Remove dirt on not sure
05-02-2007, 08:21 PM
#1
East Coast Crew
Thread Starter
Remove dirt on not sure
Cleaning this
Hey guys. I want to clean part in the above link. It is circled in green. I was wondering how I would go about doing so? I tried scrubbing with quick detailer and those black spots aren't coming off. Any ideas guys?
Hey guys. I want to clean part in the above link. It is circled in green. I was wondering how I would go about doing so? I tried scrubbing with quick detailer and those black spots aren't coming off. Any ideas guys?
05-03-2007, 03:24 AM
#2
The Old Grey Whistle Test
A QD is non-abrasive and used for paintwork like clear coat. You need something that will abrade the 'spots' from the metal.
Use a cutting polish (Wenol Original (Red tube) followed by a fine metal polish (Auto Wenol Blue tube)- http//:www.autogeek.net ) to produce a bright shine apply products with a 100% cotton micro fibre cloth (DFTowel- http://www.dftowel.com)
Use a cutting polish (Wenol Original (Red tube) followed by a fine metal polish (Auto Wenol Blue tube)- http//:www.autogeek.net ) to produce a bright shine apply products with a 100% cotton micro fibre cloth (DFTowel- http://www.dftowel.com)
05-12-2007, 04:42 PM
#5
Senior Moderator
Originally Posted by saiko_cl_duck
you could clean that with some never dull and call it a day.
with som e elbow grease, it cleaned muffler tips that had never been cleaned since 2001!
Thread
Thread Starter
Forum
Replies
Last Post
dainmezron
4G TL (2009-2014)
16
10-16-2015 06:56 PM
detailersdomain
Wash & Wax
3
10-09-2015 10:13 PM