I saw where the j30a1 blots right up to the 6-speed manual so can you do the same with auto type-s tranny? Sorry if this has already been answered but I couldn't finad it and don't remember asking.

 

why? The auto tranny is a piece of junk.

AND SERIOUSLY MAN, DO A FUCKING SEARCH!



you have got to be kidding me

 

http://www.acura-cl.com/forums/showt...ight=Type+Auto


first page that popped up, I won't even bother going through more.


This would be a stupid swap as the Auto Trans in the 3.2's is a bigger POS then ours is. You should know this stuff man, you've been around long enough.

 

omfg, you shoudl be sentenced to no posting, just reading, and you should be forced to ready 100 threads a day for a year before you cna post again.... you are the lifelong newb

 

So let me give you the answer Roddy. The tranny will bolt up, you may have to widen the access to the firewall a little bit as I believe the Type S 5AT is a little bit wider then ours. You will have a hard time getting all the wiring done as those trannies have their own ECU. On top of all that, the 5AT they have is a piece of junk. Haven't you been reading about all the recalls, etc?

 

No my bad, umm reason I asked is trying to get the set up of the AC-R Accord. I would love two have the 300hp all motor, just makes my goal of 400hp all the easier sorry for the dumb question

 

better have $$$... it might take 10 yrs for you to get all that money(not only this, but everything u posted)











jk

 

roddy roddy roddy...

another thread by roddy

 

that will turn into a and :gheywave: soon.