CMBS working or not?
CMBS working or not?
My ACC works great (worth every penny), but I am thinking the CMBS is not. I get no warning light to "BRAKE" as the manual says, and/or braking and beep if I approach a slower or stopped vehicle at speed. Also, no message in the MID that the system is broken. I've tried it several times and nothing happens; so I hit the brakes before I crash. Yes, the CMBS light works if I turn the system off. I'm at a loss. I could call the dealership, but I don't want to seem like I'm stupid (I am at times). Can anyone help?
My CMBS is pretty sensitive. Mine has even gone into stage two when a car cut me off.
try using the acc in stop and go traffic and let the acc go till the very end. It will turn off at about 20mph and start to flash brake soon after.
If not have the dealer check it out. Mine comes on quite a bit which I like.
try using the acc in stop and go traffic and let the acc go till the very end. It will turn off at about 20mph and start to flash brake soon after.
If not have the dealer check it out. Mine comes on quite a bit which I like.
My CMBS is pretty sensitive. Mine has even gone into stage two when a car cut me off.
try using the acc in stop and go traffic and let the acc go till the very end. It will turn off at about 20mph and start to flash brake soon after.
If not have the dealer check it out. Mine comes on quite a bit which I like.
try using the acc in stop and go traffic and let the acc go till the very end. It will turn off at about 20mph and start to flash brake soon after.
If not have the dealer check it out. Mine comes on quite a bit which I like.
Mine came up a few times (maybe it's the way I drive ;-).
But the 1st time my seat belt 'yanked' itself (to alert me), it scared the heck out of me!
The 2nd time worked real well though when some 'idiot' cut in front of me and again, my seat belt yanked itself twice + the 'BRAKE' alert flashing on the board.
Have that checked out would be my suggestion.
But the 1st time my seat belt 'yanked' itself (to alert me), it scared the heck out of me!
The 2nd time worked real well though when some 'idiot' cut in front of me and again, my seat belt yanked itself twice + the 'BRAKE' alert flashing on the board.
Have that checked out would be my suggestion.
I think I may be too aggressive when driving. I’m always triggering the CMBS and getting the brake light flashing. A couple times I was going to pass a car going really slow and coming up to the car it yanked the seat belt and killed the power. Then when I had to dodge the car I had no power and almost got rear ended. I don’t really like the CMBS and feel it is dangerous in some situations.
Trending Topics
Finally got the CMBS to work, but almost crapped myself as I had to get way too close for comfort to see if the system worked on a turning vehicle. If I did not know what I was doing I would be SOL now with major damage to the ZDX and who knows how much damage to the other car. No more experimenting.
Finally got the CMBS to work, but almost crapped myself as I had to get way too close for comfort to see if the system worked on a turning vehicle. If I did not know what I was doing I would be SOL now with major damage to the ZDX and who knows how much damage to the other car. No more experimenting.
Thread
Thread Starter
Forum
Replies
Last Post
mada51589
3G TL Problems & Fixes
80
Jan 9, 2025 04:40 PM
Luis J. Rodriguez
Audio, Video, Electronics & Navigation
2
Sep 12, 2015 10:00 PM
ahsm
3G TL Problems & Fixes
3
Sep 9, 2015 08:35 AM



