AcuraZine - Acura Enthusiast Community
0 2018/12/27 18:44:10
0 2018/12/27 18:44:10
0 2018/12/27 18:44:11
0 2018/12/27 18:44:13
0 2018/12/27 19:56:03
0 2018/12/27 19:56:03
0 2018/12/29 15:15:18
0 2018/12/29 21:55:27
0 2018/12/29 21:55:27
0 2018/12/29 21:55:28
0 2018/12/29 21:55:30
0 2018/12/29 21:55:43
0 2018/12/29 21:55:45
0 2018/12/29 21:55:49
0 2018/12/29 21:55:49
0 2018/12/29 21:55:51
0 2018/12/29 21:55:51
0 2018/12/30 18:15:28
I took the front cat off the Type-S for more work room.
I took the front cat off the Type-S for more work room.
0 2018/12/30 18:39:33
I finally took that power steering pump pulley off. Now I was able to remove the tow loop permanently.
I finally took that power steering pump pulley off. Now I was able to remove the tow loop permanently.
0 2018/12/30 18:39:33
Was now able to install new fuel rail and 1300cc Bosch injectors.
Was now able to install new fuel rail and 1300cc Bosch injectors.
0 2018/12/30 18:39:35
0 2018/12/30 18:39:36
Bought these at harbor freight. It allowed me more working space as the car now sits evenly in the air.
Bought these at harbor freight. It allowed me more working space as the car now sits evenly in the air.
0 2018/12/30 18:39:36
Took off the silly tow hook.
Took off the silly tow hook.
0 2018/12/30 18:39:36
I began assembly of the Gerzy Bear Performance Rotrex housing mount.
I began assembly of the Gerzy Bear Performance Rotrex housing mount.
0 2018/12/30 18:45:50
0 2018/12/30 18:45:50
The P2R spacer is on!
The P2R spacer is on!
0 2018/12/30 18:45:51
Test fitting
Test fitting
0 2018/12/30 18:45:51
Shot of the anterior side of the engine. Looks beautiful!
Shot of the anterior side of the engine. Looks beautiful!
0 2018/12/30 18:45:51
Another shot of the P2R I/M spacer and rails.
Another shot of the P2R I/M spacer and rails.
0 2018/12/30 18:45:51
Whilst assembling the wastegate, I noticed the clamp lip didn’t fit over the aluminum flange. Texted Andy, waiting to hear back. It may just be user error.
Whilst assembling the wastegate, I noticed the clamp lip didn’t fit over the aluminum flange. Texted Andy, waiting to hear back. It may just be user error.
0 2018/12/30 18:51:51
After sscuring the new incoming/outgoing fuel lines.
After sscuring the new incoming/outgoing fuel lines.
0 2018/12/30 18:51:54
Because I chose to run the new fuel lines above the old ones, there is a minor bump that is not protected. It would be okay.
Because I chose to run the new fuel lines above the old ones, there is a minor bump that is not protected. It would be okay.
0 2018/12/30 18:51:54
Installed the Rotrex fluid reservoir and aluminum cage. Simple install.
Installed the Rotrex fluid reservoir and aluminum cage. Simple install.
0 2018/12/30 18:51:56
Shot of the fuel lines coming out of the engine bay.
Shot of the fuel lines coming out of the engine bay.
0 2018/12/30 18:51:57
Current shot of the GBP Rotrex Mount. Complete install of this mount requires the temporary removal of the alternator.
Current shot of the GBP Rotrex Mount. Complete install of this mount requires the temporary removal of the alternator.
0 2018/12/30 18:51:57
0 2018/12/30 19:02:50
0 2018/12/30 19:02:53
0 2018/12/30 19:02:55
0 2018/12/30 19:02:55