here's a preliminary sketch, just to give you guys a direction, post comments and suggestions and show interest enough, and this could be a possibility. As far as the kit, it will be constructed of polyurethane, and it will be an add on lip kit, you can see the seams. Pricing will be like the 2nd gen Acura CL kit posted on our website:

 

sorry, here's the image:

 

hotness. can you give us a better idea of what the rear will look like?

 

rondog you might want to round up the front kit a little more. It looks too square. The side squirts are straight and we need to see the rear when you get the chance to do a sketch on it. So far so good!
With a few adjustments this kit should look SWEET!

 

Also the middle of the front kit should not be one straight line accross; raise up the middle a bit like the stock front bumper.

 

Yeah, I'm gonna fine tune it, i already see a few things that need adjustments, and i'll do something for the rear, and i already receieved a few pms about the cost, just refer to this page and scroll down, same pricing and tech info:
http://ronjonwheels.com/clkit.html

 

i like it..thanx for using my whip to do the photoshop on(minust the rd rims).
now i can really get an idea of what my shit will look like if this kit ever makes it to production.. i think alot of 1st genners will jump on this 1

 

rondog how about using more or less the same front and rear bumper as the 2nd gen CL? Have you tried photoshopping and seeing how it will look? I think the whole kit from the 2nd gen CL's will fit and look How about following those same lines.

 

 

^

 

Excited to see the rear and adjustments. Good base design to work off of.

 

how about just a front lip, i think more people would buy it, idk if many would buy the whole kit

 

Im liking it so far. Definitely want to see the rear.

 

 

what about doing a 3 piece kit to compliment the Wings West front lip that many of us already have?

 

This was my suggestion back when this started. Use the ww lip as a base and build around it. THe ww lip is pretty perfect the way it is, even though they are a bitch to find.

 

but I think the 2nd gen front kit would look SWEET on our car. Lets
see what rondog comes up with and then we give our opinions.


BTW - The front kit has to look SWEETER than the Wings West front lip or I
will give it a

 

i dont like it.. doesnt look aggressive enough..

it just makes it look like a double chin.. should look a little sharper ...

my though

 

I think it looks clean as hell. Not ricey at all. I'd get it if it were to come out. Anything more aggressive and I'd stay away from it. Great job man, keep it up!

 

I think its HOT

 

how much is the ????

 

Looks pretty good... Would have to see end result...

 

I like it. Nice and clean... I think it would be worth your while in the long run to make them.

 

double chin

 

thanks for the feedback, i think the front lip only might be a possibility, sides and rear can be ww, or even OEM, just don't think its really worth it. even if the kit did sell 25 or more in a month or 3, that the break even point, have to move a ton more to say it's really worth it. i'll post a more updated version soon.

 

 

wow i think that looks pretty good, any shots of the rear?

 

round some of those edges just a little bit, but it looks f'ing hawt. Lets see what that rear looks like, eh?

 

make it look similar to VXCL's old setup and id buy!

 

^^ make it look like vxcls new set up and i'l buy it

 

 

I definately think it should look sharper. It looks like a second gen, witha double chin. I personally was hopin for somethin more aggressive too.

 

very nice, i like the front lip a lot

 

I think the front lip looks really good, I like it way better than the 2nd gen one. Very good work not making it too aggressive and ricey. I would buy if the price was right.

 

I really like it. Needs a bit of tweaking, but I know the final production will be really smooth. I would deffinitely buy it. When I get a job of course.

 

yea thats what i think..i guess everyone really has different opinions on what a nice kit should look like..i think the front is off the chain

 

x 10,000. Yeah, MUCH better than the 2nd gen one.

 

yeah it really does. id buy this if it was say 800-1k for the whole kit.
plus it has enough room for an intercooler(if you need one). i molded it but thats just what id do. just looks cleaner IMO.

 

Then you would need to cut the bumper.. no? Does look good though... Maybe 2 or 3 designs can be made and then have the forum chose which kit they like best?? Props for the effort though..

 

that opening is impossible since the kit is just an add on lip and that would require cutting the original bumper, and once again, an add on lip, or the whole add on kit would priced this way:
http://ronjonwheels.com/clkit.html
(scroll down for prices and info)