AcuraZine - Acura Enthusiast Community
This is a transition piece. It is 3" on one end and 2" on the other. So you can go from 3" to 2" or vis versa, the lines are .25" of an inch.
This is a transition piece. It is 3" on one end and 2" on the other. So you can go from 3" to 2" or vis versa, the lines are .25" of an inch.
0 2026/03/18 14:15:19
All of these are 2.5" piping, that's the size I will be using for the manifolds off the heads which will transition into 3" before the turbo.
All of these are 2.5" piping, that's the size I will be using for the manifolds off the heads which will transition into 3" before the turbo.
0 2026/03/18 14:14:10
0 2026/03/09 16:51:06
0 2026/03/09 16:51:03
0 2026/03/09 16:48:00
0 2026/03/09 16:47:58
0 2026/03/09 16:47:55
I bought this intercooler but not sure if I'm going to use it. I am undecided if I want to use a air to water intercooler instead.
I bought this intercooler but not sure if I'm going to use it. I am undecided if I want to use a air to water intercooler instead.
0 2026/03/05 16:03:37
Currently how it sits.
Currently how it sits.
0 2026/03/05 16:02:07
This is how it looked the day I picked it up.
This is how it looked the day I picked it up.
0 2026/03/05 16:00:20
This is how the maven mounts to the bottom of the turbo.
This is how the maven mounts to the bottom of the turbo.
0 2026/03/05 15:59:36
I cleaned the intake manifold because it was dirty with oil/carbon inside.
I cleaned the intake manifold because it was dirty with oil/carbon inside.
0 2026/03/05 15:56:22
NGR bov because I do like the old school bov sounds.
NGR bov because I do like the old school bov sounds.
0 2026/03/05 15:55:10
I will be mounting the turbo to this maven mount.
I will be mounting the turbo to this maven mount.
0 2026/03/05 15:54:40
This is a pulsar 6466 turbo with a T51R mod. The turbine is .92a/r with 3" vband inlet and outlet.
This is a pulsar 6466 turbo with a T51R mod. The turbine is .92a/r with 3" vband inlet and outlet.
0 2026/03/05 15:53:34
I am going to install this radiator fan shroud once I modify the fan holes.
I am going to install this radiator fan shroud once I modify the fan holes.
0 2026/03/05 15:52:29
This was the process of rebuilding the engine, it has about 7,000 miles on it. It runs so smoothly compared to before it was rebuilt. Car has 232,000 miles currently.
This was the process of rebuilding the engine, it has about 7,000 miles on it. It runs so smoothly compared to before it was rebuilt. Car has 232,000 miles currently.
0 2026/03/05 15:50:39
Spec flywheel
Spec flywheel
0 2026/03/05 15:49:57
This is the ac/dc yeswelder I bought, I never tig welded anything before but I'm always open to learning.
This is the ac/dc yeswelder I bought, I never tig welded anything before but I'm always open to learning.
0 2026/03/05 15:48:41
0 2025/12/13 10:19:32
0 2025/12/13 10:19:27
0 2025/09/12 16:57:31
0 2025/09/12 16:56:31
0 2025/09/12 16:56:10
0 2025/09/12 16:55:31
0 2025/09/12 16:55:08
0 2017/12/09 12:45:10
0 2017/08/16 13:39:30
0 2017/07/21 15:14:03
0 2017/07/21 15:13:53
0 2017/07/21 15:10:31
0 2017/07/21 15:10:20