manfactured projector housings
#1
manfactured projector housings
i think that there is enough interest in projector housings that we should start a petition or write a company like DEPO to make a projector housing for our cars. Im positive if they made a normal looking projo housing (like no ricey angel rings) in a chrome version and a black version, they would sell a lot.
What does everyone else think?
What does everyone else think?
#3
im working on a design with apc but the interest is not there from the R&D they say
but it is hard
ive been trying to get them to make a set for over 2 years now, and now i am finally getting them to listen to me
it is hard and the money to research it is a lot thats why i will design them and hopefully sell the design to them
but it is hard
ive been trying to get them to make a set for over 2 years now, and now i am finally getting them to listen to me
it is hard and the money to research it is a lot thats why i will design them and hopefully sell the design to them
#5
see, all these aftermarket company makes ghetto looking LED angel eyes..............if we get angel eyes, i want the real BMW looking ones, not the cheapo LED rings.
I'd perfer no angel eyes then the LED ones.
Something similar to this design would be ideal........simple projo low beam, and reflector high beam.
I'd perfer no angel eyes then the LED ones.
Something similar to this design would be ideal........simple projo low beam, and reflector high beam.
#6
Originally Posted by ajbent86
see, all these aftermarket company makes ghetto looking LED angel eyes..............if we get angel eyes, i want the real BMW looking ones, not the cheapo LED rings.
I'd perfer no angel eyes then the LED ones.
I'd perfer no angel eyes then the LED ones.
#7
Originally Posted by 97Acura3.0CL
im working on a design with apc but the interest is not there from the R&D they say
but it is hard
ive been trying to get them to make a set for over 2 years now, and now i am finally getting them to listen to me
it is hard and the money to research it is a lot thats why i will design them and hopefully sell the design to them
but it is hard
ive been trying to get them to make a set for over 2 years now, and now i am finally getting them to listen to me
it is hard and the money to research it is a lot thats why i will design them and hopefully sell the design to them
Trending Topics
#10
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
iTrader: (6)
Joined: Jan 2005
Posts: 92,263
Likes: 4,492
From: ShitsBurgh
Originally Posted by 97Acura3.0CL
im working on a design with apc but the interest is not there from the R&D they say
but it is hard
ive been trying to get them to make a set for over 2 years now, and now i am finally getting them to listen to me
it is hard and the money to research it is a lot thats why i will design them and hopefully sell the design to them
but it is hard
ive been trying to get them to make a set for over 2 years now, and now i am finally getting them to listen to me
it is hard and the money to research it is a lot thats why i will design them and hopefully sell the design to them
#11
yea the only problem with using real oem bmw ring you are talking big bucks
thats why there is aftermarket companies that make them, to cut the manufacturing cost down with cheap products
it may not look as well but it works
also i am going to submit a design that uses hopefully the valeo h7 projectors since you can modify them to fit d2s very easily
but it is going slow and my contact time is limited with my hours i work but it will get done
the design will get done but the implement on the companies side is up to them if it is costly enough to provide a new lone of headlights and the demand is there as well
remember all you business majors out there, key thing to having a sucessful business is your supply and most of all yoru demand.
thats why there is aftermarket companies that make them, to cut the manufacturing cost down with cheap products
it may not look as well but it works
also i am going to submit a design that uses hopefully the valeo h7 projectors since you can modify them to fit d2s very easily
but it is going slow and my contact time is limited with my hours i work but it will get done
the design will get done but the implement on the companies side is up to them if it is costly enough to provide a new lone of headlights and the demand is there as well
remember all you business majors out there, key thing to having a sucessful business is your supply and most of all yoru demand.
#17
Originally Posted by bkmc24
so your gonna just do projector? does anyone one know what cars angel eyes will fit a cl with litte mods cuz thats what i want personally
#18
Originally Posted by ajbent86
98acura3.0CL, what kind of design are you working on? dual projectors or single?
dual projectors, D1S setup from a Audi i believe i cant remember, also come in the 300 M 2004, very rare setup, with a brand new setup of bulbs and ballasts for my hook up at osram
dont ask how i got it but i did
then the dual is a rx300 mini fog light projector fitted with a JDM yellow bulb and i will try to run it as DRL like the lexus cars, then to top it off i found some nice Halogen exterior projectors for 30 bucks, the brightest AM exterior projectors for fogights and they are halogen buls which i will switch to a nice piaa so then you got yourself a triple beam setup 2 inside one outside
then on top of that im testing out retroing in OEM bmw angel eyes with custom leds, 10k mcd and 12k mcd, i need to see what will look better, pics will come soon, the leds should be here any day
but pics are coming so are the instructions to make them, which i will give up for a small fee since this project is expensive and my writeups if you ask anyone are VERY VERY detailed, look at my Woodgrain Removal Instructions, 8 pages and 8 mbs big
the projector one i am expecting to be around the 15-20mb file, and this is a word document
so hold all your horses time is of the essence and i dont have much of it but you will be amazed when im done i know my hard will will show and my R&D for over a year and a half of designing way too many setups that would work is finally paying off now with what ive planned
#24
Originally Posted by bkmc24
man angel eyes are bad ass if i could get some i def would but either way ide like either one
#28
Originally Posted by sumdumguy
only BMWs come with angel eyes....or do you mean what model BMw?
