bored7one4

Hi,

I want to clean my engine with a pressure washer but is that safe? are there certain things i would need to cover or protect from the water?


thanks

RkFast

No pressure washer. Get yourself a bottle of Castrol Super Clean, go to town on the engine, being careful NOT to get any of that stuff on the paint, and then use a regular garden hose with a light to medium spray of water to rinse, again being careful not to get any of the cleaner on your paint.

boomersooner02000

http://www.detailedimage.com/Ask-a-P...ur-engine-bay/

This is the best guide and from one of the best detailer's in the country. I always wondered how you could get an engine bay so clean and this helped me a great deal.

AMUA6

iTrader: (7)

Another piece of advice is to make sure the engine is cool to the touch, then start it and have the engine running while you do this. Atleast that's what I've always done. And don't put any water directly at any electronics, esp your alternator.

ANC297

iTrader: (2)

I simply get a bucket with some dawn dish soap, (because it cuts grease), and a rag....Dip rag into soapy water and ring it out, then scrub away in the engine bay. Then use the mist setting on your hose and wash off gingerly. Then I dress it using Chemical Guys fade 2 black.

01tl4tl

go to the off topic section- wash and wax threads for complete diy help