I know I do. and it's starting to get a little long...

1. C/V Joints
2. Right Tailight Leak
3. Trunk Carpet
4. Camber install
5. Wheel alignment
6. right horn button
7. Driver Seat motor
8. Passenger Window Motor
9. Low Gas light
10. CEL - Cyl 1 misfire?
11. Brakes feel weak...
12. side mirrors dont work

just sat down, and wrote this up not too long ago. I really want to just fix all the little things (and important things as well) before I keep modding my car (but its just so damn hard. )

What's on your lists?

 

13. Resonator for exhaust*

just thought of this one... and got cut off from the 5 min. rule

 

hmmmm this thread should be fun

1. Tensioner (gonna get it fixed tomorrow)
2. ABS light been on for months(tomorrow hopefully too)
3. The scratched paint on my front bumper from the license plate that ive removed
4. broken cup holder, door wont close
5. -1º camber, not much wear on the back, but front tires went bald from my crazy driving
6. When i get a handful of $ fix the scratches and dings in the rims.. maybe refinish them to gloss black.
7. Dent everybody makes fun of when they see (hybrid) thats on the part in between my back window and my rear right window.

damn thats all i could think of, everything else i thought of wasnt a fix it, just another mod.
argando you beat me, lets see if anybody can top this guy.

 

my car isnt running like a champ

 

I have a fix it list, that's part of my mods to be installed list. I have a list a page long of shit that needs installed. I also have a list of future mods to be bought, just don't have the $$ for yet.

 

my door check broke. that fucking sucked.

my spoiler snapped from bass.

other shit was results a fender-bender (corner lights assemply clamp).

 

1. body work (dented fender/door when i bought the car)
2. new spoliler
3. fix/new hood
4. body kit (front bumper is fuxed)
5. paint
6. shifter bushings
7. reinstall subs
8. real battery tie down
9. fix the horrible vinyl job that was done on the interior

it never ends

 

1. Driver seat leather repair
2. Digital alignment
3. Oxygen sensor
4. Passenger window motor
5. Rear passenger brake line leak

 

1. Resonator for exhaust
2. Replace stock shocks with KYBs
3. Custom piping for exhaust
4. Paint skirts
5. Trim panel for in-dash screen unit
6. Dynamat back shelf and trunk
7. God knows what else....

 

1. Car isn't running (me and you both insoyne......same damn boat! lol)

 

1. Small gouge in driver door pannel.
2. Air flow baffel for cai.
3. Propper mounts for cai. (held by zip ties.
4. Passenger head light seal. (I discovered this after a trip through some flooding streets and two massive thunder storms.) On this one, do you really have to remove the bumper to remove the headlamp assembly? If so, what a fucking pain in the ass. Oh well, gives me a reason to persue black housings.

 

pretty soon ill have to send out an SOS.

 

i have so much shit to do, heres some off the top of my head

1. repaint front bumper, sides
2. undent my wheels
3. get an alignment
4. get some other random dents taken care of
5. fix my shift boot/knob

 

A few more for the Mistress...

5. Paint and mount my new spoiler.
6. Repaint my front bumper... rock chiped and flaking.
7. Fill and blend a number of small paint scratches and chips on doors and fenders. (asshole people in parking lots and road debris/rock related)

 

1. fix front bumper
2. paint front bumper
3. door dings
4. fix exhaust leak
5. alignment
6. fix horn, radio controls, and cruise all on the steering wheel
7. remove SRS light
8. replace PCV valve
9. brake pads
10. left fender

 

oh ya good one guys paint my front bumper and hood, skirts

 

1.Fenders rolled
2.Front and back bumpers painted
3.Full exterior detailing job to get rid of all my spiderwebbing on the paint.
4.2 dents that I can overlook.

Anyone know how much it woudl run to get front and back bumpers painted?

