After having tons of oil in my old intake manifold, old intercooler, and intake track; an oil can wouldn't hurt. Thanks for the reminder TheWrench116!

 

please do a DIY on this.. would like to see where you have the lines going =)

 

yeah I just cleaned my intercooler for the umpteenth time... gets old after the first time. might start using something to fog it with.

 

don't forget to put a check valve in line with it or it will bleed boost.

 

Didn't really take many pic for DIY. I just used the simple setup, just ran a line from the valve cover breather to catch can and drilled a hole in the PCV valve and ran that line to the catch can. I'll take some pics and post.


This is what my setup generally looks like.

 

what about the line that goes into the intake manifold.. did you just block that off?? the one that goes from the PCV to the manifold is the one im talking about

 

which # 1 or 4?? id like to know too.

 

#4 is a line in the photo it looks like...

normally #1 has a line going straight to the manifold.. so what happens to the manifold opening? you block it off I am guessing correct? or if you were to get a breather does the top breather part just go to the manifold?

 

I just ran that to my brake booster hose.

 

#1 is the PCV valve drill, #4 is the hose that goes from newly drilled PCV valve (opened) to the catch can. You don't need vacuum anymore because it's open.

 

#3

 

#2 and #4

 

#4

 

#1