04/06 Front end swap is possible
#126
back from the dead
I attempted to swap my 06 with a fellow member's 04 bumper and everything looked to fit just fine until we started bolting everything up. I ended up finding out that the 04-05 wheel well splash guards are wider than the 06 (or vice versa). Has anyone actually swapped and experienced what i'm talking about?
#129
Senior Moderator
There's no way the wheel well liners have changed materially. The dimensions of all the outers are the same. Just make sure you've got it lined up and are re-installing correctly!
#131
Im thinking about getting a pair of 04-05 JDM headlights for my 06 TSX. According to what Ive read in this thread they will fit, but has anybody actually done this yet?
I thought I remember reading somewhere that I would have to get 04-05 ballasts in order to install the 04-05 JDM headlights on my 06, cany anybody confirm this?
I thought I remember reading somewhere that I would have to get 04-05 ballasts in order to install the 04-05 JDM headlights on my 06, cany anybody confirm this?
#132
Originally Posted by inkedup
Im thinking about getting a pair of 04-05 JDM headlights for my 06 TSX. According to what Ive read in this thread they will fit, but has anybody actually done this yet?
I thought I remember reading somewhere that I would have to get 04-05 ballasts in order to install the 04-05 JDM headlights on my 06, cany anybody confirm this?
I thought I remember reading somewhere that I would have to get 04-05 ballasts in order to install the 04-05 JDM headlights on my 06, cany anybody confirm this?
https://acurazine.com/forums/showthr...ght=headlights
#134
Originally Posted by EuRTSX
You can fill the ballast hole with something, and get a custom mount to hold your ballast but I didn't feel like going through all that trouble.
#135
Originally Posted by integuy98
I attempted to swap my 06 with a fellow member's 04 bumper and everything looked to fit just fine until we started bolting everything up. I ended up finding out that the 04-05 wheel well splash guards are wider than the 06 (or vice versa). Has anyone actually swapped and experienced what i'm talking about?
did you figure out what the problem was? did it ended up lining up?
#136
Former Sponsor
iTrader: (1)
Originally Posted by inkedup
Im thinking about getting a pair of 04-05 JDM headlights for my 06 TSX. According to what Ive read in this thread they will fit, but has anybody actually done this yet?
I thought I remember reading somewhere that I would have to get 04-05 ballasts in order to install the 04-05 JDM headlights on my 06, cany anybody confirm this?
I thought I remember reading somewhere that I would have to get 04-05 ballasts in order to install the 04-05 JDM headlights on my 06, cany anybody confirm this?
I have a set of EDM 04-05 in stock now btw...LHD JDM headlights basically...
#137
I spend 2 much time here
Originally Posted by MrHeeltoe
I have a set of EDM 04-05 in stock now btw...LHD JDM headlights basically...
i hope Reach is reading this thread, he doubted that you had these...
#138
I didn't try again after that ordeal, but if there's people here on the forum saying it has worked, then I guess it works.
Originally Posted by iride
did you figure out what the problem was? did it ended up lining up?
#140
Originally Posted by integuy98
I didn't try again after that ordeal, but if there's people here on the forum saying it has worked, then I guess it works.
so you decided to keep the 06/07 frontend?
#145
Burning Brakes
I have the 06/07 JDM headlights on my 2004 TSX but there seems to be a very narrow gap where the headlights meet with the fender. It is minimal and not isn't that noticeable when your not staring close at it.
#149
Special-K
Where could i get an 06 OEM bumper? Im trying to put an 06 bumper on my 04 TSX and then put on the 06 mugen lip kit all the way around.. anyone know where i can purchase the OEM 06 bumper?
Thread
Thread Starter
Forum
Replies
Last Post
TLDude876
Car Talk
134
12-28-2016 03:18 PM
Oakes
Wash & Wax
10
10-12-2015 11:17 AM