20's on my cl.... Haters stay out...
#1
20's on my cl.... Haters stay out...
Ok so my cl is bagged.. I was either going to put wire or go big... I decided I wanted to go big... Seems like it's cheaper for 20" tires Than 19" so 20's seems to be the route I wanna go... I know they need to be 20x7.5 but what offset? I have searched the forum and no one has seemed to answer this question... They need to not rub on the inside and need to tuck when I lay her out...
#2
Your Girlfriend is in my
You know...seeing a couple of CLs bagged...how the hell do you guys do it, and how much does it cost for this look? I'd say that looks clean and slammed out of its mind. Lol.
- RemieGino14 -
- RemieGino14 -
#5
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
iTrader: (6)
I like the rims you're on now with the bags There was a member on here that had 20's, not sure if he posted his offsets though
#7
The upside to the 20's is that when I lay her out the transmission will be huger off the ground.. Right now u can fit a finger between the transmission and the ground. So I cracked thed trans case... So I am in the process of swa ing out the tray doing a valve job and all new seals and timing belt...
Trending Topics
#10
Yeah... What can I say, I just want dubs... It helps I work at Tire Kingdom so I get great pricing... Just want to make sure I buy the right offset... I am thinking 20x7.5 with a 40offset and a 225 30 20 tire should work.. I may cut up the inner fender to get to lay...
#11
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
iTrader: (6)
The upside to the 20's is that when I lay her out the transmission will be huger off the ground.. Right now u can fit a finger between the transmission and the ground. So I cracked thed trans case... So I am in the process of swa ing out the tray doing a valve job and all new seals and timing belt...
#12
Yeah I'm basically taking a trans case I got from the junk yard and transferring everything from my trans into it... Replacing what is needed.. But I am putting a skid plate...
#13
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
iTrader: (6)
I like the skid plate idea, I've been toying with doing something after I get my exhaust put on, post up pics if you end up doing one.
#17
#24
I live in south fla... Just waiting on my car from the tranny shop... Decided to do a full rebuild on it... I am keeping her for a while, I am going to add headrest tvs to go with the tv i have fiberglassed in the dash... Then new carpet.. I am going to orders carpet kit for a 97 accord coupe... I am thinking they change over, then I need so e weather striping and to vist dent wizards and I should be good for awhile... Oh also am gonna tint the taillights I think it would look good with the color of the car...
#27
That thing look sick, good job
#30
#31
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
iTrader: (6)
#32
#36
3.7L Nitrous Breathing CL
iTrader: (7)
Gold rims are pimp'n no matter how you slice it.
If they didn't ride like crap they would still be on.
Far from stock. Got so many mods it will not fit in my sig and besides ,low key is the way to be.
Don't need no theifs trying to jack the whip.
So ya it's bone stock.
Probablly about to have: not thee, but "one" of the hottest NA motors soon too.
Eveything here but sticks and springs.
Still can't decide witch cams to go with yet.Or who to have make them.
Hoping someone comes out with something at a good price. So I've been waiting.Could finish anyday just waiting.
About the only thing I have not started to change or mod is the trans but,before the engine gets dropped in I will make some sort of choice there too.
It's your ride but, the wheels are a really dated style even if a remake,and even if a remade by a expensive wheel company.
Keep on op did not mean to dent your hot whips thread.
#37
Moderator
Chapter Leader (South Florida Region)
Chapter Leader (South Florida Region)
iTrader: (6)
Tire kingdom, huh? 172nd? You must be friends with the guy that drives the Maxima but also has a 10 second GTO. He's a manager, I think, and friends with Alex from tires plus. Don't remember seeing your car though.
This is probably the group of people we need to get together for our little reliable mini meets. CL's looking great on those wheels...it almost looks photoshopped it's so slammed.
This is probably the group of people we need to get together for our little reliable mini meets. CL's looking great on those wheels...it almost looks photoshopped it's so slammed.
#38
unless its BETTER than a 2.6liter H22 motor, i doubt your motor will come close to one of the most bad ass NA motors for this chassis. I heard that dude is doing a 2.7liter K24 next.
#40
Tire kingdom, huh? 172nd? You must be friends with the guy that drives the Maxima but also has a 10 second GTO. He's a manager, I think, and friends with Alex from tires plus. Don't remember seeing your car though.
This is probably the group of people we need to get together for our little reliable mini meets. CL's looking great on those wheels...it almost looks photoshopped it's so slammed.
This is probably the group of people we need to get together for our little reliable mini meets. CL's looking great on those wheels...it almost looks photoshopped it's so slammed.