're serious about getting them.
#6
<font face="Verdana, Arial" size="2">Originally posted by so cal type s:
i'm in it.
if you are serious about purchasing headers, i'll go with you to get a group discount.
let's aim for $1000, INSTALLED. we can squeeze him.
if there is ANYONE else, please be involved. the chances of getting the headers at a lower cost will be higher.
rurofan: when are you planning to get them? i want them asap. email me if you're serious about getting them.
</font>
i'm in it.
if you are serious about purchasing headers, i'll go with you to get a group discount.
let's aim for $1000, INSTALLED. we can squeeze him.
if there is ANYONE else, please be involved. the chances of getting the headers at a lower cost will be higher.
rurofan: when are you planning to get them? i want them asap. email me if you're serious about getting them.
</font>
Sooner the better.
I also want some sways.
#7
<font face="Verdana, Arial" size="2">Originally posted by Water Rabbit:
I'm interested.
Sooner the better.
I also want some sways.
</font>
I'm interested.
Sooner the better.
I also want some sways.
</font>
rurofan: who did you talk to? thanks.
Trending Topics
#8
<font face="Verdana, Arial" size="2">Originally posted by so cal type s:
want to aim for next friday? 1/19? we should talk to the same person rurofan talked to, if not, then directly to the parts and service manager.
.</font>
want to aim for next friday? 1/19? we should talk to the same person rurofan talked to, if not, then directly to the parts and service manager.
.</font>
#9
<font face="Verdana, Arial" size="2">Originally posted by so cal type s:
[B] want to aim for next friday? 1/19? . . .B]</font>
[B] want to aim for next friday? 1/19? . . .B]</font>
#10
I think Friday the 19th will do, it's next week right ? but what time ?
I was talking to the guy named Robert, he's the one who quoted me on the header. While we're there, I'll let you guys do the talking, okay ?
So how about Type-S Girl, isn't she interested too ? and the PDG Type-S guy from AZ, is he coming too ?
I was talking to the guy named Robert, he's the one who quoted me on the header. While we're there, I'll let you guys do the talking, okay ?
So how about Type-S Girl, isn't she interested too ? and the PDG Type-S guy from AZ, is he coming too ?
#11
Don't forget tax guys. If you order them from Autocarparts.com there is no tax.
------------------
2001 Acura 3.2 CL Type-S
San Marino Red/Ebony/Navi/Spoiler/Nose Mask/Mud Guards/Wheel locks/
Comptech Springs & Filter/PIAA 1969/20% Tint/Acura lettering removed/
12in Sub with AMP/Dynomated Trunk/Sub control under dash/
Clifford G4 Solaris Alarm
------------------
2001 Acura 3.2 CL Type-S
San Marino Red/Ebony/Navi/Spoiler/Nose Mask/Mud Guards/Wheel locks/
Comptech Springs & Filter/PIAA 1969/20% Tint/Acura lettering removed/
12in Sub with AMP/Dynomated Trunk/Sub control under dash/
Clifford G4 Solaris Alarm
#14
Hmm...thats right....would it matter that Honda is installing instead of Acura? I would be down too, wish I could, but no money! I think the total will be around 1175 with tax? Not sure though, so be ready....where is this dealer located again? Maybe I will just venture on over to take a look.
------------------
Tw1112
CL 3.0 '98 - Cleared bumper, hiper/piaa bulbs all around, PIAA 1700x fogs, and AEM CAI.
------------------
Tw1112
CL 3.0 '98 - Cleared bumper, hiper/piaa bulbs all around, PIAA 1700x fogs, and AEM CAI.
#15
<font face="Verdana, Arial" size="2">Originally posted by tw1112:
Hmm...thats right....would it matter that Honda is installing instead of Acura? I would be down too, wish I could, but no money! I think the total will be around 1175 with tax? Not sure though, so be ready....where is this dealer located again? Maybe I will just venture on over to take a look.
</font>
Hmm...thats right....would it matter that Honda is installing instead of Acura? I would be down too, wish I could, but no money! I think the total will be around 1175 with tax? Not sure though, so be ready....where is this dealer located again? Maybe I will just venture on over to take a look.
</font>
those that are serious about purchasing or have any questions, email me.
#16
<font face="Verdana, Arial" size="2">Originally posted by WebToker:
Don't forget tax guys. If you order them from Autocarparts.com there is no tax.
