intake
Thread Starter
10th Gear
Joined: May 2006
Posts: 10
Likes: 0
intake
I am new to this car. I've never worked with Honda's before. I have a 98 CL 3.0. Its kinda slow but I see it has potential. First I want to start with a few bolt-ons. I cant find a cold air intake for this car. I found some short rams but thats it. Does anyone know of a good intake system for this car? Also the car already has 2.5 in exaust. So Im sure all I need to open up the airflow is put a new muffler on it.
Does anyone have advise on the intake or exaust for my car, or know of any mods that arent expensive to help this car move quiker?
Also I noticed my motor is the same one in the Accord V6 (late 90's). Can I use engine mods built for the Accord on my car?
I would appreciate the help. Thanks.
Does anyone have advise on the intake or exaust for my car, or know of any mods that arent expensive to help this car move quiker?
Also I noticed my motor is the same one in the Accord V6 (late 90's). Can I use engine mods built for the Accord on my car?
I would appreciate the help. Thanks.
07 tl-s in
Joined: Oct 2005
Posts: 6,946
Likes: 12
From: NORTH NJ
there you go the bible for the 1st gens click,read,then get back if your still
https://acurazine.com/forums/showthread.php?t=179727
welcome to the board and if you think a 3.0 is slow thank god you didn't get a 2.x
(i had too 
)
Alex's CL
Joined: Jun 2004
Posts: 631
Likes: 0
From: FL, miami
ull find all the info you need on the noob guide. But just incase you cant find it.
CAI- same as 98-02 accord V6
headers- either comptech or ssautochromes V6
Pulleys- unorthodox racing pulleys (you can find those on this forum in the black market then go to sponsored sales you find them there)
exhaust- you can 2.5" pipe it the whole way or 2.25 the rear end b/c the car comes with a 2.25 all the way to the rear wheel which then becomes to a 1.75 I believe.
spark plugs- ngk's iridiums in my opinion
sparkplug wired- ngk or mag.
mufflers- (your taste) good sound, I say 1486 (i think) magnaflow with a 18" resonator or 22".
thats all i can think about for bolt ons......
CAI- same as 98-02 accord V6
headers- either comptech or ssautochromes V6
Pulleys- unorthodox racing pulleys (you can find those on this forum in the black market then go to sponsored sales you find them there)
exhaust- you can 2.5" pipe it the whole way or 2.25 the rear end b/c the car comes with a 2.25 all the way to the rear wheel which then becomes to a 1.75 I believe.
spark plugs- ngk's iridiums in my opinion
sparkplug wired- ngk or mag.
mufflers- (your taste) good sound, I say 1486 (i think) magnaflow with a 18" resonator or 22".
thats all i can think about for bolt ons......
07 tl-s in
Joined: Oct 2005
Posts: 6,946
Likes: 12
From: NORTH NJ
Originally Posted by slamed_cl_on_18z
ull find all the info you need on the noob guide. But just incase you cant find it.
CAI- same as 98-02 accord V6
headers- either comptech or ssautochromes V6
Pulleys- unorthodox racing pulleys (you can find those on this forum in the black market then go to sponsored sales you find them there)
exhaust- you can 2.5" pipe it the whole way or 2.25 the rear end b/c the car comes with a 2.25 all the way to the rear wheel which then becomes to a 1.75 I believe.
spark plugs- ngk's iridiums in my opinion
sparkplug wired- ngk or mag.
mufflers- (your taste) good sound, I say 1486 (i think) magnaflow with a 18" resonator or 22".
thats all i can think about for bolt ons......
CAI- same as 98-02 accord V6
headers- either comptech or ssautochromes V6
Pulleys- unorthodox racing pulleys (you can find those on this forum in the black market then go to sponsored sales you find them there)
exhaust- you can 2.5" pipe it the whole way or 2.25 the rear end b/c the car comes with a 2.25 all the way to the rear wheel which then becomes to a 1.75 I believe.
spark plugs- ngk's iridiums in my opinion
sparkplug wired- ngk or mag.
mufflers- (your taste) good sound, I say 1486 (i think) magnaflow with a 18" resonator or 22".
thats all i can think about for bolt ons......
keep your eyes out on ebay or here/black market for good deals/groupbuys for parts for our car.there are some sites also you can get some stuff from...
that's what mine is
Trending Topics
Thread Starter
10th Gear
Joined: May 2006
Posts: 10
Likes: 0
And for the headers does anyone know of some good ones that are not $1000 for comptech? I heard OBX were shitty. Anymore advise? And if I cant find some for my CL what years of the Accord can I search for?
Joined: Jan 2005
Posts: 92,743
Likes: 4,677
From: ShitsBurgh
Originally Posted by hoss
Get the SSautochrome headers.I highly recommendthem and so do many other on here.
They're the only headers people on here have tried that don't need bent to fit
Thread
Thread Starter
Forum
Replies
Last Post
rp_guy
Member Cars for Sale
9
Jul 16, 2017 07:33 AM
rcs86
Car Parts for Sale
3
Aug 2, 2016 06:52 PM