AcuraZine - Acura Enthusiast Community
0 2019/05/25 11:47:05
0 2019/05/25 11:46:54
0 2019/05/25 11:46:43
0 2019/05/25 11:46:34
0 2019/05/25 11:46:24
0 2019/05/25 11:46:15
0 2019/05/25 11:46:04
0 2019/05/25 11:45:52
0 2019/05/25 11:45:43
Comptech exhaust?
Comptech exhaust?
0 2019/05/25 11:45:33
0 2019/05/25 10:55:38
0 2019/05/25 10:55:14
0 2019/05/25 10:55:04
0 2019/05/25 10:54:56
0 2019/05/25 10:54:47
0 2019/05/25 10:54:39
0 2019/05/25 10:54:28
0 2019/05/25 10:54:20
0 2019/05/25 10:54:11
0 2019/05/25 10:54:01
0 2019/05/25 10:53:53
Spotted a Type-S on the way to Cars and Coffee with what looks to Be a Comptech exhaust!
Spotted a Type-S on the way to Cars and Coffee with what looks to Be a Comptech exhaust!
0 2019/05/25 10:53:44
Finished product!
Finished product!
0 2019/05/25 04:53:38
I used a Dremel to shave the socket tip so it would completely seat over the FW bolt. The last thing we want are rounded FW bolts.
I used a Dremel to shave the socket tip so it would completely seat over the FW bolt. The last thing we want are rounded FW bolts.
0 2019/05/25 04:53:31
Use a breaker bar to give you leverage
Use a breaker bar to give you leverage
0 2019/05/25 04:53:24
Use a 3/8 wrench of a smaller caliber.
Use a 3/8 wrench of a smaller caliber.
0 2019/05/25 04:53:18
There are the FW bolts. Size #17 12 point Short 3/8 socket fits like a glove.
There are the FW bolts. Size #17 12 point Short 3/8 socket fits like a glove.
0 2019/05/25 04:53:09
To remove the pressure plate you must shimmy the tranny into the perfect position. And thing less will end in the inability to remove PP due to spline shaft pressing it against the FlyWheel. PP and clutch disk will come out together. I was easier to remove the clutch disk in between the PP and FW first.
To remove the pressure plate you must shimmy the tranny into the perfect position. And thing less will end in the inability to remove PP due to spline shaft pressing it against the FlyWheel. PP and clutch disk will come out together. I was easier to remove the clutch disk in between the PP and FW first.
0 2019/05/25 04:53:02
Old clutch still has meat on it. It was just a lack of pressure from the pressure plate that allowed it to spin.
Old clutch still has meat on it. It was just a lack of pressure from the pressure plate that allowed it to spin.
0 2019/05/25 04:52:53
In all it’s non-SAC glory!
In all it’s non-SAC glory!
0 2019/05/24 20:20:59
In all it’s non-SAC glory.
In all it’s non-SAC glory.
0 2019/05/24 20:18:36
0 2019/05/24 18:31:16
0 2019/05/24 18:31:05
0 2019/05/24 18:30:56
0 2019/05/24 18:30:47
0 2019/05/24 18:30:40
0 2019/05/24 18:30:34
Bought the blue loctite. The gel version stays put. Got a fresh #17 12 point socket for the flywheel bolts.
Bought the blue loctite. The gel version stays put. Got a fresh #17 12 point socket for the flywheel bolts.
0 2019/05/24 17:32:48
Harbor Freight has Torx sockets for cheap. you will need a set to remove the pressure plate. Use size E16
Harbor Freight has Torx sockets for cheap. you will need a set to remove the pressure plate. Use size E16
0 2019/05/23 22:06:13
Move the tranny out of the way! I will jimmy it a bit more, but there is plenty of room for the job.
Move the tranny out of the way! I will jimmy it a bit more, but there is plenty of room for the job.
0 2019/05/23 22:06:12