#31
Originally Posted by ajbent86
thoes black housings look REALLY good on the darker colored CL's............but for thoes of us that have red, primrose, or the light blue, chromed housings are better.
#32
Originally Posted by bkmc24
well theres aftermarket ones for like integras n idk what else but what cars headlights will fit our cars without tons of mods that will look somewhat the same? will accors fit?
#33
thoes black housings look REALLY good on the darker colored CL's............but for thoes of us that have red, primrose, or the light blue, chromed housings are better.
I think theyll look good on any color not just the dark ones
I think theyll look good on any color not just the dark ones
#34
well, here was the reply that i got from TYC about making them............
In regards to custom lamps for the Acura CL, we will not be producing lamps for this application. Unfortunately it is not possible to produce a custom run of lamps due to costs involved. I understand the demand for an new item, however the average cost of the tooling itself is about 250-300k. When an application is selected for development, we look at number of vehicles sold, currently on the road and demand. If any of these falls short, particularly the first two, then the application is not selected. I hope you understand. If you have any questions, please let me know. Thanks.
Jeff Leu
Jeffreyleu@genera.com
TYC/Genera Corporation
26 Centerpointe Dr., #100
La Palma, CA 90623
(714) 522-6688x191
In regards to custom lamps for the Acura CL, we will not be producing lamps for this application. Unfortunately it is not possible to produce a custom run of lamps due to costs involved. I understand the demand for an new item, however the average cost of the tooling itself is about 250-300k. When an application is selected for development, we look at number of vehicles sold, currently on the road and demand. If any of these falls short, particularly the first two, then the application is not selected. I hope you understand. If you have any questions, please let me know. Thanks.
Jeff Leu
Jeffreyleu@genera.com
TYC/Genera Corporation
26 Centerpointe Dr., #100
La Palma, CA 90623
(714) 522-6688x191
#35
Originally Posted by ajbent86
well, here was the reply that i got from TYC about making them............
In regards to custom lamps for the Acura CL, we will not be producing lamps for this application. Unfortunately it is not possible to produce a custom run of lamps due to costs involved. I understand the demand for an new item, however the average cost of the tooling itself is about 250-300k. When an application is selected for development, we look at number of vehicles sold, currently on the road and demand. If any of these falls short, particularly the first two, then the application is not selected. I hope you understand. If you have any questions, please let me know. Thanks.
Jeff Leu
Jeffreyleu@genera.com
TYC/Genera Corporation
26 Centerpointe Dr., #100
La Palma, CA 90623
(714) 522-6688x191
In regards to custom lamps for the Acura CL, we will not be producing lamps for this application. Unfortunately it is not possible to produce a custom run of lamps due to costs involved. I understand the demand for an new item, however the average cost of the tooling itself is about 250-300k. When an application is selected for development, we look at number of vehicles sold, currently on the road and demand. If any of these falls short, particularly the first two, then the application is not selected. I hope you understand. If you have any questions, please let me know. Thanks.
Jeff Leu
Jeffreyleu@genera.com
TYC/Genera Corporation
26 Centerpointe Dr., #100
La Palma, CA 90623
(714) 522-6688x191
#37
WE NEED TO GET SOME DAMN PROJECTORS,,,,,,,,,,HALOS,,,,,,,AGEL EYES,,,,,BLACK INNERS or some damn thing to replace these old boring lights!!!!!!!!!!!!!!! I mean come on.... They make shit for Ford Escorts, Neons and other cheap ass cars. This is an ACURA,,,, everyone would buy the replacements. Ill buy ten if they make em'!!!!!!!!!!! Just make them already, who cares how much they will cost,,,,,,,,,,,,IM DESPERATE!!!!!!!!!!!!!!!!
#39
Originally Posted by ajbent86
thoes black housings look REALLY good on the darker colored CL's............but for thoes of us that have red, primrose, or the light blue, chromed housings are better.
i have priserose and i think black looks fine
#40
Originally Posted by FERTIGUK
WE NEED TO GET SOME DAMN PROJECTORS,,,,,,,,,,HALOS,,,,,,,AGEL EYES,,,,,BLACK INNERS or some damn thing to replace these old boring lights!!!!!!!!!!!!!!! I mean come on.... They make shit for Ford Escorts, Neons and other cheap ass cars. This is an ACURA,,,, everyone would buy the replacements. Ill buy ten if they make em'!!!!!!!!!!! Just make them already, who cares how much they will cost,,,,,,,,,,,,IM DESPERATE!!!!!!!!!!!!!!!!
I got some new projectors for sale
pics to come later tonight or tomorrow