</font>
Don't forget tax guys. If you order them from Autocarparts.com there is no tax.
</font>
this is assuming myself, water rabbit, rurofan, bodizafa, and tw1112 will be purchasing & installing headers. am i correct? also, if you'd like to install and purchase other items for your car, you might want to do it at this time.
i'd say we do it early in the morning, 9AM. that way, if they have the parts, they can be installed by the end of the day. rurofan, do they still have to order the parts or do they have them at the dealership?
again, warranty will not be a problem.
[This message has been edited by so cal type s (edited 01-11-2001).]
#17
i'm actually going to link snook to this thread.
if he's able to beat or match the price, that would be great. i think $1000 installed is very reasonable.
also, i was reading some threads, and i realized some of you don't have a '01 CL. can you guys list what year and parts you want? this way, when we're at the dealership, we can be prepared and ready to negotiate.
so cal type s: '01, headers.
[This message has been edited by so cal type s (edited 01-11-2001).]
if he's able to beat or match the price, that would be great. i think $1000 installed is very reasonable.
also, i was reading some threads, and i realized some of you don't have a '01 CL. can you guys list what year and parts you want? this way, when we're at the dealership, we can be prepared and ready to negotiate.
so cal type s: '01, headers.
[This message has been edited by so cal type s (edited 01-11-2001).]
#18
If I do go...
CL 3.0 '98
Not sure if it is worth it for me..
------------------
Tw1112
CL 3.0 '98 - Cleared bumper, hiper/piaa bulbs all around, PIAA 1700x fogs, and AEM CAI.
CL 3.0 '98
Not sure if it is worth it for me..
------------------
Tw1112
CL 3.0 '98 - Cleared bumper, hiper/piaa bulbs all around, PIAA 1700x fogs, and AEM CAI.
#19
They don't have the headers in stock, but I guess we can order them and pay for them on Friday, then install them later on. that way it wouldn't effect our prices. right ?
I'm down for 9AM in the morning !
I'm down for 9AM in the morning !
#20
Hey Rurofan, you wouldn't by any chance know how much they are charging for the 1st gen CL headers would you?? I know the CL-S headers are more expensive, so they wouldn't charge me the same would they?
------------------
Tw1112
CL 3.0 '98 - Cleared bumper, hiper/piaa bulbs all around, PIAA 1700x fogs, and AEM CAI.
------------------
Tw1112
CL 3.0 '98 - Cleared bumper, hiper/piaa bulbs all around, PIAA 1700x fogs, and AEM CAI.
#21
To : TW1112
I don't think they would, it's two different headers for two different cars.
To : So.Cal Type-S
Alright, let's do it. *sigh* although I'm really close to file my bankruptcy though.
[This message has been edited by rurofan (edited 01-12-2001).]
I don't think they would, it's two different headers for two different cars.
To : So.Cal Type-S
Alright, let's do it. *sigh* although I'm really close to file my bankruptcy though.
[This message has been edited by rurofan (edited 01-12-2001).]
#22
<font face="Verdana, Arial" size="2">Originally posted by rurofan:
They don't have the headers in stock, but I guess we can order them and pay for them on Friday, then install them later on. that way it wouldn't effect our prices. right ?
I'm down for 9AM in the morning ! </font>
They don't have the headers in stock, but I guess we can order them and pay for them on Friday, then install them later on. that way it wouldn't effect our prices. right ?
I'm down for 9AM in the morning ! </font>
however, we could call them, negotiate, and they maybe could have the parts in by friday for the install.
i'm almost certain water rabbit, yourself (rurofan), bodizafa, and me will be purchasing headers for the '01 CL. this will be a total of 4.
!!! please be certain you will purchase the headers !!!
also, please confirm this by replying to this thread.
after the confirmation(s), rurofan, can you give me the number to the dealer, i will call Robert and negotiate the price for 4 comptech headers on the '01 CL, installed.
oh, is Robert from the parts department or service department?
i already have my negotating strategy planned out.
#23
Wow SoCal Type S! You can't wait to get the headers can you??? hehehe..Good luck...if you can, can you do me a favor and ask about the 3.0 '98 CL headers? Thanks so much!!
------------------
Tw1112
CL 3.0 '98 - Cleared bumper, hiper/piaa bulbs all around, PIAA 1700x fogs, and AEM CAI.
