Got my 01 CL S yesterday
#121
GO RANGERS!!!!!!!!!!!!!!!
Thread Starter
iTrader: (6)
Koni Yellows and Comptech springs/rear sway in
One prior to going in the car
The car is now pretty much done.
One prior to going in the car
The car is now pretty much done.
#127
GO RANGERS!!!!!!!!!!!!!!!
Thread Starter
iTrader: (6)
Thanks for the kind words.
I will work on a list and am glad to have the car where I want it.
Time to pay attention to the Land Cruiser again.
I will work on a list and am glad to have the car where I want it.
Time to pay attention to the Land Cruiser again.
#129
GO RANGERS!!!!!!!!!!!!!!!
Thread Starter
iTrader: (6)
Current mods include
P2R Intake, Thermal Gasket & spacer.
DC Sport headers
Driving lights have PIAA 18 watt bulbs
Kenwood DVD/NAV in stock NAV location Infinity Perfect 6.1 in front stock location and Infinity Kappa 6X9s (don't remember model) Run by Alpine MRP-F550 and Infinity Basslink II round out the stereo (My iPhone & Sirius S2 are the primary sources)
Power Slot Cryo rotors & Akebono pads
05 TL rims
Koni Yellows & Comptech springs and rear sway bar
Magnaflow 14832 mufflers & resonator
Trunk lip
I am waiting for an Unorthodox pulley set, Neuspeed 27mm front sway & RT cat and maybe then I will really be done, who knows.
P2R Intake, Thermal Gasket & spacer.
DC Sport headers
Driving lights have PIAA 18 watt bulbs
Kenwood DVD/NAV in stock NAV location Infinity Perfect 6.1 in front stock location and Infinity Kappa 6X9s (don't remember model) Run by Alpine MRP-F550 and Infinity Basslink II round out the stereo (My iPhone & Sirius S2 are the primary sources)
Power Slot Cryo rotors & Akebono pads
05 TL rims
Koni Yellows & Comptech springs and rear sway bar
Magnaflow 14832 mufflers & resonator
Trunk lip
I am waiting for an Unorthodox pulley set, Neuspeed 27mm front sway & RT cat and maybe then I will really be done, who knows.
#130
GO RANGERS!!!!!!!!!!!!!!!
Thread Starter
iTrader: (6)
Clifford G5 & remote start
Knew I'd forget something, hate the 5 minute rule
Knew I'd forget something, hate the 5 minute rule
#133
GO RANGERS!!!!!!!!!!!!!!!
Thread Starter
iTrader: (6)
Sorry they were thrashed and I threw them away. They are 33.45 new each.
http://www.oemacuraparts.com/partloc...layCatalogid=0
http://www.oemacuraparts.com/partloc...layCatalogid=0
#134
Sorry they were thrashed and I threw them away. They are 33.45 new each.
http://www.oemacuraparts.com/partloc...layCatalogid=0
http://www.oemacuraparts.com/partloc...layCatalogid=0
Dawg, You could ve saved me a Bunch $34 is a lot these days considering economy isnt very sexy anymore. Please Next time if you want to trash anything "I mean Acuras Parts and not anything else ", Just let me know I'll pay for shipping...
R.
#135
GO RANGERS!!!!!!!!!!!!!!!
Thread Starter
iTrader: (6)
2) I did not know you existed six months ago when I replaced them BECAUSE THEY WERE THRASHED
3) I Have tried to be nice and send people things for shipping and got sh*t on for my trouble so won't do that again.
4) Sorry but if you can't afford to spend under 80.00 you can't afford a car.
#136
1) THEY WERE THRASHED
2) I did not know you existed six months ago when I replaced them BECAUSE THEY WERE THRASHED
3) I Have tried to be nice and send people things for shipping and got sh*t on for my trouble so won't do that again.
4) Sorry but if you can't afford to spend under 80.00 you can't afford a car.
2) I did not know you existed six months ago when I replaced them BECAUSE THEY WERE THRASHED
3) I Have tried to be nice and send people things for shipping and got sh*t on for my trouble so won't do that again.
