Who's got them
What kind do you got
Where did you get it
How much did it coast

 

from what i read in the newbie thread, the only ones made are from comptech and not worth the $1100....

but tha's just what i read.

 

I have a 2.3

but you can get them on ebay dust has them...
OBX
and the coast? dunno...

but the price you can get them for 350 or something like that.

look under the accord 98-02 v6 I believe.

 

I have the OBX for my 3.0 too.....they costed me 348 shipped........and costed me a pretty penny to install them...but i was willing to pay anything to get em in before running SooDark...lol....but I heard you can get em installed for pretty cheap, as long as you can find someone to bend the downpipe...

 

they helped out my top end by a lot....but then again, i have a few other bolt ons that could have contribute to that...

 

Once the downpipe is bent, the installation is easy! I've installed 3 sets with the help of the respective CL's owners.

http://www.acura-cl.com/forums/showt...threadid=82498

 

So everybody likes there OBX headers? I have heard that alot of people say they don't help and that they are no good so....? I was wondering how 3.0 were runin with the header exhaust and intake?

 

ditto

anyone else got anything besides obx?

 

Obx is the way to go. I don't think there is much difference between them and the comptechs.

 

where the hell down here can do that shiz though, ESH?

 

Esh, midas, any place that bens metal tubing.

 

I've had mine on for 18 months! No problems here.

 

They do help out quite a bit, from what I've heard. As far as the quality, you could have the shop touch up all the welds for a little extra cash.

 

True, but you can barely see the headers, once installed. Someone would really need to look to see any of the welds (or any of the touch ups).






Grinding the welds MAY help with exhaust flow, but I'm not sure how much.

 

dust is the power increase noticible? butt dyno style?

 

I herd that the stone headers were claiming 20whp. Mite wanna check into those. Run a search on v6p.net.

 

Absolutely!

Except for the nitrous, it's the ONLY mod I could feel with the butt dyno!

 

Dust what kind of 1/4's were you running n/a?

 

I only ran several n/a 1/4-miles with a short ram. I ran a 15.8 at that time.

Since I installed the Zex (June of '02), I have NO time slips that aren't without nitrous. This covers the time period that I put on the headers and exhaust. I'll need to do a n/a run here soon to see. My guess is mid- to low-15's.


More importantly, I want a 13-sec time slip (I'm so close)!

 

Mid 15's, dude no way with a 3.0. When I ran, which this was with one of those little digital things, Mine was like a 14.7

 

Those things aren't acurate man. There are some accord v6's that are running 14.7 with all the bolt on's except FI.

 

well do you guys have like port and polish and everything or are you just talking intake headers and exhaust

 

Just the bolt-on's no headwork.

 

So do the NSX headers fit our cars? CauseI think DC makes headers that may be cheaper. I would be willing to bend or even weld pipe on if they fit

 

It could be possible, but all the fabrication would be $$$$$.

 

yeah unless you got the hook up like me

 

so obx is the way to go.... with having to bend the downpipe 1" to the right?

lost me :P

 

Well, some accord v6 guys were running stone headers and claiming 20whp on the dynos. But the headers are backordered or sumthing and they are trying to get some more. The headers were $400shipped if i remember correctly.

 

Never mind on the NSX headers I look at them and they are so different

 

Bend the left downpipe (pipe that goes to the rear cylinder bank) towards the right (in towards the flexpipe).

 

cool tip