ATLP Exhaust Group Buy
01-23-2012, 11:48 AM
#1
ATLP Exhaust Group Buy
Hey folks, we are revisiting this again. We got an order for a system over the weekend and in order to make them we need a few more backorders. This is a feeler post.
As far as fitment on the newer model versus the older one, we can guarantee the exhaust will fit the new rear bumper, even if we need to redesign it. Right now our main concern is getting some people together to make another production run of RDX ATLP exhausts a reality!
Questions also came up in the past about a downpipe. Another was made from another vendor and we are unaware of the success of this product. At this time we are not looking at a downpipe but a good result of this GB might change that.
Last thing I will note, there is no eta, no timeline, no speculation on this. This is a limited production part for a limited production car with limited demand for such a part. Your patience will be rewarded with a shiny new, rare ATLP exhaust system!
So let's get a list going! We need 10!
1. anonymous
2.
3.
4.
5.
6.
7.
8.
9.
10.
As far as fitment on the newer model versus the older one, we can guarantee the exhaust will fit the new rear bumper, even if we need to redesign it. Right now our main concern is getting some people together to make another production run of RDX ATLP exhausts a reality!
Questions also came up in the past about a downpipe. Another was made from another vendor and we are unaware of the success of this product. At this time we are not looking at a downpipe but a good result of this GB might change that.
Last thing I will note, there is no eta, no timeline, no speculation on this. This is a limited production part for a limited production car with limited demand for such a part. Your patience will be rewarded with a shiny new, rare ATLP exhaust system!
So let's get a list going! We need 10!
1. anonymous
2.
3.
4.
5.
6.
7.
8.
9.
10.
01-24-2012, 11:43 AM
#3
"...there is no eta, no timeline, no speculation on this..."
For me, it is difficult to offer interest because there is no price.
For me, it is difficult to offer interest because there is no price.
01-24-2012, 02:54 PM
#4
I agree, given no information at all, it is hard to commit. I am interested though. if 10 ppl were to commit what sort of timeline and estimated cost?
01-24-2012, 05:36 PM
#6
It's all coming back to me now.......
01-25-2012, 11:49 AM
#7
Trending Topics
01-25-2012, 03:38 PM
#8
I definitely would like to order one but the issue for me is timeline. New winter tires, intercooler, front lower spoiler, rear diffuser, body side molding, as well as x-mas has put a dent in my wallet.
Last edited by kidfury; 01-25-2012 at 03:45 PM.
01-31-2012, 02:57 PM
#13
1. anonymous
2. HONDA TUNING! They are going to do a feature if we get them made quick! Just found out 5 min ago.
-let me run a hypothetical scenario here...
3. kidfury
4. BigHatch
5. JCRDX11 (pending fuel is not an issue)
6. wspy (based on the fact that you were posting in the previous thread as well as this one, you must be at least somewhat interested)
7. Mr Marco (same as wspy)
We are practically halfway there! I can actually get this done with 6-7 orders. Plus we can hit back all the people who have been asking for this part in the last 6 months (at least 2-3 more there).
SERIOUSLY, with the promise of completion in the next month or so wouldn't you guys be interested in making another run a reality?
2. HONDA TUNING! They are going to do a feature if we get them made quick! Just found out 5 min ago.
-let me run a hypothetical scenario here...
3. kidfury
4. BigHatch
5. JCRDX11 (pending fuel is not an issue)
6. wspy (based on the fact that you were posting in the previous thread as well as this one, you must be at least somewhat interested)
7. Mr Marco (same as wspy)
We are practically halfway there! I can actually get this done with 6-7 orders. Plus we can hit back all the people who have been asking for this part in the last 6 months (at least 2-3 more there).
SERIOUSLY, with the promise of completion in the next month or so wouldn't you guys be interested in making another run a reality?
The following users liked this post:
BigHatch (01-31-2012)
01-31-2012, 03:19 PM
#15
I just emailed Hondata on the fuel issue:
Hope this helps!
Originally Posted by Me to Doug
Hi Doug,
I am working the RDX guys to get them into buying an exhaust I make for the car, and there are some people raising concerns about AFR being safe or not when running combinations of mods and reflashes and stuff. Do you have any comment on this? Should someone with an intake and your reflash be nervous about installing a cat back or deleting a cat?
I am working the RDX guys to get them into buying an exhaust I make for the car, and there are some people raising concerns about AFR being safe or not when running combinations of mods and reflashes and stuff. Do you have any comment on this? Should someone with an intake and your reflash be nervous about installing a cat back or deleting a cat?
Originally Posted by Doug's reply
Anything on the exhaust is fine. A freer flowing exhaust will cause more air to be drawn through the intake which the ECU will read and compensate for. I have tested this with a prototype exhaust that made +15 odd HP.
Doug
Doug
02-01-2012, 01:09 PM
#20
lol^
Very tempting. I'm in the same boat as "kidfury" as the timing is off for me. My excuse is Christmas plus a new stove in the house. If we were in the month of April I'd be all over this. But fat-n-forty over here just paid $700 to MasterCard.
Very tempting. I'm in the same boat as "kidfury" as the timing is off for me. My excuse is Christmas plus a new stove in the house. If we were in the month of April I'd be all over this. But fat-n-forty over here just paid $700 to MasterCard.
02-02-2012, 12:13 AM
#22
Well, we have another thread going for the UA5 in that section...
Well, there is always the upcoming tax season. Most people get a return...unlike me.
The tips are 4". The cutout is different but the look should be pretty similar. Maybe someone can photoshop?
The tips are 4". The cutout is different but the look should be pretty similar. Maybe someone can photoshop?
02-03-2012, 05:32 PM
#26
BTW, we can do incremental payments on these...of you want to do this in 2-3 payments, order online and checkout using the "phone payment" method. We will take card info over the phone and charge 30-50% down and then you can pay the rest when the parts are closer to shipping time.
02-08-2012, 08:16 PM
#31
Well, we have another thread going for the UA5 in that section...
Well, there is always the upcoming tax season. Most people get a return...unlike me.
Rich people normally don't get any return!
The tips are 4". The cutout is different but the look should be pretty similar. Maybe someone can photoshop?
Well, there is always the upcoming tax season. Most people get a return...unlike me.
Rich people normally don't get any return!
The tips are 4". The cutout is different but the look should be pretty similar. Maybe someone can photoshop?
Stock is already 6.5" wide and it is not even fill out.
The opening is about 8" so the 4" tips would look weird and small on the +10 models.
How much time till a deadline? ...a week to payday.
02-09-2012, 12:08 PM
#34
Yes, about 2 months I think. Trying to firm that up as I type. Once I know we will open deposit submission page.
02-10-2012, 06:12 PM
#38