4) Sorry but if you can't afford to spend under 80.00 you can't afford a car.
Continue with your thread, I'm sorry if I was too Crucial!!!
R.
#137
GO RANGERS!!!!!!!!!!!!!!!
Thread Starter
iTrader: (6)
#139
GO RANGERS!!!!!!!!!!!!!!!
Thread Starter
iTrader: (6)
Thanks. I love them every time I walk up to the car.
#142
GO RANGERS!!!!!!!!!!!!!!!
Thread Starter
iTrader: (6)
UR Pulley set, RT Cat & 27mm Neuspeed front sway.
#143
GO RANGERS!!!!!!!!!!!!!!!
Thread Starter
iTrader: (6)
UR pulleys (all 3) went in today, RT highflow cat went in last week, all that is left is the Neuspeed front sway which will go in after the rear main seal is done next week.
Last edited by e30cabrio; 02-20-2009 at 09:25 PM.
#145
GO RANGERS!!!!!!!!!!!!!!!
Thread Starter
iTrader: (6)
Thanks.
#147
GO RANGERS!!!!!!!!!!!!!!!
Thread Starter
iTrader: (6)
Thanks, like my solution to leaky power steering fluid?
Painters tape!
Painters tape!
#148
GO RANGERS!!!!!!!!!!!!!!!
Thread Starter
iTrader: (6)
Neuspeed front sway in.
Here is the crank pulley.
Here is the crank pulley.
#150
GO RANGERS!!!!!!!!!!!!!!!
Thread Starter
iTrader: (6)
It is 27, seemed to be the same size as the oem, but it is much heavier so I assume it is solid whereas the oem must be hollow.
Only been in a day seems better but I have not really driven on it, I need to go to L.A. and see how it feels on Mulholland.
Only been in a day seems better but I have not really driven on it, I need to go to L.A. and see how it feels on Mulholland.
#152
GO RANGERS!!!!!!!!!!!!!!!
Thread Starter
iTrader: (6)
It fit perfectly into the stock bushings. I really think it was the same size.
#153
GO RANGERS!!!!!!!!!!!!!!!
Thread Starter
iTrader: (6)
Comptech Strut Bar in.
Anyone know the size and pitch of the studs that attach the wings to the firewall?
(circled in this picture)
They were missing.
Anyone know the size and pitch of the studs that attach the wings to the firewall?
(circled in this picture)
They were missing.
#154
User Awaiting Email Confirmation
iTrader: (5)
Nice job on the install and looks nice in there.
Don't have your answer on the thread pitch.
I would call CT Engineering direct and speak with Nate...he's cool with us Acurazine people!
1.916.635.4550
nate@ct-engineering.com
If he doesn't know...he probably knows the right person to get at.
Don't have your answer on the thread pitch.
I would call CT Engineering direct and speak with Nate...he's cool with us Acurazine people!
1.916.635.4550
nate@ct-engineering.com
If he doesn't know...he probably knows the right person to get at.
Last edited by nf3d0149ab; 03-16-2009 at 07:54 PM.
#155
GO RANGERS!!!!!!!!!!!!!!!
Thread Starter
iTrader: (6)
Cool I'll call tomorrow.
Thanks!
Thanks!
#159
GO RANGERS!!!!!!!!!!!!!!!
Thread Starter
iTrader: (6)
That is true. I was happy where it was in November but as you say there were deals on things so I got the pulleys, cat & sway bar, then the Comptech strut became available and I jumped on it.
I really do think I am where I want to be but who knows?
The car will need tires very soon so that is next but I think the mods are done.
I really do think I am where I want to be but who knows?
The car will need tires very soon so that is next but I think the mods are done.
#160
GO RANGERS!!!!!!!!!!!!!!!
Thread Starter
iTrader: (6)
I realized I never posted pictures of the trans cooler.
I used wire conduit to protect the hoses.
I used wire conduit to protect the hoses.