------------------
Tw1112
CL 3.0 '98 - Cleared bumper, hiper/piaa bulbs all around, PIAA 1700x fogs, and AEM CAI.
#24
<font face="Verdana, Arial" size="2">Originally posted by tw1112:
Wow SoCal Type S! You can't wait to get the headers can you??? hehehe..Good luck...if you can, can you do me a favor and ask about the 3.0 '98 CL headers? Thanks so much!!
</font>
Wow SoCal Type S! You can't wait to get the headers can you??? hehehe..Good luck...if you can, can you do me a favor and ask about the 3.0 '98 CL headers? Thanks so much!!
</font>
sure i'll ask. no problemo.
#25
I'm game for what ever we need to do on Friday.
I'm comfortable with the objective price and with So Cal CL-S being our lead negotiator.
9:00 AM is painful but not impossible - I'll be coming from Redondo Beach that morning.
I'd like to be satisfied that the installion will be professionally done, but I'm not a mechanic so unless one of you is, I'll be going on vibes.
So, barring piss-me-off, nasty dealer surprises or a feeling of dread about incompetants wrecking my car . . . I'm in.
So Cal, I responded to your Pvt message and tried emailing you again, earlier. The email came back again, so try the address in my Pvt message and I'll reply that way.
I'm comfortable with the objective price and with So Cal CL-S being our lead negotiator.
9:00 AM is painful but not impossible - I'll be coming from Redondo Beach that morning.
I'd like to be satisfied that the installion will be professionally done, but I'm not a mechanic so unless one of you is, I'll be going on vibes.
So, barring piss-me-off, nasty dealer surprises or a feeling of dread about incompetants wrecking my car . . . I'm in.
So Cal, I responded to your Pvt message and tried emailing you again, earlier. The email came back again, so try the address in my Pvt message and I'll reply that way.
#26
Guys i have class until 3 on fridays.. i'll be at cal poly pomona until then.. so let me know what u guys need me to do? i really can't miss class though... school is killing me bad enough.
#27
<font face="Verdana, Arial" size="2">Originally posted by Bodizafa:
Guys i have class until 3 on fridays.. i'll be at cal poly pomona until then.. so let me know what u guys need me to do? i really can't miss class though... school is killing me bad enough.</font>
Guys i have class until 3 on fridays.. i'll be at cal poly pomona until then.. so let me know what u guys need me to do? i really can't miss class though... school is killing me bad enough.</font>
#29
<font face="Verdana, Arial" size="2">Originally posted by CL SLeePeR:
Is there a difference between the headers for the 1st gen. CL and the 2nd gen. CL's?? I thought they were the same.?</font>
Is there a difference between the headers for the 1st gen. CL and the 2nd gen. CL's?? I thought they were the same.?</font>
http://www.comptechusa.com/vehicles/acura/index.html
#30
<font face="Verdana, Arial" size="2">Originally posted by Bodizafa:
Guys i have class until 3 on fridays.. i'll be at cal poly pomona until then.. so let me know what u guys need me to do? i really can't miss class though... school is killing me bad enough.</font>
Guys i have class until 3 on fridays.. i'll be at cal poly pomona until then.. so let me know what u guys need me to do? i really can't miss class though... school is killing me bad enough.</font>
i'm waiting for snooks response to this thread, maybe he can give us a better deal.
if not, MONDAY, i'll call the dealer, tell them our situation. that way, those like water rabbit and yourself do not have to drive to the dealer, when it can all be done over the phone. i would do it tomorrow, on friday, but i want to make sure everyone is settled, and there might be others who will want to be involved in this group buy.
or actually, i'll go there by myself on monday. negotiating in person is much better than on the phone. i pass DB all the time, i just need directions. so monday afternoon, i'll give you guys the details.
sorry to be so umm, leader like?! i just want to get things done!
ok there's only one a few things i need: number and directions to DB dealer. or i can just look online and stop being lazy. haha.
#31
i hope the dealer is open on monday, martin luther king's birthday.
i'll find out tomorrow.
anyone free on monday is welcome to go!!!!!
update: we have a total of 4 people purchasing headers.
those that are interested, send me your emails and #'s. .
my email is i800gq@aol.com , not a "1" but an "i".
