Maaan! Im soo pissed off . I lowered my 2.3 w/ suspenison techniques 2" drop three months ago, now my yokohama paradas are worn down to the metal on the inside of the front wheels..And they were almost new...Fuck I need a camber kit

 

Anyone could have told you that.

I suggest Ingalls. I haven't had any major problems with them so far but some people think they're a pain in the ass.

 

just for the front though right? And all I would need id washers for the back?

 

 

you might have to get some really long bolts so you can add extra washers if need be for the rear...get a free alignment check done somewhere so you know how many degrees you are off by. That will help you determine what kit to get (you may not need an extreme 1.5-3 degree correction)

 

For the rears, I just used the bolt and washer style.

I'm dropped about 2.5" and it's within specs.

 

you dident notice 1/2 the tire was smooth?

 

i hate to say this, but duhhhhhh ;P

-shawn

 

Well , it wasnt even half the tire man. it was the far corner of the tire. maybe an inch or two of just wire. Man, I didnt think that my camber was that bad.. But oh well I learned the hard way ...

 

THanks for the help sucka...

 

CL's are known for their bad camber... always ask questions before doing anything.. People have done enuff trial and error for you not to get skrewed over!

-shawn