 

there fixed it

 

1. Get some dents fixed
2. Get front bumper repainted (scratched)
3. Fix driver's seat (rip in bolster)
4. Replace worn out floormats

 

So many of us have paint woes. I don't feel so bad about my small issues. I must say I am still a little conserned with the water in my headlamp. Oh well.

 

huh,
pass side headlight (small crack)
drivers side seat power motor
tattered leather (drivers seat and steering wheel)
cup holder door
floor mat.. (just one)
sunroof gasket is near dead
bits of fake wood trim are dead
that damned abs thing

right now most my mechanichal stuff is taken care of, but tires, shocks, brakes, and clutch are hanging over my head.

 

forgot one

5. Drivers seat heater

 

8. Driver's side seat heater switch on LED. (nolonger lights when seat heat is on)

 

1. ABS light
2. fix-it ticket on exhaust
3. need resonator
4. scratches and dents

-_-''

 

1. oil change
2. recharge k&n filter
3. fix right front bulb/socket
4. abs light
5. get bottle filled/remount it
6. start running 93 octane only again..

not in that order

 

man i hate people, we all got little dents on our cars. sucks people can't just relax and look before they swing open their doors

 

1. Timing belt
2. Plugs
3. Rotors
4. Paint job
5. Interior
6. Alignment/Camber Kit
7. New Exhaust w/ Resonator it's too f***** loud...

 

1. clear out the CEL (egr clog)
2. PAINT JOB my $hit's a parking lot war vet
3. drop and shocks...rims left a pretty big gap
4. new seats
5. rotors are starting to warp
6. new exhaust/VAFC/namebrand intake
7.

 

From what I have read, you definately have to remove the bumper to get the headlight out. I haven't seen any work arounds, as for the driver dor, pm sent.

 

not really a fix list as much as a I want but dont have the change yet. I dont want too much just a few things.

1. Paint! (If I do paint I want to remove the rear A emblem and my rear spoiler)
2. Suspension
3. Wheels/tires
4. Intake/Exhaust
5. HID/ clear corners
6. Tint and taillight tint
7. Possibly upgrage my premium CL with leather....I feel like the only one with an acura that doesnt have leather, especially with a premium model '
8. Possibly sound system/video

thats it for now, def. more but thats what could keep me happy for a while. Just gotta find a decent paint quote.

 

valve adjustment, but will do after I get my cams installed.

 

1. Repaint moldings
2. Lumbar support doesn't lock into place

That's about it right now...

 

1. Dent on panel
2. Front cambers installed
3. alignment
4. New tires(camber wear)
5. Get front add-on(not sure if its a fix it problem)
6. Tune vavles to factory specs.
7. Finish audio work.

so much...so little time.

 

1.rearstrut bushings
2. re-finish rust on wheel well(in 2weeks)
3. main window switch
4. abs light-i kind of like it without abs
5. new gauge cluster
6. camber kit

 

this may sound anal but i have two signs i made for my side windows, and they say, please dont door nick me cause i wrote down your liscense plate nimber and i will find you. then i write down thier plate number and what kind of car and put that piece of paper in the front window. well then my wife takes prescious to school to show off and she doesent do my sign thing, and she always comes home with new dents.


this weekends projects:

timing belt/waterpump, and all the crap that goes with it.
adjusting valves
finally will put on my camber kit
followed by a nice bubble bath and fresh coat of astroshield polish.

 

thats a good idea....but it doesnt sound kinda "anal".....but what can you do to prove they made the dent?

 

another thing...what i do is park next to a new and $30,000+car...they will care if their door will hit the next person or not.
so do not park next to a:
-SUV's
-Lifted or non lifted trucks
-Vans(kids)
-Bucket(dont care kind of ppl)
-Shopping carts..........etc.....you can make your own judgements, but these are mines

 

hmm lets see, wuts on the to do list....



1. A NEW CAR!

 

^^ WTF did I miss...when did this happen??

 

It happened last week..
https://acurazine.com/forums/showthread.php?t=173008