TSX GT3076R built! update from last year!
#1
TSX GT3076R built! update from last year!
Pictures and list of part scroll down!
I will start with my video on youtube. This is my dyno pull when I did my highest HP last year with my t04e turbo.
Im asking if you can click on the bannner under the video when it pop up at the middle of the pull. It doesnt cost you nothing to do it, it take couple second of your time, and help me out! Just close it after if the pub doesnt interest you!
VIDEO OF MY TURBO TSX ON THE DYNO! CLICK HERE
Aight time for infos of my project:
04-02-2009
last numbers for now: 296whp and 289wtq @ 10psi
- custom AEC fabs intercooler
- custom AEC fabs 2.5¨aluminium piping
- HKS SSQV BOV
- Tial 38mm wastegate
- RC 750cc injectors
- JVT K serie top mount cast manifold
- autometer boost gauge and oil pressure gauge
- Hondata dual ECU setup with harness and kpro
- Turbo Expert T04E Turbo .50 A/R Compressor, .63A/R Turbine
- 3¨ custom AEC fabs downpipe with v-band made by us...
- Bully stage 3 clutch kit
I know the car is damn dirty....
Couple lapping shots:
25-05-2010
- CP forge piston
- Eagle H-Beam Rod
- ARP headstuds
- Complet head rebuilt
- custom VTC camgear
- Walbro 255 fuel pump
- Garrett GT3076R .63 Hot side.
MORE PICTURES TO COME SOON!!!
I will start with my video on youtube. This is my dyno pull when I did my highest HP last year with my t04e turbo.
Im asking if you can click on the bannner under the video when it pop up at the middle of the pull. It doesnt cost you nothing to do it, it take couple second of your time, and help me out! Just close it after if the pub doesnt interest you!
VIDEO OF MY TURBO TSX ON THE DYNO! CLICK HERE
Aight time for infos of my project:
04-02-2009
last numbers for now: 296whp and 289wtq @ 10psi
- custom AEC fabs intercooler
- custom AEC fabs 2.5¨aluminium piping
- HKS SSQV BOV
- Tial 38mm wastegate
- RC 750cc injectors
- JVT K serie top mount cast manifold
- autometer boost gauge and oil pressure gauge
- Hondata dual ECU setup with harness and kpro
- Turbo Expert T04E Turbo .50 A/R Compressor, .63A/R Turbine
- 3¨ custom AEC fabs downpipe with v-band made by us...
- Bully stage 3 clutch kit
I know the car is damn dirty....
Couple lapping shots:
25-05-2010
- CP forge piston
- Eagle H-Beam Rod
- ARP headstuds
- Complet head rebuilt
- custom VTC camgear
- Walbro 255 fuel pump
- Garrett GT3076R .63 Hot side.
MORE PICTURES TO COME SOON!!!
Trending Topics
#13
I've been trying to.get a hold of some TLS rims for a while now...whered u get ures and what offset did.u.have on it...and I'm thinking bout getting a procharger for my tsx...I won't need to change my internal if I just wanna run 10 psi do I?
#14
The wheels is on the car when i purshase it.
For F/I a good tuner is the secret. If you run with a intercooler it should be ok. For the internal it should be ok, someone tell they tuned it @ 15psi stock, but me i'm not safe with that.
Thread
Thread Starter
Forum
Replies
Last Post
cycdaniel
1G TSX Performance Parts & Modifications
8
12-17-2019 10:58 AM
ExcelerateRep
4G TL Performance Parts & Modifications
8
12-11-2015 12:58 PM
DiamondJoeQuimby
Car Parts for Sale
1
09-10-2015 11:40 AM