[This message has been edited by so cal type s (edited 01-12-2001).]
i'll find out tomorrow.
anyone free on monday is welcome to go!!!!!
update: we have a total of 4 people purchasing headers.
those that are interested, send me your emails and #'s. .
my email is i800gq@aol.com , not a "1" but an "i".
[This message has been edited by so cal type s (edited 01-12-2001).]
#32
<font face="Verdana, Arial" size="2">Originally posted by Water Rabbit:
Headers are advertised for the CL-S and for 3.0 CL's 97-99. Same price -different kits.</font>
Headers are advertised for the CL-S and for 3.0 CL's 97-99. Same price -different kits.</font>
------------------
Tw1112
CL 3.0 '98 - Cleared bumper, hiper/piaa bulbs all around, PIAA 1700x fogs, and AEM CAI.
#36
Guys, make sure that they're not headers they actually kept in stock cuz they might be the 1st Gen Comptech Headers. The 1st Gen had a resonating noise problem and the 2nd Gen fixed it. So ask and check it out...good luck guys! Oh, If they can sell you the header for $999, I bet Snook can beat it! go to www.autocarparts.com
#37
<font face="Verdana, Arial" size="2">Originally posted by CL SLeePeR:
TW1112, who's Tim?
So Cal Type s, Where can we get them for cheaper?
</font>
TW1112, who's Tim?
So Cal Type s, Where can we get them for cheaper?
</font>
Above, where I said that the headers were cheaper from Tim, I meant that the 3.0 CL headers were priced at 995, while the headers from the CL-S are for 1015. Not that big of a diff, but then that way I can support Tim's biz...hehe I can save 4 whole dollars!!
------------------
Tw1112
CL 3.0 '98 - Cleared bumper, hiper/piaa bulbs all around, PIAA 1700x fogs, and AEM CAI.
#38
Oh thanks for the info.TW1112. I'll check out his site.
Does anyone know what, exactly is the difference between the headers for the older CL and the Type-s?
[This message has been edited by CL SLeePeR (edited 01-12-2001).]
Does anyone know what, exactly is the difference between the headers for the older CL and the Type-s?
[This message has been edited by CL SLeePeR (edited 01-12-2001).]
#39
<font face="Verdana, Arial" size="2">Originally posted by AC:
Guys, make sure that they're not headers they actually kept in stock cuz they might be the 1st Gen Comptech Headers. The 1st Gen had a resonating noise problem and the 2nd Gen fixed it. So ask and check it out...good luck guys! Oh, If they can sell you the header for $999, I bet Snook can beat it! go to www.autocarparts.com</font>
Guys, make sure that they're not headers they actually kept in stock cuz they might be the 1st Gen Comptech Headers. The 1st Gen had a resonating noise problem and the 2nd Gen fixed it. So ask and check it out...good luck guys! Oh, If they can sell you the header for $999, I bet Snook can beat it! go to www.autocarparts.com</font>
#40
just wanna bring this topic back up !
has everybody already forgotten about this ?
we're gonna do this right ?
just wait 'till tomorrow for Rick to give us the exact info on our headers.
after this we can arrange another meet for us to go to the track or something to test our times for 0 ~ 60.
------------------
2001 Acura CL Type-S. Blk/Blk w/Navi, Spoiler, PIAA Platinum Series Super White High Beams, PIAA 19169 Platinum Super White Wedge Bulbs, 20% / 5% tints.
So far four door dings, two on each side, DVD Navigation System Unit replaced, Both Driver and Passenger side seat back fell off, Metal piece inside of the wiper came out, planning to replace both wipers and wind shield next week.
[This message has been edited by rurofan (edited 01-15-2001).]
has everybody already forgotten about this ?
we're gonna do this right ?
just wait 'till tomorrow for Rick to give us the exact info on our headers.
after this we can arrange another meet for us to go to the track or something to test our times for 0 ~ 60.
------------------
2001 Acura CL Type-S. Blk/Blk w/Navi, Spoiler, PIAA Platinum Series Super White High Beams, PIAA 19169 Platinum Super White Wedge Bulbs, 20% / 5% tints.
So far four door dings, two on each side, DVD Navigation System Unit replaced, Both Driver and Passenger side seat back fell off, Metal piece inside of the wiper came out, planning to replace both wipers and wind shield next week.
[This message has been edited by rurofan (edited 01-15-2001).]